Exchange Server 2003

Hi,

Actually I have installed MS exchange server 2003 in a Server on Windows 2003 server. All are working fine. My server ip address is 192.168.0.1 and FQDN name is kolkata.mukherjee.com. When I want to use out look web access from http I am typing http://192.168.0.1/exchange or http://kolkata.mukherjee.com/exchange but I don,t want to use this procedeor. I want to use only http://mail.mukherjee.com instead of http://192.168.0.1/exchange. How is it prossible. Please help me regarding this issue. How can I configure this option from Exchange server. Another my AD server and Exchange server is same.

[tfl - 04 07 2010] Hi - and thanks for your post. You should post questions like this to the MSDN Forums at http://forums.microsoft.com/msdn or the MSDN Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quicker response using the forums than through the Community Content. For specific help about:
Visual Studio  : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.vstudio%2C&
SQL Server     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
.NET Framework : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.dotnet.framework
PowerShell     : http://groups.google.com/group/microsoft.public.windows.powershell/topics?pli=1
All Public     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

I have a 2003 microsoft exchange server at work. we run Microsoft Office/Outlook for email. I put in the server iinformation to sync my iphone. Can I do the same for my home computer?

I put in the server information in outlook, and my user name, but I get a message that the microsoft exchange server is unavailable. Outlook must be online or connected to complete this action.

any help you can give me is greatly appreciated

I have access, along with a few other people in my team, to an Outlook mail box called "Mailbox - Timed Reports (Australia)"

When using the 'Advanced Find' function to search this Mailbox for either a word in the subject or email address etc it is not allowing this to happen and gives the following error message.

"There are too many Find Public Folders dialogs open. You must close them to use the Advanced Find. Do you want to close them now?"

We have migrated all of our users over to an Exchange 2010 environment, but kept a 2003 server around for legacy restores. Today I received a couple of requests to restore emails from the old 2003 environment. I have recovered the database, and see the information that I am looking for, but I am unable to pull the information from the Recovery Storage Group. I keep getting an error when using ExMerge pointing to the fact that the user is no longer on the mailbox database where the backup was taken from. Is there a way to pull the user's mailbox from the RSG database to a PST without have to either move the user back to the old server or use ExMerge?

Hello,

Please help me to clarify that my company's setup is having Message labs (first layer of security) for anti virus and anti spam filtring and for content filtering we have Unix server (clearswift) in DMZ.

We are about to decommission the clearswift servers and have to place a server which forwards incomming mail from message labs to Frontend servers in site, please advice that shall we place Exchange server in DMZ or else what is the alternate server (native Microsoft) need to be placed in DMZ, please advice.

Thank you
Shafi.H

My company just signed up with a new ISP and I have little experience with MS Exchange. We have 2 static IP addresses (old and new) but when I input the new static IP information into the router/firewall we gain the internet access portion but the company is unable to receive outside emails, internally they are fine. I have checked all Exchange properties and am still falling short. Could I be not configuring something right or possibly missing something altogether? Any help would be greatly appreciated. $0 $0 Thank you,$0 $0 I have i the same issue kindly some suggest some help. $0 $0 Cheers,$0 Vishnu$0 $0

Recently we installed a new server with SBS 2011 . Our old server ran the SBS 2003 system

Without reconnecting the old server to the network, how can I extract user contacts folders from the old server

Thanks

Please help, i am having this problem
''The action cannot be completed.The connection to microsoft exchange is unavailable.outlook must be online or connected to complete this action''

i am using outlook 2007 and the email server is Exchange 2003.

Hi, sbs 2003 automatically dismounts Mailbox Store!!!
All exchange services are running
I am a newbie when it comes to exchange!
Does anyone can help me please?

you might have to do a off line defrag if so use following link to show how to http://technet.microsoft.com/en-us/library/aa995748(EXCHG.65).aspx
or
you have reached max data base size of 16gb to increase data base size use following to show you how to http://technet.microsoft.com/en-us/library/aa998066.aspx (please make sure you take note of error comment at bottom of page) please make sure you have installed exchange server 2003 SP2 you can get at following link http://www.microsoft.com/downloads/details.aspx?familyid=535BEF85-3096-45F8-AA43-60F1F58B3C40&displaylang=en

cheers malcolm

[tfl - 05 01 09] You should post questions like this to the Technet Forums at http://forums.microsoft.com/technet or the MS Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quick response using the forums than through the Community Content.
For specific help about:
Exchange : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.exchange%2C&
SQL Server : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
Windows : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows%2C&
Windows Server : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows.server%2C&
Virtual Server : http://groups.google.com/group/microsoft.public.virtualserver/topics?lnk
Full Public : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

Hi,
I have an issue where a calendar event may have been deleted. What I need to find out is if there is a way to
a) be able to tell when a calendar event was created and
b) find a way to retrieve a possible deleted event.
Thank you

[tfl - 27 11 09] Hi - and thanks for your post. You should post questions like this to the MSDN Forums at http://forums.microsoft.com/msdn or the MSDN Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quicker response using the forums than through the Community Content. For specific help about:
Visual Studio  : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.vstudio%2C&
SQL Server     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
.NET Framework : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.dotnet.framework
PowerShell     : http://groups.google.com/group/microsoft.public.windows.powershell/topics?pli=1
All Public     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

Hi,
Have same problem but i ceated calendar name Persona folder calendar now I can't delete it

Common Scenario: $0A user is required to change their AD password. The user changes the password on a pc but does not change the mail synchronized smart phone password. 12 or more hours later, the smartphone stops synchronizing due to authentication failure. An update of the password on the smartphone resolves the issue. HOWEVER, in the period of time between the password change in AD and the Smartphone authentication failure, mail is sent and received.$0 $0$0 $0 $0Less Pleasant Scenario:$0 $0A user is terminated, AD account is disabled, Password is reset. Hours later reports come in about an ex-employee contacting customers via e-mail from their mail synchronized smart phone!$0 $0$0 $0 $0$0 $0 $0I have read about this issue in a few places, but never a solid understanding of why the behavior exists or what can be done server side to reliably break an Outlook Mobile Access connection. We will be upgrading to 2010 in the next 12 months, but I will likely have terminations in the mean time.$0 $0$0 $0 $0Thanks!$0

I have exchange 2003 server, set up as a back end server and a exchange 2003 server set up as a front end server. The Problem is the certificate error page is displayed after opening an initial email message. This page has already been displayed once upon the initial opening of OWA

I go to Server Manager - Users - Exchange Advanced tab and then Mailbox Rights. I scroll down and "Users" have Full Mailbox Access. The checkmark is greyed out and if i hit advanced, it tells me I can't change it and I can't, as "This permission is inherited from the parent object". I really want to uncheck this box, but I don't know what the parent object is.

Help?

Ok I don't know if this is the right place to submit this question but I need help. I created a new distribution group on ACtive Directory USers and Computers and I also updated the old Distribution groups however when I go to my client and open outlook I can't see the new group and the existing group is not updated? Any help would be appreciated.

Hello -

I have e-mails from users leaving our company redirected to a account we created.
This account then replies to the original sender stating, "Use is no longer with company ... blah, blah, blah"
In the body of the e-mail is the user who left old e-mail's information so should the e-mail be sent in a broadcast from the higher ups or in a company wide e-mail the sender knows to remove that user from their distribution list.

My question and showing of limited knowledge in this arena is how do I trigger this VBA module once it recieved by the account from the user who left the company?

Example: User A leaves

User B sends a msg to User A

User C (is set up for all replies to be redirected to by users who have left the
company).

User C would then send to User B a msg that User A no longer is with the company.

The body of the msg is set in a script, as a OOF msg does not have the ability to capture the User A e-mail address once it is sent or redirected to User C for properly to replying to User B.

Any assistance on this is needed as soon as possible and as quickly as possible.

[tfl - 04 07 2010] Hi - and thanks for your post. You should post questions like this to the MSDN Forums at http://forums.microsoft.com/msdn or the MSDN Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quicker response using the forums than through the Community Content. For specific help about:
Visual Studio  : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.vstudio%2C&
SQL Server     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
.NET Framework : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.dotnet.framework
PowerShell     : http://groups.google.com/group/microsoft.public.windows.powershell/topics?pli=1
All Public     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

I formerly used this tool which was available for Exchange 5.5 on that as well as 2000, and an older installation of 2003, but now, on a new project, I can't get it to connect. The error syys it can't find an Exchange installation, and I've tried it on a variely of in and out of subnet environments. Any ideas or alternatives?

[tfl - 04 07 2010] Hi - and thanks for your post. You should post questions like this to the MSDN Forums at http://forums.microsoft.com/msdn or the MSDN Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quicker response using the forums than through the Community Content. For specific help about:
Visual Studio  : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.vstudio%2C&
SQL Server     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
.NET Framework : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.dotnet.framework
PowerShell     : http://groups.google.com/group/microsoft.public.windows.powershell/topics?pli=1
All Public     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

I need some help. We are forwarding about 20 users email to a public folder and it works great. No complaint there. However, when the original sender used a cc to another one of our users, several copies of the same email show up in the public folder.
Is tehre a way to only forward the message once, even if a cc is used?

Many Thanks

frank

I work with Exchange Server 2003 SP2 in a local government setting (our emails are user@post.ci.portsmouth.oh.us) and our police department (using user@portsmouthohiopolice.com) refuse to send email to each other.

I use a CISCO 5500 firewall and they use a Watchguard x700.

I use Windows Server 2003 with Active Directory and they use Small Business Server 2003.

We only have this problem with each other.

We have both had network consultants look at the issue and all we can get is that it might be a DNS issue or since nothing has been found to be wrong on either network, that it must be the other network's fault.

I really need to resolve this because the mayor is blaming me since the police department has told her that it must my network that is blocking all of the email.

PLEASE HELP!!!


Mike

Hi,

Good afternoon everyone,

I have an strange issue that I need help in. Last my company started experiencing blockage of emails on our mail server. We have looked at everything from external causes to malfunctioning settings and configurations and have not come up with anything solid. Here is the problem...

• Can send internally okay.
• Can receive externally okay.
• Cannot send externally with out getting a postmaster delay message a few moments later.

We are going to try and use TrendMicro to scan individual email accounts to see if there is anything that Antigen is not catching. We are also ensuring all computers and servers are running the latest service pack and security patches. As of today, we have yet to be added to any blacklists, but fear it might be going to that soon.

Has anyone run into this issue. If so, how did you resolve it?

Hi all,

We are running Exchange Server 2003 and have recently purchased 4 blackberry phones, we are unable to configure them to receive emails via our Exchange Server. I know that there are options to purchase software from Blackberry, but our mobile phone provider seems to think that this is uneccessary as they have the same type of Exchange Server that we have and they can configure their phones without any issues.

I was advised to check with our broadband provider (BT) by Blackberry to esnure that mail relay permissions were setup, I have done this and they were already set up. I have also heard that Exchange has its own DirectPush for emails, would this be the solution?

Any help would be appreciated.

We have a strange problem. Attachments convert into Winmail.dat between two outlook users in same organization using Exchange 2003 Service Pack2.

This is also happening when an email is sent to a distribution list. Some members get the attachment without any issue while rest get Winmail.dat as attachment. Sender is sending using HTML format and recipients being internal and oulook clients can receive Rich text Format.

[tfl - 27 11 09] Hi - and thanks for your post. You should post questions like this to the MSDN Forums at http://forums.microsoft.com/msdn or the MSDN Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quicker response using the forums than through the Community Content. For specific help about:
Visual Studio  : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.vstudio%2C&
SQL Server     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
.NET Framework : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.dotnet.framework
PowerShell     : http://groups.google.com/group/microsoft.public.windows.powershell/topics?pli=1
All Public     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

I have exchange 2003 sp2. I have 4 servers and a OWA server in DMZ. I just added a 5th server and anyone that is on the 5th server can not access email using OWA. When you type in username and password you get back the message You could not be logged on to Outlook Web Access. Make sure your domain\user name and password are correct, and then try again. The owa server is not connecting to the new server.

[tfl - 27 11 09] Hi - and thanks for your post. You should post questions like this to the MSDN Forums at http://forums.microsoft.com/msdn or the MSDN Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quicker response using the forums than through the Community Content. For specific help about:
Visual Studio  : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.vstudio%2C&
SQL Server     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
.NET Framework : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.dotnet.framework
PowerShell     : http://groups.google.com/group/microsoft.public.windows.powershell/topics?pli=1
All Public     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

To set a single mailbox limit use Active Directory Users and Computers -> select user -> Properties -> Exchange General Tab -> select the Storage Limits button and adjust the properties.

when we create user in AD for 1st time, once they login and launch outlook it ask them to put the excahnge details. is there a tool or way of avoiding this, as once they login launch outlook it directly put exchange details

Thanks for your help

rahhali

[tfl - 13 01 09] You should post questions like this to the Technet Forums at http://forums.microsoft.com/technet or the MS Newsgroups at   http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quick response using the forums than through the Community Content.

For specific help about:
Exchange       : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.exchange%2C&
SQL Server     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
Windows        : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows%2C&
Windows Server : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows.server%2C&
Virtual Server : http://groups.google.com/group/microsoft.public.virtualserver/topics?lnk
Full Public    : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

[out of date tech support query removed]

Hi all

I have a interesting issue that has me a bit stumped at the moment and was wondering if anyone can help.
We currently have an active user on our exchange 2003 server with a active mailbox which is working fine, now i have been asked to recover his mailbox from about a month ago, which is all possible with the RSG and i have dumped the database onto a server from tapes fine, the issue is that hr do not want this user to know nor do they want to merge the mailboxes together, in essence attaching it to a new account and accessing and I was wondering if this is possible as all the security info is still active and how will this affect the user account and the best way around it ?

Thanks for any help on this issue.

[tfl - 06 10 09] Hi - and thanks for your post.You should post questions like this to the Technet Forums at http://forums.microsoft.com/technet or the MS Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quick response using the forums than through the Community Content. For specific help about:
Exchange : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.exchange%2C&
SQL Server : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
Windows : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows%2C&
Windows Server : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows.server%2C&
Virtual Server : http://groups.google.com/group/microsoft.public.virtualserver/topics?lnk
Full Public : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

when i try to sync up my alias in outlook address book it's giving me the error like outlook can't find, though i am able to access my mails. If someone search my email alias in outlook GAL they will not get my corporate address book details. Please help me to get it resolved......Thanks in advance

[tfl - 06 10 09] Hi - and thanks for your post.You should post questions like this to the Technet Forums at http://forums.microsoft.com/technet or the MS Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quick response using the forums than through the Community Content. For specific help about:
Exchange : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.exchange%2C&
SQL Server : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
Windows : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows%2C&
Windows Server : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows.server%2C&
Virtual Server : http://groups.google.com/group/microsoft.public.virtualserver/topics?lnk
Full Public : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

Hi everyone

I'm using exchange 2003, I having trouble accessing the e-mails via the OWA, and e-mails from other servers are not getting through, but it is send them out.

please help

[tfl - 06 10 09] Hi - and thanks for your post.You should post questions like this to the Technet Forums at http://forums.microsoft.com/technet or the MS Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quick response using the forums than through the Community Content. For specific help about:
Exchange : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.exchange%2C&
SQL Server : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
Windows : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows%2C&
Windows Server : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows.server%2C&
Virtual Server : http://groups.google.com/group/microsoft.public.virtualserver/topics?lnk
Full Public : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

I have one exchange Mail server ip address of this server is (192.168.0.1). And Server name is server.howrah.com .When I am using my webmail from IE then type http://192.168.0.1/exchange but i dont want to use this type address. I want that I will open the ie and type the url only http://mail.howrah.com. Please help me how it is possiable????

[tfl - 14 06 09] Hi - and thanks for your post.You should post questions like this to the Technet Forums at http://forums.microsoft.com/technet or the MS Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/.  You are much more likely get a quick response using the forums than through the Community Content. For specific help about:
Exchange       :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.exchange%2C&
SQL Server     :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
Windows        :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows%2C&
Windows Server :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows.server%2C&
Virtual Server :  http://groups.google.com/group/microsoft.public.virtualserver/topics?lnk
Full Public    :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

  
[tfl - 14 06 09] Hi - and thanks for your post.You should post questions like this to the Technet Forums at http://forums.microsoft.com/technet or the MS Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/.  You are much more likely get a quick response using the forums than through the Community Content. For specific help about:
Exchange       :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.exchange%2C&
SQL Server     :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
Windows        :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows%2C&
Windows Server :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows.server%2C&
Virtual Server :  http://groups.google.com/group/microsoft.public.virtualserver/topics?lnk
Full Public    :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

I want to know if it is posible to track an email sent internally back to a specific workstation ip address. For example a user has outlook 2007 setup on their pc but logged into the OWA client from another computer in the district. I would like to find out what pc that email was sent from. Thanks,Brian

[tfl - 21 04 09] You should post questions like this to the Technet Forums at http://forums.microsoft.com/technet or the MS Newsgroups at http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quick response using the forums than through the Community Content.
For specific help about:
Exchange       :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.exchange%2C&
SQL Server     :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
Windows        :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows%2C&
Windows Server :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows.server%2C&
Virtual Server :  http://groups.google.com/group/microsoft.public.virtualserver/topics?lnk
Full Public    :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

I have a user who passed away. I don't want to delete his mail, but want anyone who sends him mail to get an undeliverable message. How do I do this?

[tfl - 13 04 09] You should post questions like this to the Technet Forums at http://forums.microsoft.com/technet or the MS Newsgroups at 

  http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quick response using the forums than through the Community Content.
For specific help about:
Exchange       :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.exchange%2C&
SQL Server     :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
Windows        :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows%2C&
Windows Server :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows.server%2C&
Virtual Server :  http://groups.google.com/group/microsoft.public.virtualserver/topics?lnk
Full Public    :  http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&

Hi i am working as a It admin. Now i need an urgent solution. Im using Exchange 2003. i have around 50 outlook users. i need a centralised calendar for all. and also a centralised contacts. If a user adds something to his calendar or contacts it should be automatically updated to the centralised calendar and contacts, is there any way to do this....

[tfl - 13 01 09] You should post questions like this to the Technet Forums at http://forums.microsoft.com/technet or the MS Newsgroups at   http://www.microsoft.com/communities/newsgroups/en-us/. You are much more likely get a quick response using the forums than through the Community Content.

For specific help about:
Exchange       : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.exchange%2C&
SQL Server     : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.sqlserver%2C&
Windows        : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows%2C&
Windows Server : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public.windows.server%2C&
Virtual Server : http://groups.google.com/group/microsoft.public.virtualserver/topics?lnk
Full Public    : http://groups.google.com/groups/dir?sel=usenet%3Dmicrosoft.public%2C&