Troubleshoot connecting computer to the server

Updated: June 30, 2011

Applies To: Windows Home Server 2011

This section contains Windows Home Server 2011 issues that may come across when connecting a computer to the server that is running Windows Home Server 2011.

  • During Connector software installation, pop-up window is displayed that asks if you want to install a device driver. When you click No, you receive an unexpected error

  • Cannot join a home computer to the server

  • Cannot connect a computer to the server remotely using Remote Desktop

  • Cannot connect a home computer that has Media Center enabled

  • I get “The installation is canceled” error when connecting a home computer

  • Auto logon does not work after you connect the computer to the server

  • Uninstalling a prerelease version of Connector software does not remove the pre-existing Logs folder

  • I receive “A computer with this name is already connected to the server” when I try to reconnect a computer to the server that did not connect successfully in an earlier attempt

  • To run this application, you must install one of the following versions of the .NET Framework: V4.0.30319. Contact your allocation publisher for instructions about obtaining the appropriate version of the .NET Framework

  • Cannot connect a client computer that is running Windows 7 Home to the server

  • After I connect a client computer to the server, I still cannot view the libraries on the server.

  • When I try to connect a client computer to the server, I receive the error message, “The server is not available. To resolve this issue, contact the person responsible for your network.”

  • When I try to connect a client computer to the server, I receive the error message, “An unexpected error has occurred. To resolve this issue, contact the person responsible for your network.”

Issue

During Connector software installation, pop-up window is displayed that asks if you want to install a device driver. When you click No, you receive an unexpected error.

Description

Backup virtual device driver is installed during home computer join. If you click No in the pop-up windows, the device driver is not installed causing the Connector software installation to fail.

Solution

Click Yes in the pop-up window to install the device driver.

Return to top

Issue

Cannot join a home computer to Windows Home Server 2011

Description

Computers that have non-ASCII characters in the computer name cannot join Windows Home Server 2011. You receive an error message that says An unexpected error has occurred.

Solution

Rename your computer with a name that contains ASCII characters only, and then run the Windows Server Connector Software again.

Return to top

Issue

Cannot connect a home computer that has Media Center enabled.

Description

If the home server password contains \”, it results in an error when connecting a home computer that has Media Center enabled.

Solution

You must change the Windows Home Server 2011 password and exclude \” from it and then try to connect the computer to the server again.

To change the server password

  1. Open the Windows Home Server 2011 Dashboard.

  2. Click Computers and Backup and select the Windows Home Server 2011 server.

  3. In Computers and Backup Tasks, click Change the server password.

  4. Follow the instructions to change the server password.

Return to top

Issue

I get “The Connector software installation is canceled” error message.

Description

Computers cannot connect to the server if the SYSTEM account of the pre-defined server folder does not have Full Control permissions in Windows Home Server 2011. You receive an error message that says The Connector software installation is canceled.

Solution

Verify the SYSTEM account permissions for all the server folders as follows:

Verify and modify SYSTEM account permissions for all the server folders

  1. Open the Windows Home Server 2011 Dashboard.

  2. Click Server Folders and Hard Drives, and then click Server Folders.

  3. Right-click a server folder, and then click Open the folder. This launches Windows Explorer, which displays a list of all folders and files that are contained within that server folder.

  4. Right-click a server folder in the tree, and click Properties.

  5. On <serverfoldername> Properties page, click Security.

  6. Verify that the Full control permissions is set to Allow. If not, click Edit to change the permissions for the SYSTEM account.

Return to top

Issue

Cannot connect a home computer to Windows Home Server 2011 using Remote Desktop.

Description

Remotely accessing a computer using Remote Desktop, and then connecting it to the Windows Home Server 2011 server using https://connect is not supported.

Solution

Connecting a home computer to the Windows Home Server 2011 server using https://<servername>/connect is not supported, if you are accessing the home computer remotely using Remote Desktop.

Return to top

Issue

Auto logon does not work after you connect a client computer to Windows Home Server 2011

Description

If auto logon is set for the user account, the setting is overwritten when you install the connector software.

Solution To resolve this issue, after you have install the Connector software, retain the password for the user account and reset auto logon for the account.

Note

The new Windows Home Server 2011 domain requires a password that meets the default password policy requirements.

Return to top

Issue

Uninstalling a prerelease version of Connector software does not remove the pre-existing Logs folder

Description

When you uninstall a pre-release (Beta or RC) version of the Windows Home Server 2011 connector software on a network computer, the uninstall program does not remove the pre-existing log files that are located in the \programdata\Microsoft\Windows Server\Logs folder of that computer. As a result, the log files can become corrupt when you install the RTM release version of the connector software.

Solution To prevent corruption of the log files, first uninstall the pre-release software, and then delete the Logs folder located in the %sysdir%\programdata\Microsoft\Windows Server folder before you install the RTM version of the connector software.

Return to top

Issue

I receive “A computer with this name is already connected to the server” when I try to reconnect a computer to the server that did not connect successfully in an earlier attempt

Description

When connecting a computer to the server is canceled or interrupted you may receive “A computer with this name is already connected to the server” error message on a subsequent attempt to connect to the server. This is because a certificate is issued when you tried to connect to the server the first time.

Solution Click Next and follow instructions to complete the Connect my computer to the server wizard if you are sure that no other computer with this name is already connected to the server.

Return to top

Issue

I receive “To run this application, you must install one of the following versions of the .NET Framework: V4.0.30319. Contact your allocation publisher for instructions about obtaining the appropriate version of the .NET Framework,” when I try to connect a client computer to the server.

Description

When connecting a computer to the server is canceled or interrupted you may receive “To run this application, you must install one of the following versions of the .NET Framework: V4.0.30319. Contact your allocation publisher for instructions about obtaining the appropriate version of the .NET Framework” error message when .NET Framework 4.0 does not install correctly. You cannot continue to connect the computer to the server.

Solution

Uninstall .NET Framework 4.0 manually using Uninstall or change a program in the Control Panel, and then try to connect the computer to the server again.

To uninstall .NET Framework 4.0

  1. On the client computer, click Start, and then click Control Panel.

  2. In the Control Panel, click Programs and Features, click Microsoft .NET Framework 4, and then click Uninstall/Change.

  3. When .NET Framework 4 is uninstalled successfully, restart the process of connecting the client computer to the server.

Return to top

Issue

When I attempt to connect a client computer that is running Window 7 Home to the server, the web page for running the connector software opens, but the client computer cannot connect to the server.

Description

If the router on your network has multicast enabled, the communications between the client computer and the server does not occur properly.

Solution

Disable multicast on your router. On some routers, it might include disabling RIP-2M routing protocol. For more information, refer to the documentation provided by the router manufacturer.

Return to top

Issue

After I connect a client computer to the server, I still cannot view the libraries on the server.

Description

A service is installed on the client computer that waits for a log on event. When that event occurs, the libraries on the server are mapped on the client computer. When you finish installing the connector software, the service is active but the user logon event has not occurred so the libraries are not mapped.

Solution

Restart the client computer and log on using your Windows Home Server 2011 user account and password. After the log on event, the libraries on the server are mapped on the client computer.

Return to top

Issue

When I try to connect a client computer to the server, I receive the error message, “The server is not available. To resolve this issue, contact the person responsible for your network.”

Description

The date and time might not be synchronized between the client computer and the server. Windows Home Server 2011 uses the time synchronization service to synchronize the date and time of computers running in a Windows Home Server 2011 network. Synchronized time is critical because the default authentication protocol uses server time as part of the authentication process. For example, if the clock on a client computer is not synchronized to the correct date and time, Windows Home Server 2011 authentication might falsely interpret a logon request as an intrusion attempt and deny access to the user.

Solution

  1. Make sure that the date and time on the client computer are correct. If the date and time are not correct, change them.

    To change the date and time on the client computer

    1. On the client computer, click Start, and then click Control Panel.

    2. In the Control Panel, click Clock, Language, and Region, and then click Date and Time.

    3. Click Change date and time, set the date and time to the correct date and time, and then click OK.

    4. Click OK, and then close the Control Panel.

    5. Try again to connect the client computer to the server.

  2. If you still cannot connect the client computer to the server, make sure that the date and time on the server are correct. If the date and time are not correct, change them.

    To change the date and time on the server

    1. Log on to the server using the password that you set up during Windows Home Server 2011 installation and configuration.

      Note

      If you are managing the server remotely, you must log on to the server using Remote Desktop Connection.

    2. Click Start, and then click Control Panel.

    3. In the Control Panel, click Clock, Language, and Region, and then click Date and Time.

    4. Click Change date and time, set the date and time to the correct date and time, and then click OK.

    5. Click OK, and then close the Control Panel.

    6. On the client computer, try again to connect the client computer to the server.

Return to top

Issue

When I try to connect a client computer to the server, I receive the error message, “An unexpected error has occurred. To resolve this issue, contact the person responsible for your network.”

Description

The WSS Certificate Web Service might not be running.

Solution

Start the WSS Certificate Web Service.

To start the WSS Certificate Web Service

  1. On the server, click Start, click Administrative Tools, and then click Internet Information Services (IIS) Manager.

  2. In the navigation pane, click WSS Certificate Web Service.

  3. In the Actions pane, click Start.

Return to top