Skip to main content
Time

Published: April 17, 2012

Updated: April 17, 2012

Applies To: Windows 7, Windows 8, Windows Server 2000, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows XP

Displays or sets the system time. If used without parameters, time displays the current system time and prompts you to enter a new time.

For examples of how to use this command, see Examples.

Syntax
time [/t | [<HH>[:<MM>[:<SS>]] [am|pm]]]
Parameters

 

Parameter Description

<HH>[:<MM>[:<SS>[.<NN>]]] [am|pm]

Sets the system time to the new time specified, where HH is in hours (required), MM is in minutes, and SS is in seconds. NN can be used to specify hundredths of a second. If am or pm is not specified, time uses the 24-hour format by default.

/t

Displays the current time without prompting you for a new time.

/?

Displays help at the command prompt.

Remarks
  • To change the current time, you must have administrative credentials.

  • You must separate values for HH, MM, and SS with colons (:). SS and NN must be separated with a period (.).

  • Valid HH values are 0 through 24.

  • Valid MM and SS values are 0 through 59.

Examples

If command extensions are enabled, to display the current system time, type:

time /t

To change the current system time to 5:30 P.M., type either of the following:

time 17:30:00
time 5:30 pm

To display the current system time, followed by a prompt to enter a new time, type:

The current time is: 17:33:31.35
Enter the new time:

To keep the current time and return to the command prompt, press ENTER. To change the current time, type the new time and then press ENTER.