Export (0) Print
Expand All

Add Mailbox and Client Access servers to a SIP URI dial plan

 

Applies to: Exchange Server 2013

Topic Last Modified: 2013-04-16

You can add Client Access and Mailbox servers to SIP URI dial plans. Client Access and Mailbox servers can’t be associated with Telephone Extension or E.164 dial plans, but the servers will answer all incoming calls.

If you’re deploying Microsoft Lync Server, to enable outbound calling to work correctly, you must manually add all Client Access and Mailbox servers to all SIP URI dial plans that you’ve created for Lync Server.

For additional management tasks related to UM dial plans, see UM dial plan procedures.

  • Estimated time to complete: Less than 1 minute.

  • You need to be assigned permissions before you can perform this procedure or procedures. To see what permissions you need, see the "UM dial plans" entry in the Unified Messaging permissions topic.

  • Before you perform these procedures, confirm that a SIP URI dial plan has been created. For detailed steps, see Create a UM dial plan.

  • For information about keyboard shortcuts that may apply to the procedures in this topic, see Keyboard shortcuts in the Exchange admin center.

TipTip:
Having problems? Ask for help in the Exchange forums. Visit the forums at: Exchange Server, Exchange Online, or Exchange Online Protection..

  1. In the EAC, navigate to Servers > Servers.

  2. In the list view, select the Mailbox server you want to modify, and then click Edit Edit icon.

  3. On the Exchange Server page, click Unified Messaging.

  4. Under UM Service settings > Associated dial plans, click Add Add Icon.

  5. In the Select a UM Dial Plan window, select the SIP URI dial plan, click Add, click OK, and then click Save.

This example adds the Mailbox server named MyMailboxServer to a SIP URI dial plan named MySIPDialPlan and prevents it from accepting new calls. It also sets the startup mode to Dual mode, which enables the Mailbox server to accept TCP and TLS requests.

Set-UMService -Identity MyMailboxServer -DialPlans MySIPDialPlan -Status Disabled -UMStartupMode Dual

This example adds the Mailbox server named MyMailboxServer to two SIP dial plans, named MySIPDialPlan and MySIPDialPlan2, and sets the following:

  • Allows both IPv4 and IPv6 addresses.

  • Sets the maximum number of incoming calls to 50.

  • Configures the SIP access service for Lync Server.

Set-UMService -Identity MyMailboxServer -DialPlans MySIPDialPlan, MySIPDialPlan2 -IPAddressFamily Any -MaxCallsAllowed 50 -SipAccessService northamerica.lyncpoolna.contoso.com

  1. In the EAC, navigate to Servers > Servers.

  2. In the list view, select the Client Access server you want to modify, and then click Edit Edit icon.

  3. On the Exchange Server page, click Unified Messaging.

  4. Under UM Call Router settings > Associated dial plans, click Add Add Icon.

  5. In the Select a UM Dial Plan window, select the SIP URI dial plan, click Add, click OK, and then click Save.

This example adds the Client Access server named MyClientAccessServer to a SIP URI dial plan named MySIPDialPlan. It also sets the startup mode to Dual mode, which enables the Client Access server to accept TCP and TLS requests.

Set-UMCallRouterSettings -DialPlans MySIPDialPlan -Server MyClientAccessServer -UMStartupMode Dual

This example adds the Client Access server named MyClientAccessServer to two SIP dial plans, named MySIPDialPlan and MySIPDialPlan2, and allows the server to use both IPv4 and IPv6 addresses.

Set-UMCallRouterSettings -DialPlans MySIPDialPlan, MySIPDialPlan2 -IPAddressFamily Any -Server MyClientAccessServer
 
Was this page helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft