Share via


Errors 3000 - 3999

Error

Severity

Event Logged

Description (Message Text)

3002

16

No

Cannot BACKUP or RESTORE a database snapshot.

3003

10

No

This BACKUP WITH DIFFERENTIAL will be based on more than one file backup. All those file backups must be restored before attempting to restore this differential backup.

3004

16

No

The primary filegroup cannot be backed up as a file backup because the database is using the SIMPLE recovery model. Consider taking a partial backup by specifying READ_WRITE_FILEGROUPS.

3005

10

No

The differential partial backup is including a read-only filegroup, '%ls'. This filegroup was read-write when the base partial backup was created, but was later changed to read-only access. We recommend that you create a separate file backup of the '%ls' filegroup now, and then create a new partial backup to provide a new base for later differential partial backups.

3006

16

No

The differential backup is not allowed because it would be based on more than one base backup. Multi-based differential backups are not allowed in the simple recovery model, and are never allowed for partial differential backups.

3007

16

No

The backup of the file or filegroup "%ls" is not permitted because it is not online. BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data.

3008

16

No

The specified device type is not supported for backup mirroring.

3009

16

No

Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database. The backup/restore operation was still successful.

3010

16

No

Invalid backup mirror specification. All mirrors must have the same number of members.

3011

16

No

All backup devices must be of the same general class (for example, DISK and TAPE).

3012

17

No

VDI ran out of buffer when SQL Server attempted to send differential information to SQL Writer.

3013

16

No

%hs is terminating abnormally.

3014

10

No

%hs successfully processed %I64d pages in %d.%03d seconds (%d.%03d MB/sec).

3015

10

No

%hs is not yet implemented.

3016

16

No

Backup of file '%ls' is not permitted because it contains pages subject to an online restore sequence. Complete the restore sequence before taking the backup, or restrict the backup to exclude this file.

3017

16

No

The restart-checkpoint file '%ls' could not be opened. Operating system error '%ls'. Correct the problem, or reissue the command without RESTART.

3018

10

No

The restart-checkpoint file '%ls' was not found. The RESTORE command will continue from the beginning as if RESTART had not been specified.

3019

16

No

The restart-checkpoint file '%ls' is from a previous interrupted RESTORE operation and is inconsistent with the current RESTORE command. The restart command must use the same syntax as the interrupted command, with the addition of the RESTART clause. Alternatively, reissue the current statement without the RESTART clause.

3021

16

No

Cannot perform a backup or restore operation within a transaction.

3022

10

No

This backup is a file backup of read-write data from a database that uses the simple recovery model. This is only appropriate if you plan to set the filegroup to read-only followed by a differential file backup. Consult Books Online for more information on managing read-only data for the simple recovery model. In particular, consider how partial backups are used.

3023

16

No

Backup, file manipulation operations (such as ALTER DATABASE ADD FILE) and encryption changes on a database must be serialized. Reissue the statement after the current backup or file manipulation operation is completed.

3024

16

No

You can only perform a full backup of the master database. Use BACKUP DATABASE to back up the entire master database.

3025

16

No

Missing database name. Reissue the statement specifying a valid database name.

3027

16

No

The filegroup "%.*ls" is not part of database "%.*ls".

3028

10

No

The restart-checkpoint file '%ls' was corrupted and is being ignored. The RESTORE command will continue from the beginning as if RESTART had not been specified.

3031

16

No

Option '%ls' conflicts with option(s) '%ls'. Remove the conflicting option and reissue the statement.

3032

16

No

One or more of the options (%ls) are not supported for this statement. Review the documentation for supported options.

3033

16

No

BACKUP DATABASE cannot be used on a database opened in emergency mode.

3034

16

No

No files were selected to be processed. You may have selected one or more filegroups that have no members.

3035

16

No

Cannot perform a differential backup for database "%ls", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option.

3036

16

No

The database "%ls" is in warm-standby state (set by executing RESTORE WITH STANDBY) and cannot be backed up until the entire restore sequence is completed.

3038

16

No

The file name "%ls" is invalid as a backup device name. Reissue the BACKUP statement with a valid file name.

3039

16

No

Cannot perform a differential backup for file '%ls' because a current file backup does not exist. Reissue BACKUP DATABASE omitting the WITH DIFFERENTIAL option.

3040

10

No

An error occurred while informing replication of the backup. The backup will continue, but the replication environment should be inspected.

3041

16

Yes

BACKUP failed to complete the command %.*ls. Check the backup application log for detailed messages.

3042

10

No

BACKUP WITH CONTINUE_AFTER_ERROR successfully generated a backup of the damaged database. Refer to the SQL Server error log for information about the errors that were encountered.

3043

16

No

BACKUP '%ls' detected an error on page (%d:%d) in file '%ls'.

3044

16

No

Invalid zero-length device name. Reissue the BACKUP statement with a valid device name.

3045

16

No

BACKUP or RESTORE requires the NTFS file system for FILESTREAM and full-text support. The path "%.*ls" is not usable.

3046

16

No

Inconsistent metadata has been encountered. The only possible backup operation is a tail-log backup using the WITH CONTINUE_AFTER_ERROR or NO_TRUNCATE option.

3047

16

No

The BackupDirectory registry key is not configured correctly. This key should specify the root path where disk backup files are stored when full path names are not provided. This path is also used to locate restart checkpoint files for RESTORE.

3049

16

No

BACKUP detected corruption in the database log. Check the errorlog for more information.

3050

16

No

SQL Server could not send the differential information for database file '%ls' of database '%ls\\%ls' to the backup application because the differential information is too large to fit in memory, and an attempt to use a temporary file has failed.

3051

16

No

BACKUP LOG was unable to maintain mirroring consistency for database '%ls'. Database mirroring has been suspended.

3054

16

No

Differential file backups can include only read-only data for databases using the simple recovery model. Consider taking a partial backup by specifying READ_WRITE_FILEGROUPS.

3055

16

No

Backup destination "%.*ls" supports a FILESTREAM filegroup. This filegroup cannot be used as a backup destination. Rerun the BACKUP statement with a valid backup destination.

3056

16

No

The backup operation has detected an unexpected file in a FILESTREAM container. The backup operation will continue and include file '%ls'.

3057

16

No

Invalid device name. The length of the device name provided exceeds supported limit (maximum length is:%d). Reissue the BACKUP statement with a valid device name.

3058

10

No

File or device name exceeds the supported limit (maximum length is:%d) and will be truncated: %.*ls.

3098

16

No

The backup cannot be performed because '%ls' was requested after the media was formatted with an incompatible structure. To append to this media set, either omit '%ls' or specify '%ls'. Alternatively, you can create a new media set by using WITH FORMAT in your BACKUP statement. If you use WITH FORMAT on an existing media set, all its backup sets will be overwritten.

3101

16

No

Exclusive access could not be obtained because the database is in use.

3102

16

No

%ls cannot process database '%ls' because it is in use by this session. It is recommended that the master database be used when performing this operation.

3103

16

No

A partial restore sequence cannot be initiated by this command. To initiate a partial restore sequence, use the WITH PARTIAL clause of the RESTORE statement and provide a backup set which includes a full copy of at least the primary data file. The WITH PARTIAL clause of the RESTORE statement may not be used for any other purpose.

3104

16

No

RESTORE cannot operate on database '%ls' because it is configured for database mirroring. Use ALTER DATABASE to remove mirroring if you intend to restore the database.

3105

16

No

RESTORE cannot restore any more pages into file '%ls' because the maximum number of pages (%d) are already being restored. Either complete the restore sequence for the existing pages, or use RESTORE FILE to restore all pages in the file.

3106

16

No

The filegroup "%ls" is ambiguous. The identity in the backup set does not match the filegroup that is currently defined in the online database. To force the use of the filegroup in the backup set, take the database offline and then reissue the RESTORE command.

3107

16

No

The file "%ls" is ambiguous. The identity in the backup set does not match the file that is currently defined in the online database. To force the use of the file in the backup set, take the database offline and then reissue the RESTORE command.

3108

16

No

To restore the master database, the server must be running in single-user mode. For information on starting in single-user mode, see "How to: Start an Instance of SQL Server (sqlservr.exe)" in Books Online.

3109

16

No

Master can only be restored and fully recovered in a single step using a full database backup. Options such as NORECOVERY, STANDBY, and STOPAT are not supported.

3110

14

No

User does not have permission to RESTORE database '%.*ls'.

3111

16

No

Page %S_PGID is a control page which cannot be restored in isolation. To repair this page, the entire file must be restored.

3112

16

No

Cannot restore any database other than master when the server is in single user mode.

3113

16

No

Invalid data was detected.

3115

16

No

The database is using the simple recovery model. It is not possible to restore a subset of the read-write data.

3116

16

No

The supplied backup is not on the same recovery path as the database, and is ineligible for use for an online file restore.

3117

16

No

The log or differential backup cannot be restored because no files are ready to rollforward.

3118

16

No

The database "%ls" does not exist. RESTORE can only create a database when restoring either a full backup or a file backup of the primary file.

3119

16

No

Problems were identified while planning for the RESTORE statement. Previous messages provide details.

3120

16

No

This backup set will not be restored because all data has already been restored to a point beyond the time covered by this backup set.

3121

16

No

The file "%ls" is on a recovery path that is inconsistent with application of this backup set. RESTORE cannot continue.

3122

16

No

File initialization failed. RESTORE cannot continue.

3123

16

No

Invalid database name '%.*ls' specified for backup or restore operation.

3125

16

No

The database is using the simple recovery model. The data in the backup it is not consistent with the current state of the database. Restoring more data is required before recovery is possible. Either restore a full file backup taken since the data was marked read-only, or restore the most recent base backup for the target data followed by a differential file backup.

3127

16

Yes

The file '%.*ls' of restored database '%ls' is being left in the defunct state because the database is using the simple recovery model and the file is marked for read-write access. Therefore, only read-only files can be recovered by piecemeal restore.

3128

16

No

File '%ls' has an unsupported page size (%d).

3129

16

No

The contents of the file "%ls" are not consistent with a transition into the restore sequence. A restore from a backup set may be required.

3130

10

No

The filegroup "%ls" is selected. At the time of backup it was known by the name "%ls"'. RESTORE will continue operating upon the renamed filegroup.

3131

10

No

The file "%ls" is selected. At the time of backup it was known by the name "%ls". RESTORE will continue operating upon the renamed file.

3132

16

No

The media set has %d media families but only %d are provided. All members must be provided.

3133

16

No

The volume on device "%ls" is sequence number %d of media family %d, but sequence number %d of media family %d is expected. Check that the device specifications and loaded media are correct.

3134

10

Yes

The differential base attribute for file '%ls' of database '%ls' has been reset because the file has been restored from a backup taken on a conflicting recovery path. The restore was allowed because the file was read-only and was consistent with the current status of the database. Any future differential backup of this file will require a new differential base.

3135

16

No

The backup set in file '%ls' was created by %hs and cannot be used for this restore operation.

3136

16

No

This differential backup cannot be restored because the database has not been restored to the correct earlier state.

3137

16

No

Database cannot be reverted. Either the primary or the snapshot names are improperly specified, all other snapshots have not been dropped, or there are missing files.

3138

16

No

The database cannot be reverted because FILESTREAM BLOBs are present.

3139

16

No

Restore to snapshot is not allowed with the master database.

3140

16

No

Could not adjust the space allocation for file '%ls'.

3141

16

No

The database to be restored was named '%ls'. Reissue the statement using the WITH REPLACE option to overwrite the '%ls' database.

3142

16

No

File "%ls" cannot be restored over the existing "%ls". Reissue the RESTORE statement using WITH REPLACE to overwrite pre-existing files, or WITH MOVE to identify an alternate location.

3143

16

No

The data set on device '%ls' is not a SQL Server backup set.

3144

16

No

File '%.*ls' was not backed up in file %d on device '%ls'. The file cannot be restored from this backup set.

3145

16

No

The STOPAT option is not supported for databases that use the SIMPLE recovery model.

3147

16

No

Backup and restore operations are not allowed on database tempdb.

3148

16

No

This RESTORE statement is invalid in the current context. The 'Recover Data Only' option is only defined for secondary filegroups when the database is in an online state. When the database is in an offline state filegroups cannot be specified.

3149

16

No

The file or filegroup "%ls" is not in a valid state for the "Recover Data Only" option to be used. Only secondary files in the OFFLINE or RECOVERY_PENDING state can be processed.

3150

10

No

The master database has been successfully restored. Shutting down SQL Server.

3151

21

Yes

Failed to restore master database. Shutting down SQL Server. Check the error logs, and rebuild the master database. For more information about how to rebuild the master database, see SQL Server Books Online.

3153

16

No

The database is already fully recovered.

3154

16

No

The backup set holds a backup of a database other than the existing '%ls' database.

3155

16

No

The RESTORE operation cannot proceed because one or more files have been added or dropped from the database since the backup set was created.

3156

16

No

File '%ls' cannot be restored to '%ls'. Use WITH MOVE to identify a valid location for the file.

3159

16

No

The tail of the log for the database "%ls" has not been backed up. Use BACKUP LOG WITH NORECOVERY to backup the log if it contains work you do not want to lose. Use the WITH REPLACE or WITH STOPAT clause of the RESTORE statement to just overwrite the contents of the log.

3161

16

No

The primary file is unavailable. It must be restored or otherwise made available.

3163

16

No

The transaction log was damaged. All data files must be restored before RESTORE LOG can be attempted.

3165

16

No

Database '%ls' was restored, however an error was encountered while replication was being restored/removed. The database has been left offline. See the topic MSSQL_ENG003165 in SQL Server Books Online.

3166

16

No

RESTORE DATABASE could not drop database '%ls'. Drop the database and then reissue the RESTORE DATABASE statement.

3167

16

No

RESTORE could not start database '%ls'.

3168

16

No

The backup of the system database on the device %ls cannot be restored because it was created by a different version of the server (%ls) than this server (%ls).

3169

16

No

The database was backed up on a server running version %ls. That version is incompatible with this server, which is running version %ls. Either restore the database on a server that supports the backup, or use a backup that is compatible with this server.

3170

16

No

The STANDBY filename is invalid.

3171

16

No

File %ls is defunct and cannot be restored into the online database.

3172

16

No

Filegroup %ls is defunct and cannot be restored into the online database.

3173

16

No

The STOPAT clause provided with this RESTORE statement indicates that the tail of the log contains changes that must be backed up to reach the target point in time. The tail of the log for the database "%ls" has not been backed up. Use BACKUP LOG WITH NORECOVERY to back up the log, or use the WITH REPLACE clause in your RESTORE statement to overwrite the tail of the log.

3174

16

No

The file '%ls' cannot be moved by this RESTORE operation.

3175

10

No

RESTORE FILEGROUP="%ls" was specified, but not all of its files are present in the backup set. File "%ls" is missing. RESTORE will continue, but if you want all files to be restored, you must restore other backup sets.

3176

16

No

File '%ls' is claimed by '%ls'(%d) and '%ls'(%d). The WITH MOVE clause can be used to relocate one or more files.

3178

16

No

File %ls is not in the correct state to have this differential backup applied to it.

3179

16

No

The system database cannot be moved by RESTORE.

3180

16

No

This backup cannot be restored using WITH STANDBY because a database upgrade is needed. Reissue the RESTORE without WITH STANDBY.

3181

10

No

Attempting to restore this backup may encounter storage space problems. Subsequent messages will provide details.

3182

16

No

The backup set cannot be restored because the database was damaged when the backup occurred. Salvage attempts may exploit WITH CONTINUE_AFTER_ERROR.

3183

16

No

RESTORE detected an error on page (%d:%d) in database "%ls" as read from the backup set.

3184

10

No

RESTORE WITH CONTINUE_AFTER_ERROR was successful but some damage was encountered. Inconsistencies in the database are possible.

3185

16

No

RESTORE cannot apply this backup set because the database is suspect. Restore a backup set that repairs the damage.

3186

16

No

The backup set has been damaged. RESTORE will not attempt to apply this backup set.

3187

16

No

RESTORE WITH CHECKSUM cannot be specified because the backup set does not contain checksum information.

3188

10

No

The backup set was written with damaged data by a BACKUP WITH CONTINUE_AFTER_ERROR.

3189

16

No

Damage to the backup set was detected.

3190

16

No

Filegroup '%ls' cannot be restored because it does not exist in the backup set.

3191

16

No

Restore cannot continue because file '%ls' cannot be written. Ensure that all files in the database are writable.

3192

10

No

Restore was successful but deferred transactions remain. These transactions cannot be resolved because there are data that is unavailable. Either use RESTORE to make that data available or drop the filegroups if you never need this data again. Dropping the filegroup results in a defunct filegroup.

3194

16

No

Page %S_PGID is beyond the end of the file. Only pages that are in the current range of the file can be restored.

3195

16

No

Page %S_PGID cannot be restored from this backup set. RESTORE PAGE can only be used from full backup sets or from the first log or differential backup taken since the file was added to the database.

3196

16

No

RESTORE master WITH SNAPSHOT is not supported. To restore master from a snapshot backup, stop the service and copy the data and log file.

3197

10

Yes

I/O is frozen on database %ls. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.

3198

10

Yes

I/O was resumed on database %ls. No user action is required.

3199

16

No

RESTORE requires MAXTRANSFERSIZE=%u but %u was specified.

3201

16

No

Cannot open backup device '%ls'. Operating system error %ls.

3202

16

No

Write on "%ls" failed: %ls

3203

16

No

Read on "%ls" failed: %ls

3204

16

No

The backup or restore was aborted.

3205

16

No

Too many backup devices specified for backup or restore; only %d are allowed.

3206

16

No

Backup device '%.*ls' does not exist. To view existing backup devices, use the sys.backup_devices catalog view. To create a new backup device use either sp_addumpdevice or SQL Server Management Studio.

3207

16

No

Backup or restore requires at least one backup device. Rerun your statement specifying a backup device.

3208

16

No

Unexpected end of file while reading beginning of backup set. Confirm that the media contains a valid SQL Server backup set, and see the console error log for more details.

3209

16

No

Operation is not supported on user instances.

3210

16

No

The mirror member in drive "%ls" is inconsistent with the mirror member in drive "%ls".

3211

10

No

%d percent processed.

3212

16

No

The mirror device "%ls" and the mirror device "%ls" have different device specifications.

3213

16

No

Unable to unload one or more tapes. See the error log for details.

3214

16

No

Too many backup mirrors are specified. Only %d are allowed.

3215

16

No

Use WITH FORMAT to create a new mirrored backup set.

3216

16

No

RESTORE REWINDONLY is only applicable to tape devices.

3217

16

No

Invalid value specified for %ls parameter.

3218

16

No

Backup mirroring is not available in this edition of SQL Server. See Books Online for more details on feature support in different SQL Server editions.

3219

16

No

The file or filegroup "%.*ls" cannot be selected for this operation.

3221

16

No

The ReadFileEx system function executed on file '%ls' only read %d bytes, expected %d.

3222

16

No

The WriteFileEx system function executed on file '%ls' only wrote %d bytes, expected %d.

3224

16

No

Cannot create worker thread.

3227

16

No

The backup media on "%ls" is part of media family %d which has already been processed on "%ls". Ensure that backup devices are correctly specified. For tape devices, ensure that the correct volumes are loaded.

3229

16

No

Request for device '%ls' timed out.

3230

16

No

Operation on device '%ls' exceeded retry count.

3231

16

No

The media loaded on "%ls" is formatted to support %d media families, but %d media families are expected according to the backup device specification.

3232

16

No

The volume mounted on "%ls" does not have the expected backup set identity. The volume may be obsolete due to a more recent overwrite of this media family. In that case, locate the correct volume with sequence number %d of media family %d.

3234

16

No

Logical file '%.*ls' is not part of database '%ls'. Use RESTORE FILELISTONLY to list the logical file names.

3235

16

No

The file "%.*ls" is not part of database "%ls". You can only list files that are members of this database.

3239

16

No

The backup set on device '%ls' uses a feature of the Microsoft Tape Format not supported by SQL Server.

3240

16

No

Backup to mirrored media sets requires all mirrors to append. Provide all members of the set, or reformat a new media set.

3241

16

No

The media family on device '%ls' is incorrectly formed. SQL Server cannot process this media family.

3242

16

No

The file on device '%ls' is not a valid Microsoft Tape Format backup set.

3243

16

No

The media family on device '%ls' was created using Microsoft Tape Format version %d.%d. SQL Server supports version %d.%d.

3244

16

No

Descriptor block size exceeds %d bytes. Use a shorter name and/or description string and retry the operation.

3245

16

No

Could not convert a string to or from Unicode, %ls.

3246

16

No

The media family on device '%ls' is marked as nonappendable. Reissue the statement using the INIT option to overwrite the media.

3247

16

No

The volume on device '%ls' has the wrong media sequence number (%d). Remove it and insert volume %d.

3249

16

No

The volume on device '%ls' is a continuation volume for the backup set. Remove it and insert the volume holding the start of the backup set.

3250

16

No

The value '%d' is not within range for the %ls parameter.

3251

10

No

The media family on device '%ls' is complete. The device is now being reused for one of the remaining families.

3253

16

No

The block size parameter must supply a value that is a power of 2.

3254

16

No

The volume on device '%ls' is empty.

3255

16

No

The data set on device '%ls' is a SQL Server backup set not compatible with this version of SQL Server.

3256

16

No

The backup set on device '%ls' was terminated while it was being created and is incomplete. RESTORE sequence is terminated abnormally.

3257

16

No

There is insufficient free space on disk volume '%ls' to create the database. The database requires %I64u additional free bytes, while only %I64u bytes are available.

3258

16

No

The volume on the device "%ls" is not part of the media set that is currently being processed. Ensure that the backup devices are loaded with the correct media.

3260

16

No

An internal buffer has become full.

3261

16

No

SQL Server cannot use the virtual device configuration.

3262

10

No

The backup set on file %d is valid.

3263

16

No

Cannot use the volume on device '%ls' as a continuation volume. It is sequence number %d of family %d for the current media set. Insert a new volume, or sequence number %d of family %d for the current set.

3264

16

No

The operation did not proceed far enough to allow RESTART. Reissue the statement without the RESTART qualifier.

3265

16

No

The login has insufficient authority. Membership of the sysadmin role is required to use VIRTUAL_DEVICE with BACKUP or RESTORE.

3266

16

Yes

The backup data at the end of "%ls" is incorrectly formatted. Backup sets on the media might be damaged and unusable. To determine the backup sets on the media, use RESTORE HEADERONLY. To determine the usability of the backup sets, run RESTORE VERIFYONLY. If all of the backup sets are incomplete, reformat the media using BACKUP WITH FORMAT, which destroys all the backup sets.

3267

16

No

Insufficient resources to create UMS scheduler.

3268

16

No

Cannot use the backup file '%ls' because it was originally formatted with sector size %d and is now on a device with sector size %d.

3269

16

No

Cannot restore the file '%ls' because it was originally written with sector size %d; '%ls' is now on a device with sector size %d.

3270

16

No

An internal consistency error has occurred. This error is similar to an assert. Contact technical support for assistance.

3271

16

No

A nonrecoverable I/O error occurred on file "%ls:" %ls.

3272

16

No

The '%ls' device has a hardware sector size of %d, but the block size parameter specifies an incompatible override value of %d. Reissue the statement using a compatible block size.

3276

16

No

WITH SNAPSHOT can be used only if the backup set was created WITH SNAPSHOT.

3277

16

No

WITH SNAPSHOT must be used with only one virtual device.

3278

16

No

Failed to encrypt string %ls

3279

16

No

Access is denied due to a password failure

3280

16

No

Backups on raw devices are not supported. '%ls' is a raw device.

3281

10

No

Released and initiated rewind on '%ls'.

3283

16

No

The file "%ls" failed to initialize correctly. Examine the error logs for more details.

3284

16

No

Filemark on device '%ls' is not aligned. Re-issue the Restore statement with the same blocksize used to create the backupset: '%d' looks like a possible value.

3301

21

Yes

The transaction log contains a record (logop %d) that is not valid. The log has been corrupted. Restore the database from a full backup, or repair the database.

3302

21

Yes

Redoing of logged operations in database '%.*ls' failed to reach end of log at log record ID %S_LSN. This indicates corruption around log record ID %S_LSN. Restore the database from a full backup, or repair the database.

3313

21

Yes

During redoing of a logged operation in database '%.*ls', an error occurred at log record ID %S_LSN. Typically, the specific failure is previously logged as an error in the Windows Event Log service. Restore the database from a full backup, or repair the database.

3314

21

Yes

During undoing of a logged operation in database '%.*ls', an error occurred at log record ID %S_LSN. Typically, the specific failure is logged previously as an error in the Windows Event Log service. Restore the database or file from a backup, or repair the database.

3315

21

Yes

During rollback, the following process did not hold an expected lock: process %d with mode %d at level %d for row %S_RID in database '%.*ls' under transaction %S_XID. Restore a backup of the database, or repair the database.

3316

21

Yes

During undo of a logged operation in database '%.*ls', an error occurred at log record ID %S_LSN. The row was not found. Restore the database from a full backup, or repair the database.

3401

10

Yes

Errors occurred during recovery while rolling back a transaction. The transaction was deferred. Restore the bad page or file, and re-run recovery.

3402

10

Yes

The database '%ls' is marked %ls and is in a state that does not allow recovery to be run.

3403

10

Yes

Recovering only master database because traceflag 3608 was specified. This is an informational message only. No user action is required.

3404

10

Yes

Failed to check for new installation or a renamed server at startup. The logic for this check has failed unexpectedly. Run setup again, or fix the problematic registry key.

3406

10

Yes

%d transactions rolled forward in database '%.*ls' (%d). This is an informational message only. No user action is required.

3407

10

Yes

%d transactions rolled back in database '%.*ls' (%d). This is an informational message only. No user action is required.

3408

10

Yes

Recovery is complete. This is an informational message only. No user action is required.

3409

16

Yes

Performance counter shared memory setup failed with error %d. Reinstall sqlctr.ini for this instance, and ensure that the instance login account has correct registry permissions.

3410

10

Yes

Data in filegroup %s is offline, and deferred transactions exist. Use RESTORE to recover the filegroup, or drop the filegroup if you never intend to recover it. Log truncation cannot occur until this condition is resolved.

3411

21

Yes

Configuration block version %d is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.

3412

10

Yes

Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically. After the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.

3413

21

Yes

Database ID %d. Could not mark database as suspect. Getnext NC scan on sys.databases.database_id failed. Refer to previous errors in the error log to identify the cause and correct any associated problems.

3414

10

Yes

An error occurred during recovery, preventing the database '%.*ls' (database ID %d) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.

3415

16

Yes

Database '%.*ls' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.

3416

16

Yes

The server contains read-only files that must be made writable before the server can be recollated.

3417

21

Yes

Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.

3418

10

Yes

Recovery is unable to defer error %d. Errors can only be deferred in databases using the full recovery model and an active backup log chain.

3419

16

Yes

Recovery for database '%.*ls' is being skipped because it requires an upgrade but is marked for Standby. Use RESTORE DATABASE WITH NORECOVERY to take the database back to a Restoring state and continue the restore sequence.

3420

21

Yes

Database snapshot '%ls' has failed an IO operation and is marked suspect. It must be dropped and recreated.

3421

10

Yes

Recovery completed for database %ls (database ID %d) in %I64d second(s) (analysis %I64d ms, redo %I64d ms, undo %I64d ms.) This is an informational message only. No user action is required.

3422

10

Yes

Database %ls was shutdown due to error %d in routine '%hs'. Restart for non-snapshot databases will be attempted after all connections to the database are aborted.

3429

10

Yes

Recovery could not determine the outcome of a cross-database transaction %S_XID, named '%.*ls', in database '%.*ls' (database ID %d). The coordinating database (database ID %d) was unavailable. The transaction was assumed to be committed. If the transaction was not committed, you can retry recovery when the coordinating database is available.

3431

21

Yes

Could not recover database '%.*ls' (database ID %d) because of unresolved transaction outcomes. Microsoft Distributed Transaction Coordinator (MS DTC) transactions were prepared, but MS DTC was unable to determine the resolution. To resolve, either fix MS DTC, restore from a full backup, or repair the database.

3434

20

Yes

Cannot change sort order or locale. An unexpected failure occurred while trying to reindex the server to a new collation. SQL Server is shutting down. Restart SQL Server to continue with the sort order unchanged. Diagnose and correct previous errors and then retry the operation.

3437

21

Yes

An error occurred while recovering database '%.*ls'. Unable to connect to Microsoft Distributed Transaction Coordinator (MS DTC) to check the completion status of transaction %S_XID. Fix MS DTC, and run recovery again.

3441

21

Yes

During startup of warm standby database '%.*ls' (database ID %d), its standby file ('%ls') was inaccessible to the RESTORE statement. The operating system error was '%ls'. Diagnose the operating system error, correct the problem, and retry startup.

3442

21

Yes

Recovery of warm standby database '%.*ls' (database ID %d) failed. There is insufficient room in the undo file. Increase the size of the undo file and retry recovery.

3443

21

Yes

Database '%.*ls' (database ID %d) was marked for standby or read-only use, but has been modified. The RESTORE LOG statement cannot be performed. Restore the database from a backup.

3445

21

Yes

File '%ls' is not a valid undo file for database '%.*ls (database ID %d). Verify the file path, and specify the correct file.

3446

16

No

Primary log file is not available for database '%.*ls'. The log cannot be backed up.

3447

16

No

Could not activate or scan all of the log files for database '%.*ls'.

3448

21

Yes

Rollback encountered a page with a log sequence number (LSN) less than the original log record LSN. Could not undo log record %S_LSN, for transaction ID %S_XID, on page %S_PGID, database '%.*ls' (database ID %d). Page information: LSN = %S_LSN, type = %ld. Log information: OpCode = %ld, context %ld. Restore or repair the database.

3449

21

Yes

SQL Server must shut down in order to recover a database (database ID %d). The database is either a user database that could not be shut down or a system database. Restart SQL Server. If the database fails to recover after another startup, repair or restore the database.

3450

10

Yes

Recovery of database '%.*ls' (%d) is %d%% complete (approximately %d seconds remain). Phase %d of 3. This is an informational message only. No user action is required.

3452

10

Yes

Recovery of database '%.*ls' (%d) detected possible identity value inconsistency in table ID %d. Run DBCC CHECKIDENT ('%.*ls').

3453

16

No

This version cannot redo any index creation or non-logged operation done by SQL Server 7.0. Further roll forward is not possible.

3454

10

Yes

Recovery is writing a checkpoint in database '%.*ls' (%d). This is an informational message only. No user action is required.

3456

21

Yes

Could not redo log record %S_LSN, for transaction ID %S_XID, on page %S_PGID, database '%.*ls' (database ID %d). Page: LSN = %S_LSN, type = %ld. Log: OpCode = %ld, context %ld, PrevPageLSN: %S_LSN. Restore from a backup of the database, or repair the database.

3457

21

Yes

Transactional file system resource manager '%.*ls' failed to recover. For more information, see the accompanying error message, which determines the appropriate user action.

3458

16

No

Recovery cannot scan database "%.*ls" for dropped allocation units because an unexpected error has occurred. These allocation units cannot be cleaned up.

3505

14

No

Only the owner of database "%.*ls" or someone with relevant permissions can run the CHECKPOINT statement.

3604

10

No

Duplicate key was ignored.

3606

10

No

Arithmetic overflow occurred.

3607

10

No

Division by zero occurred.

3608

16

No

Cannot allocate a GUID for the token.

3609

16

No

The transaction ended in the trigger. The batch has been aborted.

3612

10

No

%hs SQL Server Execution Times:%hs CPU time = %lu ms, elapsed time = %lu ms.

3613

10

No

SQL Server parse and compile time: %hs CPU time = %lu ms, elapsed time = %lu ms.

3615

10

No

Table '%.*ls'. Scan count %d, logical reads %d, physical reads %d, read-ahead reads %d, lob logical reads %d, lob physical reads %d, lob read-ahead reads %d.

3616

16

No

An error was raised during trigger execution. The batch has been aborted and the user transaction, if any, has been rolled back.

3619

10

Yes

Could not write a checkpoint record in database ID %d because the log is out of space. Contact the database administrator to truncate the log or allocate more space to the database log files.

3620

10

Yes

Automatic checkpointing is disabled in database '%.*ls' because the log is out of space. Automatic checkpointing will be enabled when the database owner successfully checkpoints the database. Contact the database owner to either truncate the log file or add more disk space to the log. Then retry the CHECKPOINT statement.

3621

10

No

The statement has been terminated.

3622

10

No

Warning: An invalid floating point operation occurred.

3623

16

No

An invalid floating point operation occurred.

3624

20

Yes

A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.

3625

20

Yes

'%hs' is not yet implemented.

3627

17

Yes

New parallel operation cannot be started due to too many parallel operations executing at this time. Use the "max worker threads" configuration option to increase the number of allowable threads, or reduce the number of parallel operations running on the system.

3628

24

Yes

The Database Engine received a floating point exception from the operating system while processing a user request. Try the transaction again. If the problem persists, contact your system administrator.

3633

16

Yes

The operating system returned the error '%ls' while attempting '%ls' on '%ls' at '%hs'(%d).

3634

16

Yes

The operating system returned the error '%ls' while attempting '%ls' on '%ls'.

3635

16

Yes

An error occurred while processing '%ls' metadata for database id %d, file id %d, and transaction='%.*ls'. Additional Context='%ls'. Location='%hs'(%d). Retry the operation; if the problem persists, contact the database administrator to review locking and memory configurations. Review the application for possible deadlock conflicts.

3636

16

No

An error occurred while processing '%ls' metadata for database id %d file id %d.

3637

16

No

A parallel operation cannot be started from a DAC connection.

3638

10

No

SQL text cache memory usage: %d pages. This is an informational message only; no user action is required.

3701

11

No

Cannot %S_MSG the %S_MSG '%.*ls', because it does not exist or you do not have permission.

3702

16

No

Cannot drop database "%.*ls" because it is currently in use.

3703

16

No

Cannot detach the %S_MSG '%.*ls' because it is currently in use.

3705

16

No

Cannot use DROP %ls with '%.*ls' because '%.*ls' is a %S_MSG. Use %ls.

3706

16

No

Cannot %S_MSG a database snapshot.

3707

16

No

Cannot detach a suspect or recovery pending database. It must be repaired or dropped.

3708

16

No

Cannot %S_MSG the %S_MSG '%.*ls' because it is a system %S_MSG.

3709

16

No

Cannot %S_MSG the database while the database snapshot "%.*ls" refers to it. Drop that database first.

3710

16

No

Cannot detach an opened database when the server is in minimally configured mode.

3716

16

No

The %S_MSG '%.*ls' cannot be dropped because it is bound to one or more %S_MSG.

3717

16

No

Cannot drop a default constraint by DROP DEFAULT statement. Use ALTER TABLE to drop a constraint default.

3721

16

No

Type '%.*ls' cannot be renamed because it is being referenced by object '%.*ls'.

3723

16

No

An explicit DROP INDEX is not allowed on index '%.*ls'. It is being used for %ls constraint enforcement.

3724

16

No

Cannot %S_MSG the %S_MSG '%.*ls' because it is being used for replication.

3725

16

No

The constraint '%.*ls' is being referenced by table '%.*ls', foreign key constraint '%.*ls'.

3726

16

No

Could not drop object '%.*ls' because it is referenced by a FOREIGN KEY constraint.

3727

10

No

Could not drop constraint. See previous errors.

3728

16

No

'%.*ls' is not a constraint.

3729

16

No

Cannot %ls '%.*ls' because it is being referenced by object '%.*ls'.

3730

16

No

Cannot drop the default constraint '%.*ls' while it is being used by a foreign key as SET DEFAULT referential action.

3732

16

No

Cannot drop type '%.*ls' because it is being referenced by object '%.*ls'. There may be other objects that reference this type.

3733

16

No

Constraint '%.*ls' does not belong to table '%.*ls'.

3734

16

No

Could not drop the primary key constraint '%.*ls' because the table has an XML or spatial index.

3735

16

No

The primary key constraint '%.*ls' on table '%.*ls' cannot be dropped because change tracking is enabled on the table. Change tracking requires a primary key constraint on the table. Disable change tracking before dropping the constraint.

3737

16

No

Could not delete file '%ls'. See the SQL Server error log for more information.

3738

10

No

Deleting database file '%ls'.

3739

11

No

Cannot %ls the index '%.*ls' because it is not a statistics collection.

3740

16

No

Cannot drop the %S_MSG '%.*ls' because at least part of the table resides on a read-only filegroup.

3741

16

No

Cannot drop the %S_MSG '%.*ls' because at least part of the table resides on an offline filegroup.

3743

16

No

The database '%.*ls' is enabled for database mirroring. Database mirroring must be removed before you drop the database.

3744

16

No

Only a single clause is allowed in a statement where an index is dropped online.

3745

16

No

Only a clustered index can be dropped online.

3746

16

No

Cannot drop the clustered index of view '%.*ls' because the view is being used for replication.

3747

16

No

Cannot drop a clustered index created on a view using drop clustered index clause. Clustered index '%.*ls' is created on view '%.*ls'.

3748

16

No

Cannot drop non-clustered index '%.*ls' using drop clustered index clause.

3749

16

No

Cannot drop XML Index '%.*ls' using old 'Table.Index' syntax, use 'Index ON Table' syntax instead.

3750

10

No

Warning: Index '%.*ls' on %S_MSG '%.*ls' was disabled as a result of disabling the clustered index on the %S_MSG.

3751

16

No

Cannot use SP_DROPEXTENDEDPROC or DBCC DROPEXTENDEDPROC with '%.*ls' because '%.*ls' is a %S_MSG. Use %ls.

3801

10

No

Warning: The index "%.*ls" on "%.*ls"."%.*ls" may be impacted by the collation upgrade. Run DBCC CHECKTABLE.

3802

10

No

Warning: The constraint "%.*ls" on "%.*ls"."%.*ls" may be impacted by the collation upgrade. Disable and enable WITH CHECK.

3803

10

No

Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the implementation of the checksum function has changed.

3804

10

No

Warning: The check constraint "%.*ls" on table "%.*ls"."%.*ls" is disabled because the implementation of the checksum function has changed.

3805

10

No

Warning: Index "%.*ls" on table "%.*ls"."%.*ls" might be corrupted because it references computed column "%.*ls" containing a non-deterministic conversion from string to date. Run DBCC CHECKTABLE to verify index. Consider using explicit CONVERT with deterministic date style such as 121. Computed column indexes referencing non-deterministic expressions can't be created in 90 compatibility mode. See Books Online topic "Creating Indexes on Computed Columns" for more information.

3806

10

No

Warning: Indexed view "%.*ls"."%.*ls" might be corrupted because it contains a non-deterministic conversion from string to date. Run DBCC CHECKTABLE to verify view. Consider using explicit CONVERT with deterministic date style such as 121. Indexed views referencing non-deterministic expressions can't be created in 90 compatibility mode. See Books Online topic "Creating Indexed Views" for more information.

3807

17

No

Create failed because all available identifiers have been exhausted.

3808

10

No

Warning: The index "%.*ls" on "%.*ls"."%.*ls" is disabled because the index is defined on a view with ignore_dup_key index option. Drop the index and, if possible, recreate it without ignore_dup_key option. You may need to change the logical structure of the view to ensure all rows are unique.

3809

16

No

Upgrade of database "%.*ls" failed because index "%.*ls" on object ID %d has the same name as that of another index on the same table.

3810

10

No

Event notification "%.*ls" on assembly is dropped.

3811

10

No

Event notification "%.*ls" on service queue is dropped as broker instance is not specified.

3812

10

No

Event notification "%.*ls" on object is dropped.

3813

16

No

Upgrade of login '%.*ls' failed because its name or sid is a duplicate of another login or server role.

3814

16

No

Local login mapped to remote login '%.*ls' on server '%.*ls' is invalid. Drop and recreate the remote login before upgrade.

3815

16

No

Local login mapped to linked login '%.*ls' on server '%.*ls' is invalid. Drop and recreate the linked login before upgrade.

3816

16

No

Upgrade of login '%.*ls' failed because its password hash is invalid. Update the login password before upgrade.

3817

10

No

Warning: The index "%.*ls" on "%.*ls"."%.*ls" was disabled because the implementation of geometry and geography methods have changed.

3818

16

No

CUID column of 6 bytes cannot be added to index "%.*ls" on object %.*ls because row length would exceed the maximum permissible length of %d bytes.

3819

10

No

Warning: The check constraint "%.*ls" on "%.*ls"."%.*ls" was disabled and set as not trusted because the implementation of geometry and geography methods have changed.

3820

10

No

Warning: CUID column of 6 bytes has been added to index "%.*ls" on object %.*ls, but its maximum row size exceeds the allowed maximum of %d bytes. INSERT or UPDATE to this index will fail for some combination of large values.

3821

10

No

Warning: The foreign key constraint "%.*ls" on "%.*ls"."%.*ls" was disabled because the implementation of geometry and geography methods have changed.

3822

10

No

Warning: The heap "%.*ls"."%.*ls" has persisted computed columns that depends on a geometry or geography methods and may contain out-of-date information. Because of this, DBCC may report inconsistencies on this table. The persisted computed columns depending on geometry or geography methods should be unpersisted and persisted again to refresh the data.

3823

10

No

Warning: The object "%.*ls"."%.*ls" could not be bound and was ignored during upgrade. Consider reviewing and correcting its definition.

3851

10

No

An invalid row (%ls) was found in the system table sys.%ls%ls.

3852

10

No

Row (%ls) in sys.%ls%ls does not have a matching row (%ls) in sys.%ls%ls.

3853

10

No

Attribute (%ls) of row (%ls) in sys.%ls%ls does not have a matching row (%ls) in sys.%ls%ls.

3854

10

No

Attribute (%ls) of row (%ls) in sys.%ls%ls has a matching row (%ls) in sys.%ls%ls that is invalid.

3855

10

No

Attribute (%ls) exists without a row (%ls) in sys.%ls%ls.

3856

10

No

Attribute (%ls) exists but should not for row (%ls) in sys.%ls%ls.

3857

10

No

The attribute (%ls) is required but is missing for row (%ls) in sys.%ls%ls.

3858

10

No

The attribute (%ls) of row (%ls) in sys.%ls%ls has an invalid value.

3859

10

No

Warning: The system catalog was updated directly in database ID %d, most recently at %S_DATE.

3860

10

No

Cannot upgrade database ID 32767. This ID value is reserved for SQL Server internal use.

3862

10

No

CLR type '%.*ls'.'%.*ls' is disabled because the on disk format for this CLR type has been changed. Use DROP TYPE to remove this disabled type.

3864

23

Yes

Could not find an entry for index with ID %d on object with ID %d in database with ID %d. Possible schema corruption. Run DBCC CHECKDB.

3901

16

No

The transaction name must be specified when it is used with the mark option.

3902

16

No

The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.

3903

16

No

The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION.

3904

21

No

Cannot unsplit logical page %S_PGID in object '%.*ls', in database '%.*ls'. Both pages together contain more data than will fit on one page.

3906

16

No

Failed to update database "%.*ls" because the database is read-only.

3908

16

No

Could not run BEGIN TRANSACTION in database '%.*ls' because the database is in bypass recovery mode.

3909

16

No

Session binding token is invalid.

3910

16

No

Transaction context in use by another session.

3912

16

No

Cannot bind using an XP token while the server is not in an XP call.

3913

16

Yes

TDS reset connection protocol error. Client driver requested both ResetConnectionKeepLocalXact and ResetConnectionKeepDTCXact at the same time. This is not expected in server.

3914

16

No

The data type "%s" is invalid for transaction names or savepoint names. Allowed data types are char, varchar, nchar, varchar(max), nvarchar, and nvarchar(max).

3915

16

No

Cannot use the ROLLBACK statement within an INSERT-EXEC statement.

3916

16

No

Cannot use the COMMIT statement within an INSERT-EXEC statement unless BEGIN TRANSACTION is used first.

3917

16

No

Session is bound to a transaction context that is in use. Other statements in the batch were ignored.

3918

16

No

The statement or function must be executed in the context of a user transaction.

3919

16

No

Cannot enlist in the transaction because the transaction has already been committed or rolled back.

3920

10

No

The WITH MARK option only applies to the first BEGIN TRAN WITH MARK statement. The option is ignored.

3921

16

No

Cannot get a transaction token if there is no transaction active. Reissue the statement after a transaction has been started

3922

16

No

Cannot enlist in the transaction because the transaction does not exist.

3923

10

No

Cannot use transaction marks on database '%.*ls' with bulk-logged operations that have not been backed up. The mark is ignored.

3924

10

No

The session was enlisted in an active user transaction while trying to bind to a new transaction. The session has defected from the previous user transaction.

3925

16

No

Invalid transaction mark name. The 'LSN:' prefix is reserved.

3926

10

No

The transaction active in this session has been committed or aborted by another session.

3927

10

No

The session had an active transaction when it tried to enlist in a Distributed Transaction Coordinator transaction.

3928

16

No

The marked transaction "%.*ls" failed. A timeout occurred while attempting to place a mark in the log by committing the marked transaction. This can be caused by contention with Microsoft Distributed Transaction Coordinator (MS DTC) transactions or other local marked transaction that have prepared, but not committed or aborted. Try the operation again and if the error persists, determine the source of the contention.

3929

16

No

No distributed or bound transaction is allowed in single user database.

3930

16

No

The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.

3931

16

No

The current transaction cannot be committed and cannot be rolled back to a savepoint. Roll back the entire transaction.

3932

16

No

The save point name "%.*ls" that was provided is too long. The maximum allowed length is %d characters.

3933

16

No

Cannot promote the transaction to a distributed transaction because there is an active save point in this transaction.

3934

14

No

The current user cannot use this FILESTREAM transaction context. To obtain a valid FILESTREAM transaction context, use GET_FILESTREAM_TRANSACTION_CONTEXT.

3935

16

No

A FILESTREAM transaction context could not be initialized. This might be caused by a resource shortage. Retry the operation. Error code: 0x%x.

3936

16

No

The transaction could not be committed because an error occurred while tyring to flush FILESTREAM data to disk. A file may have been open at commit time or a disk I/O error may have occurred. '%.*ls' was one of the one or more files involved. ErorrCode: 0x%x

3937

16

No

While rolling back a transaction, an error occurred while trying to deliver a rollback notification to the FILESTREAM filter driver. Error code: 0x%0x.

3938

18

No

The transaction has been stopped because it conflicted with the execution of a FILESTREAM close operation using the same transaction. The transaction will be rolled back.

3939

16

No

An uncommittable transaction was detected at the beginning of the batch. The transaction was rolled back. This was caused by an error that occurred during the processing of a FILESTREAM request in the context of this transaction.

3950

16

No

Version store scan timed out when attempting to read the next row. Please try the statement again later when the system is not as busy.

3951

16

No

Transaction failed in database '%.*ls' because the statement was run under snapshot isolation but the transaction did not start in snapshot isolation. You cannot change the isolation level of the transaction to snapshot after the transaction has started unless the transaction was originally started under snapshot isolation level.

3952

16

No

Snapshot isolation transaction failed accessing database '%.*ls' because snapshot isolation is not allowed in this database. Use ALTER DATABASE to allow snapshot isolation.

3953

16

No

Snapshot isolation transaction failed in database '%.*ls' because the database was not recovered when the current transaction was started. Retry the transaction after the database has recovered.

3954

16

No

Snapshot isolation transaction failed to start in database '%.*ls' because the ALTER DATABASE command that disallows snapshot isolation had started before this transaction began. The database is in transition to OFF state. You will either need to change the isolation level of the transaction or re-enable the snapshot isolation in the database.

3955

16

No

Snapshot isolation transaction failed in database '%.*ls' because the recovery was skipped for this database. You must recover the database before you can run a transaction under snapshot isolation.

3956

16

No

Snapshot isolation transaction failed to start in database '%.*ls' because the ALTER DATABASE command which enables snapshot isolation for this database has not finished yet. The database is in transition to pending ON state. You must wait until the ALTER DATABASE Command completes successfully.

3957

16

No

Snapshot isolation transaction failed in database '%.*ls' because the database did not allow snapshot isolation when the current transaction started. It may help to retry the transaction.

3958

16

No

Transaction aborted when accessing versioned row in table '%.*ls' in database '%.*ls'. Requested versioned row was not found. Your tempdb is probably out of space. Please refer to BOL on how to configure tempdb for versioning.

3959

10

Yes

Version store is full. New version(s) could not be added. A transaction that needs to access the version store may be rolled back. Please refer to BOL on how to configure tempdb for versioning.

3960

16

No

Snapshot isolation transaction aborted due to update conflict. You cannot use snapshot isolation to access table '%.*ls' directly or indirectly in database '%.*ls' to update, delete, or insert the row that has been modified or deleted by another transaction. Retry the transaction or change the isolation level for the update/delete statement.

3961

16

No

Snapshot isolation transaction failed in database '%.*ls' because the object accessed by the statement has been modified by a DDL statement in another concurrent transaction since the start of this transaction. It is disallowed because the metadata is not versioned. A concurrent update to metadata can lead to inconsistency if mixed with snapshot isolation.

3962

16

No

Bind to another transaction while executing SQL Server internal query is not supported. Check your logon trigger definition and remove any sp_bindsession usage if any. If this error is not happening during logon trigger execution, contact production support team.

3963

16

No

Transaction failed in database '%.*ls' because distributed transactions are not supported under snapshot isolation.

3964

16

No

Transaction failed because this DDL statement is not allowed inside a snapshot isolation transaction. Since metadata is not versioned, a metadata change can lead to inconsistency if mixed within snapshot isolation.

3965

16

No

The PROMOTE TRANSACTION request failed because there is no local transaction active.

3966

17

No

Transaction is rolled back when accessing version store. It was earlier marked as victim when the version store was shrunk due to insufficient space in tempdb. This transaction was marked as a victim earlier because it may need the row version(s) that have already been removed to make space in tempdb. Retry the transaction

3967

17

Yes

Insufficient space in tempdb to hold row versions. Need to shrink the version store to free up some space in tempdb. Transaction (id=%I64d xsn=%I64d spid=%d elapsed_time=%d) has been marked as victim and it will be rolled back if it accesses the version store. If the problem persists, the likely cause is improperly sized tempdb or long running transactions. Please refer to BOL on how to configure tempdb for versioning.

3968

10

No

Snapshot isolation or read committed snapshot is not available in database '%.*ls' because SQL Server was started with one or more undocumented trace flags that prevent enabling database for versioning. Transaction started with snapshot isolation will fail and a query running under read committed snapshot will succeed but will resort back to lock based read committed.

3969

16

No

Distributed transaction is not supported while running SQL Server internal query. Check your logon trigger definition and remove any distributed transaction usage if any. If this error is not happening during logon trigger execution, contact production support team.

3970

16

No

This operation conflicts with another pending operation on this transaction. The operation failed.

3971

16

No

The server failed to resume the transaction. Desc:%I64x.

3972

20

Yes

Incoming Tabular Data Stream (TDS) protocol is incorrect. Transaction Manager event has wrong length. Event type: %d. Expected length: %d. Actual length: %d.

3973

16

No

The database is currently being used by another thread under the same workspace in exclusive mode. The operation failed.

3974

16

No

The number of databases in exclusive mode usage under a workspace is limited. Because the limit has been exceeded, the operation failed.

3975

16

No

The varchar(max) data type is not supported for sp_getbindtoken. The batch has been aborted.

3976

16

No

The transaction name has the odd length %d. The batch has been aborted.

3977

16

No

The savepoint name cannot be NULL. The batch has been aborted.

3978

16

No

Beginning a new transaction after rollback to save point is not allowed.

3979

16

No

The TM request is longer than expected. The request is not processed.

3980

16

No

The request failed to run because the batch is aborted, this can be caused by abort signal sent from client, or another request is running in the same session, which makes the session busy.

3981

16

No

The transaction operation cannot be performed because there are pending requests working on this transaction.

3982

16

No

New transaction is not allowed to be started while DTC or bound transaction is active.

3983

16

No

The operation failed because the session is not single threaded.

3984

16

No

Cannot acquire a database lock during a transaction change.

3985

16

No

An error occurred during the changing of transaction context. This is usually caused by low memory in the system. Try to free up more memory.

3986

19

No

The transaction timestamps ran out. Restart the server.

3987

10

No

SNAPSHOT ISOLATION is always enabled in this database.

3988

16

No

New transaction is not allowed because there are other threads running in the session.

3989

16

No

New request is not allowed to start because it should come with valid transaction descriptor.

3990

16

No

Transaction is not allowed to commit inside of a user defined routine, trigger or aggregate because the transaction is not started in that CLR level. Change application logic to enforce strict transaction nesting.

3991

16

No

The context transaction which was active before entering user defined routine, trigger or aggregate "%.*ls" has been ended inside of it, which is not allowed. Change application logic to enforce strict transaction nesting.

3992

16

No

Transaction count has been changed from %d to %d inside of user defined routine, trigger or aggregate "%.*ls". This is not allowed and user transaction will be rolled back. Change application logic to enforce strict transaction nesting.

3993

16

No

The user transaction that has been started in user defined routine, trigger or aggregate "%.*ls" is not ended upon exiting from it. This is not allowed and the transaction will be rolled back. Change application logic to enforce strict transaction nesting.

3994

16

No

User defined routine, trigger or aggregate tried to rollback a transaction that is not started in that CLR level. An exception will be thrown to prevent execution of rest of the user defined routine, trigger or aggregate.

3995

16

No

Unknown transaction isolation level %d, valid value range is 0 to 5.

3996

16

No

Snapshot isolation level is not supported for distributed transaction. Use another isolation level or do not use distributed transaction.

3997

16

No

A transaction that was started in a MARS batch is still active at the end of the batch. The transaction is rolled back.

3998

16

No

Uncommittable transaction is detected at the end of the batch. The transaction is rolled back.

3999

17

Yes

Failed to flush the commit table to disk in dbid %d due to error %d. Check the errorlog for more information.