How to: Synchronize a Pull Subscription (RMO Programming)

  • Article

You can synchronize pull subscriptions programmatically by using Replication Management Objects (RMO) and managed code access to replication agent functionalities. The classes you use to synchronize a pull subscription depend on the type of publication to which the subscription belongs.

Note

If you want to start a synchronization that runs autonomously without affecting your application, start the agent asynchronously. However, if you want to monitor the outcome of the synchronization and receive callbacks from the agent during the synchronization process (for example, to display a progress bar), you should start the agent synchronously. For Microsoft SQL Server 2005 Express Edition Subscribers, you must start the agent synchronously.

To synchronize a pull subscription to a snapshot or transactional publication

  1. Create a connection to the Subscriber by using the ServerConnection class.

  2. Create an instance of the TransPullSubscription class, and set the following properties:

  3. Call the LoadProperties method to get the remaining subscription properties. If this method returns false, verify that the subscription exists.

  4. Start the Distribution Agent at the Subscriber in one of the following ways:

    • Call the SynchronizeWithJob method on the instance of TransPullSubscription from step 2. This method starts the Distribution Agent asynchronously, and control immediately returns to your application while the agent job is running. You cannot call this method for SQL Server 2005 Express Edition Subscribers or if the subscription was created with a value of false for CreateSyncAgentByDefault (the default).

    • Get an instance of the TransSynchronizationAgent class from the SynchronizationAgent property, and call the Synchronize method. This method starts the agent synchronously, and control remains with the running agent job. During synchronous execution, you can handle the Status event while the agent is running.

      Note

      If you specified a value of false for CreateSyncAgentByDefault (the default) when you created the pull subscription, you also need to specify Distributor, DistributorSecurityMode, and optionally DistributorLogin and DistributorPassword because the agent job related metadata for the subscription is not available in MSsubscription_properties.

To synchronize a pull subscription to a merge publication

  1. Create a connection to the Subscriber by using the ServerConnection class.

  2. Create an instance of the MergePullSubscription class, and set the following properties:

    • The subscription database name for DatabaseName.
    • The name of the publication to which the subscription belongs for PublicationName.
    • The name of the published database for PublicationDBName.
    • The name of the Publisher for PublisherName.
    • The connection created in step 1 for ConnectionContext.

  3. Call the LoadProperties method to get the remaining subscription properties. If this method returns false, verify that the subscription exists.

  4. Start the Merge Agent at the Subscriber in one of the following ways:

Example

This example synchronizes a pull subscription to a transactional publication, where the agent is started asynchronously using the agent job.

// Define server, publication, and database names.
String subscriberName = subscriberInstance;
String publisherName = publisherInstance;
String publicationName = "AdvWorksProductTran";
String publicationDbName = "AdventureWorks";
String subscriptionDbName = "AdventureWorksReplica";

// Create a connection to the Subscriber.
ServerConnection conn = new ServerConnection(subscriberName);

TransPullSubscription subscription;

try
{
    // Connect to the Subscriber.
    conn.Connect();

    // Define subscription properties.
    subscription = new TransPullSubscription();
    subscription.ConnectionContext = conn;
    subscription.DatabaseName = subscriptionDbName;
    subscription.PublisherName = publisherName;
    subscription.PublicationDBName = publicationDbName;
    subscription.PublicationName = publicationName;

    // If the pull subscription and the job exists, start the agent job.
    if (subscription.LoadProperties() && subscription.AgentJobId != null)
    {
        subscription.SynchronizeWithJob();
    }
    else
    {
        // Do something here if the subscription does not exist.
        throw new ApplicationException(String.Format(
            "A subscription to '{0}' does not exists on {1}",
            publicationName, subscriberName));
    }
}
catch (Exception ex)
{
    // Do appropriate error handling here.
    throw new ApplicationException("The subscription could not be synchronized.", ex);
}
finally
{
    conn.Disconnect();
}

' Define server, publication, and database names.
Dim subscriberName As String = subscriberInstance
Dim publisherName As String = publisherInstance
Dim publicationName As String = "AdvWorksProductTran"
Dim publicationDbName As String = "AdventureWorks"
Dim subscriptionDbName As String = "AdventureWorksReplica"

' Create a connection to the Subscriber.
Dim conn As ServerConnection = New ServerConnection(subscriberName)

Dim subscription As TransPullSubscription

Try
    ' Connect to the Subscriber.
    conn.Connect()

    ' Define subscription properties.
    subscription = New TransPullSubscription()
    subscription.ConnectionContext = conn
    subscription.DatabaseName = subscriptionDbName
    subscription.PublisherName = publisherName
    subscription.PublicationDBName = publicationDbName
    subscription.PublicationName = publicationName

    ' If the pull subscription and the job exists, start the agent job.
    If subscription.LoadProperties() And Not subscription.AgentJobId Is Nothing Then
        subscription.SynchronizeWithJob()
    Else
        ' Do something here if the subscription does not exist.
        Throw New ApplicationException(String.Format( _
         "A subscription to '{0}' does not exists on {1}", _
         publicationName, subscriberName))
    End If
Catch ex As Exception
    ' Do appropriate error handling here.
    Throw New ApplicationException("The subscription could not be synchronized.", ex)
Finally
    conn.Disconnect()
End Try

This example synchronizes a pull subscription to a transactional publication, where the agent is started synchronously.

// Define the server, publication, and database names.
string subscriberName = subscriberInstance;
string publisherName = publisherInstance;
string publicationName = "AdvWorksProductTran";
string subscriptionDbName = "AdventureWorksReplica";
string publicationDbName = "AdventureWorks";

// Create a connection to the Subscriber.
ServerConnection conn = new ServerConnection(subscriberName);

TransPullSubscription subscription;

try
{
    // Connect to the Subscriber.
    conn.Connect();

    // Define the pull subscription.
    subscription = new TransPullSubscription();
    subscription.ConnectionContext = conn;
    subscription.DatabaseName = subscriptionDbName;
    subscription.PublisherName = publisherName;
    subscription.PublicationDBName = publicationDbName;
    subscription.PublicationName = publicationName;

    // If the pull subscription exists, then start the synchronization.
    if (subscription.LoadProperties())
    {
        // Check that we have enough metadata to start the agent.
        if (subscription.PublisherSecurity != null)
        {
            // Synchronously start the Distribution Agent for the subscription.
            subscription.SynchronizationAgent.Synchronize();
        }
        else
        {
            throw new ApplicationException("There is insufficent metadata to " +
                "synchronize the subscription. Recreate the subscription with " +
                "the agent job or supply the required agent properties at run time.");
        }
    }
    else
    {
        // Do something here if the pull subscription does not exist.
        throw new ApplicationException(String.Format(
            "A subscription to '{0}' does not exist on {1}",
            publicationName, subscriberName));
    }
}
catch (Exception ex)
{
    // Implement appropriate error handling here.
    throw new ApplicationException("The subscription could not be " +
        "synchronized. Verify that the subscription has " +
        "been defined correctly.", ex);
}
finally
{
    conn.Disconnect();
}

' Define the server, publication, and database names.
Dim subscriberName As String = subscriberInstance
Dim publisherName As String = publisherInstance
Dim publicationName As String = "AdvWorksProductTran"
Dim subscriptionDbName As String = "AdventureWorksReplica"
Dim publicationDbName As String = "AdventureWorks"

' Create a connection to the Subscriber.
Dim conn As ServerConnection = New ServerConnection(subscriberName)

Dim subscription As TransPullSubscription

Try
    ' Connect to the Subscriber.
    conn.Connect()

    ' Define the pull subscription.
    subscription = New TransPullSubscription()
    subscription.ConnectionContext = conn
    subscription.DatabaseName = subscriptionDbName
    subscription.PublisherName = publisherName
    subscription.PublicationDBName = publicationDbName
    subscription.PublicationName = publicationName

    ' If the pull subscription exists, then start the synchronization.
    If subscription.LoadProperties() Then
        ' Check that we have enough metadata to start the agent.
        If Not subscription.PublisherSecurity Is Nothing Then

            ' Write agent output to a log file.
            subscription.SynchronizationAgent.Output = "distagent.log"
            subscription.SynchronizationAgent.OutputVerboseLevel = 2

            ' Synchronously start the Distribution Agent for the subscription.
            subscription.SynchronizationAgent.Synchronize()
        Else
            Throw New ApplicationException("There is insufficent metadata to " + _
             "synchronize the subscription. Recreate the subscription with " + _
             "the agent job or supply the required agent properties at run time.")
        End If
    Else
        ' Do something here if the pull subscription does not exist.
        Throw New ApplicationException(String.Format( _
         "A subscription to '{0}' does not exist on {1}", _
         publicationName, subscriberName))
    End If
Catch ex As Exception
    ' Implement appropriate error handling here.
    Throw New ApplicationException("The subscription could not be " + _
     "synchronized. Verify that the subscription has " + _
     "been defined correctly.", ex)
Finally
    conn.Disconnect()
End Try

This example synchronizes a pull subscription to a merge publication, where the agent is started asynchronously using the agent job.

// Define server, publication, and database names.
String subscriberName = subscriberInstance;
String publisherName = publisherInstance;
String publicationName = "AdvWorksSalesOrdersMerge";
String publicationDbName = "AdventureWorks";
String subscriptionDbName = "AdventureWorksReplica";

// Create a connection to the Subscriber.
ServerConnection conn = new ServerConnection(subscriberName);

MergePullSubscription subscription;

try
{
    // Connect to the Subscriber.
    conn.Connect();

    // Define subscription properties.
    subscription = new MergePullSubscription();
    subscription.ConnectionContext = conn;
    subscription.DatabaseName = subscriptionDbName;
    subscription.PublisherName = publisherName;
    subscription.PublicationDBName = publicationDbName;
    subscription.PublicationName = publicationName;

    // If the pull subscription and the job exists, start the agent job.
    if (subscription.LoadProperties() && subscription.AgentJobId != null)
    {
        subscription.SynchronizeWithJob();
    }
    else
    {
        // Do something here if the subscription does not exist.
        throw new ApplicationException(String.Format(
            "A subscription to '{0}' does not exists on {1}",
            publicationName, subscriberName));
    }
}
catch (Exception ex)
{
    // Do appropriate error handling here.
    throw new ApplicationException("The subscription could not be synchronized.", ex);
}
finally
{
    conn.Disconnect();
}

' Define server, publication, and database names.
Dim subscriberName As String = subscriberInstance
Dim publisherName As String = publisherInstance
Dim publicationName As String = "AdvWorksSalesOrdersMerge"
Dim publicationDbName As String = "AdventureWorks"
Dim subscriptionDbName As String = "AdventureWorksReplica"

' Create a connection to the Subscriber.
Dim conn As ServerConnection = New ServerConnection(subscriberName)

Dim subscription As MergePullSubscription

Try
    ' Connect to the Subscriber.
    conn.Connect()

    ' Define subscription properties.
    subscription = New MergePullSubscription()
    subscription.ConnectionContext = conn
    subscription.DatabaseName = subscriptionDbName
    subscription.PublisherName = publisherName
    subscription.PublicationDBName = publicationDbName
    subscription.PublicationName = publicationName

    ' If the pull subscription and the job exists, start the agent job.
    If subscription.LoadProperties() And Not subscription.AgentJobId Is Nothing Then
        subscription.SynchronizeWithJob()
    Else
        ' Do something here if the subscription does not exist.
        Throw New ApplicationException(String.Format( _
         "A subscription to '{0}' does not exists on {1}", _
         publicationName, subscriberName))
    End If
Catch ex As Exception
    ' Do appropriate error handling here.
    Throw New ApplicationException("The subscription could not be synchronized.", ex)
Finally
    conn.Disconnect()
End Try

This example synchronizes a pull subscription to a merge publication, where the agent is started synchronously.

// Define the server, publication, and database names.
string subscriberName = subscriberInstance;
string publisherName = publisherInstance;
string publicationName = "AdvWorksSalesOrdersMerge";
string subscriptionDbName = "AdventureWorksReplica";
string publicationDbName = "AdventureWorks";

// Create a connection to the Subscriber.
ServerConnection conn = new ServerConnection(subscriberName);

MergePullSubscription subscription;

try
{
    // Connect to the Subscriber.
    conn.Connect();

    // Define the pull subscription.
    subscription = new MergePullSubscription();
    subscription.ConnectionContext = conn;
    subscription.DatabaseName = subscriptionDbName;
    subscription.PublisherName = publisherName;
    subscription.PublicationDBName = publicationDbName;
    subscription.PublicationName = publicationName;

    // If the pull subscription exists, then start the synchronization.
    if (subscription.LoadProperties())
    {
        // Check that we have enough metadata to start the agent.
        if (subscription.PublisherSecurity != null || subscription.DistributorSecurity != null)
        {
            // Synchronously start the Merge Agent for the subscription.
            subscription.SynchronizationAgent.Synchronize();
        }
        else
        {
            throw new ApplicationException("There is insufficent metadata to " +
                "synchronize the subscription. Recreate the subscription with " +
                "the agent job or supply the required agent properties at run time.");
        }
    }
    else
    {
        // Do something here if the pull subscription does not exist.
        throw new ApplicationException(String.Format(
            "A subscription to '{0}' does not exist on {1}",
            publicationName, subscriberName));
    }
}
catch (Exception ex)
{
    // Implement appropriate error handling here.
    throw new ApplicationException("The subscription could not be " +
        "synchronized. Verify that the subscription has " +
        "been defined correctly.", ex);
}
finally
{
    conn.Disconnect();
}

' Define the server, publication, and database names.
Dim subscriberName As String = subscriberInstance
Dim publisherName As String = publisherInstance
Dim publicationName As String = "AdvWorksSalesOrdersMerge"
Dim subscriptionDbName As String = "AdventureWorksReplica"
Dim publicationDbName As String = "AdventureWorks"

' Create a connection to the Subscriber.
Dim conn As ServerConnection = New ServerConnection(subscriberName)

Dim subscription As MergePullSubscription

Try
    ' Connect to the Subscriber.
    conn.Connect()

    ' Define the pull subscription.
    subscription = New MergePullSubscription()
    subscription.ConnectionContext = conn
    subscription.DatabaseName = subscriptionDbName
    subscription.PublisherName = publisherName
    subscription.PublicationDBName = publicationDbName
    subscription.PublicationName = publicationName

    ' If the pull subscription exists, then start the synchronization.
    If subscription.LoadProperties() Then
        ' Check that we have enough metadata to start the agent.
        If Not subscription.PublisherSecurity Is Nothing Or subscription.DistributorSecurity Is Nothing Then

            ' Output agent messages to the console. 
            subscription.SynchronizationAgent.OutputVerboseLevel = 1
            subscription.SynchronizationAgent.Output = ""

            ' Synchronously start the Merge Agent for the subscription.
            subscription.SynchronizationAgent.Synchronize()
        Else
            Throw New ApplicationException("There is insufficent metadata to " + _
             "synchronize the subscription. Recreate the subscription with " + _
             "the agent job or supply the required agent properties at run time.")
        End If
    Else
        ' Do something here if the pull subscription does not exist.
        Throw New ApplicationException(String.Format( _
         "A subscription to '{0}' does not exist on {1}", _
         publicationName, subscriberName))
    End If
Catch ex As Exception
    ' Implement appropriate error handling here.
    Throw New ApplicationException("The subscription could not be " + _
     "synchronized. Verify that the subscription has " + _
     "been defined correctly.", ex)
Finally
    conn.Disconnect()
End Try

This example synchronizes a pull subscription to a merge publication using Web synchronization. The subscription was created without the agent job and related subscription metadata, so the agent must be started synchronously and additional subscription information is supplied.

// Define the server, publication, and database names.
string subscriberName = subscriberInstance;
string publisherName = publisherInstance;
string distributorName = distributorInstance;
string publicationName = "AdvWorksSalesOrdersMerge";
string subscriptionDbName = "AdventureWorksReplica";
string publicationDbName = "AdventureWorks";
string hostname = @"adventure-works\garrett1";
string webSyncUrl = "https://" + publisherInstance + "/SalesOrders/replisapi.dll";

// Create a connection to the Subscriber.
ServerConnection conn = new ServerConnection(subscriberName);

MergePullSubscription subscription;
MergeSynchronizationAgent agent;

try
{
    // Connect to the Subscriber.
    conn.Connect();

    // Define the pull subscription.
    subscription = new MergePullSubscription();
    subscription.ConnectionContext = conn;
    subscription.DatabaseName = subscriptionDbName;
    subscription.PublisherName = publisherName;
    subscription.PublicationDBName = publicationDbName;
    subscription.PublicationName = publicationName;

    // If the pull subscription exists, then start the synchronization.
    if (subscription.LoadProperties())
    {
        // Get the agent for the subscription.
        agent = subscription.SynchronizationAgent;

        // Check that we have enough metadata to start the agent.
        if (agent.PublisherSecurityMode == null)
        {
            // Set the required properties that could not be returned
            // from the MSsubscription_properties table. 
            agent.PublisherSecurityMode = SecurityMode.Integrated;
            agent.DistributorSecurityMode = SecurityMode.Integrated;
            agent.Distributor = publisherName;
            agent.HostName = hostname;

            // Set optional Web synchronization properties.
            agent.UseWebSynchronization = true;
            agent.InternetUrl = webSyncUrl;
            agent.InternetSecurityMode = SecurityMode.Standard;
            agent.InternetLogin = winLogin;
            agent.InternetPassword = winPassword;
        }
        // Enable agent output to the console.
        agent.OutputVerboseLevel = 1;
        agent.Output = "";

        // Synchronously start the Merge Agent for the subscription.
        agent.Synchronize();
    }
    else
    {
        // Do something here if the pull subscription does not exist.
        throw new ApplicationException(String.Format(
            "A subscription to '{0}' does not exist on {1}",
            publicationName, subscriberName));
    }
}
catch (Exception ex)
{
    // Implement appropriate error handling here.
    throw new ApplicationException("The subscription could not be " +
        "synchronized. Verify that the subscription has " +
        "been defined correctly.", ex);
}
finally
{
    conn.Disconnect();
}

' Define the server, publication, and database names.
Dim subscriberName As String = subscriberInstance
Dim publisherName As String = publisherInstance
Dim publicationName As String = "AdvWorksSalesOrdersMerge"
Dim subscriptionDbName As String = "AdventureWorksReplica"
Dim publicationDbName As String = "AdventureWorks"
Dim hostname As String = "adventure-works\garrett1"
Dim webSyncUrl As String = "https://" + publisherInstance + "/SalesOrders/replisapi.dll"

' Create a connection to the Subscriber.
Dim conn As ServerConnection = New ServerConnection(subscriberName)

Dim subscription As MergePullSubscription
Dim agent As MergeSynchronizationAgent

Try
    ' Connect to the Subscriber.
    conn.Connect()

    ' Define the pull subscription.
    subscription = New MergePullSubscription()
    subscription.ConnectionContext = conn
    subscription.DatabaseName = subscriptionDbName
    subscription.PublisherName = publisherName
    subscription.PublicationDBName = publicationDbName
    subscription.PublicationName = publicationName

    ' If the pull subscription exists, then start the synchronization.
    If subscription.LoadProperties() Then
        ' Get the agent for the subscription.
        agent = subscription.SynchronizationAgent

        ' Check that we have enough metadata to start the agent.
        If agent.PublisherSecurityMode = Nothing Then
            ' Set the required properties that could not be returned
            ' from the MSsubscription_properties table. 
            agent.PublisherSecurityMode = SecurityMode.Integrated
            agent.Distributor = publisherInstance
            agent.DistributorSecurityMode = SecurityMode.Integrated
            agent.HostName = hostname

            ' Set optional Web synchronization properties.
            agent.UseWebSynchronization = True
            agent.InternetUrl = webSyncUrl
            agent.InternetSecurityMode = SecurityMode.Standard
            agent.InternetLogin = winLogin
            agent.InternetPassword = winPassword
        End If

        ' Enable agent logging to the console.
        agent.OutputVerboseLevel = 1
        agent.Output = ""

        ' Synchronously start the Merge Agent for the subscription.
        agent.Synchronize()
    Else
        ' Do something here if the pull subscription does not exist.
        Throw New ApplicationException(String.Format( _
         "A subscription to '{0}' does not exist on {1}", _
         publicationName, subscriberName))
    End If
Catch ex As Exception
    ' Implement appropriate error handling here.
    Throw New ApplicationException("The subscription could not be " + _
     "synchronized. Verify that the subscription has " + _
     "been defined correctly.", ex)
Finally
    conn.Disconnect()
End Try

See Also

Tasks

How to: Create a Pull Subscription (RMO Programming)
How to: Synchronize a Pull Subscription (Replication Programming)

Other Resources

Synchronizing Data
Programming with Replication Management Objects

Help and Information

Getting SQL Server 2005 Assistance