Export (0) Print
Expand All
Expand Minimize

Set-TransportServer

 

Applies to: Exchange Server 2013

Topic Last Modified: 2014-07-18

This cmdlet is available only in on-premises Exchange Server 2013.

Use the Set-TransportServer cmdlet to set the transport configuration options for the Transport service on Mailbox servers or for Edge Transport servers.

Set-TransportServer -Identity <ServerIdParameter> [-ActiveUserStatisticsLogMaxAge <EnhancedTimeSpan>] [-ActiveUserStatisticsLogMaxDirectorySize <ByteQuantifiedSize>] [-ActiveUserStatisticsLogMaxFileSize <ByteQuantifiedSize>] [-ActiveUserStatisticsLogPath <LocalLongFullPath>] [-AgentLogEnabled <$true | $false>] [-AgentLogMaxAge <EnhancedTimeSpan>] [-AgentLogMaxDirectorySize <Unlimited>] [-AgentLogMaxFileSize <Unlimited>] [-AgentLogPath <LocalLongFullPath>] [-AntispamAgentsEnabled <$true | $false>] [-Confirm [<SwitchParameter>]] [-ConnectivityLogEnabled <$true | $false>] [-ConnectivityLogMaxAge <EnhancedTimeSpan>] [-ConnectivityLogMaxDirectorySize <Unlimited>] [-ConnectivityLogMaxFileSize <Unlimited>] [-ConnectivityLogPath <LocalLongFullPath>] [-ContentConversionTracingEnabled <$true | $false>] [-DelayNotificationTimeout <EnhancedTimeSpan>] [-DeltaSyncClientCertificateThumbprint <String>] [-DnsLogEnabled <$true | $false>] [-DnsLogMaxAge <EnhancedTimeSpan>] [-DnsLogMaxDirectorySize <Unlimited>] [-DnsLogMaxFileSize <Unlimited>] [-DnsLogPath <LocalLongFullPath>] [-DomainController <Fqdn>] [-ExternalDNSAdapterEnabled <$true | $false>] [-ExternalDNSAdapterGuid <Guid>] [-ExternalDNSProtocolOption <Any | UseUdpOnly | UseTcpOnly>] [-ExternalDNSServers <MultiValuedProperty>] [-ExternalIPAddress <IPAddress>] [-FlowControlLogEnabled <$true | $false>] [-FlowControlLogMaxAge <EnhancedTimeSpan>] [-FlowControlLogMaxDirectorySize <Unlimited>] [-FlowControlLogMaxFileSize <Unlimited>] [-FlowControlLogPath <LocalLongFullPath>] [-HttpProtocolLogEnabled <$true | $false>] [-HttpProtocolLogFilePath <LocalLongFullPath>] [-HttpProtocolLogLoggingLevel <None | Verbose>] [-HttpProtocolLogMaxAge <EnhancedTimeSpan>] [-HttpProtocolLogMaxDirectorySize <ByteQuantifiedSize>] [-HttpProtocolLogMaxFileSize <ByteQuantifiedSize>] [-HttpTransportSyncProxyServer <String>] [-InternalDNSAdapterEnabled <$true | $false>] [-InternalDNSAdapterGuid <Guid>] [-InternalDNSProtocolOption <Any | UseUdpOnly | UseTcpOnly>] [-InternalDNSServers <MultiValuedProperty>] [-IntraOrgConnectorProtocolLoggingLevel <None | Verbose>] [-IntraOrgConnectorSmtpMaxMessagesPerConnection <Int32>] [-IrmLogEnabled <$true | $false>] [-IrmLogMaxAge <EnhancedTimeSpan>] [-IrmLogMaxDirectorySize <Unlimited>] [-IrmLogMaxFileSize <ByteQuantifiedSize>] [-IrmLogPath <LocalLongFullPath>] [-JournalLogEnabled <$true | $false>] [-JournalLogMaxAge <EnhancedTimeSpan>] [-JournalLogMaxDirectorySize <Unlimited>] [-JournalLogMaxFileSize <Unlimited>] [-JournalLogPath <LocalLongFullPath>] [-MaxActiveTransportSyncJobsPerProcessor <Int32>] [-MaxConcurrentMailboxDeliveries <Int32>] [-MaxConcurrentMailboxSubmissions <Int32>] [-MaxConnectionRatePerMinute <Int32>] [-MaxNumberOfTransportSyncAttempts <Int32>] [-MaxOutboundConnections <Unlimited>] [-MaxPerDomainOutboundConnections <Unlimited>] [-MessageExpirationTimeout <EnhancedTimeSpan>] [-MessageRetryInterval <EnhancedTimeSpan>] [-MessageTrackingLogEnabled <$true | $false>] [-MessageTrackingLogMaxAge <EnhancedTimeSpan>] [-MessageTrackingLogMaxDirectorySize <Unlimited>] [-MessageTrackingLogMaxFileSize <ByteQuantifiedSize>] [-MessageTrackingLogPath <LocalLongFullPath>] [-MessageTrackingLogSubjectLoggingEnabled <$true | $false>] [-OutboundConnectionFailureRetryInterval <EnhancedTimeSpan>] [-PickupDirectoryMaxHeaderSize <ByteQuantifiedSize>] [-PickupDirectoryMaxMessagesPerMinute <Int32>] [-PickupDirectoryMaxRecipientsPerMessage <Int32>] [-PickupDirectoryPath <LocalLongFullPath>] [-PipelineTracingEnabled <$true | $false>] [-PipelineTracingPath <LocalLongFullPath>] [-PipelineTracingSenderAddress <SmtpAddress>] [-PoisonMessageDetectionEnabled <$true | $false>] [-PoisonThreshold <Int32>] [-ProcessingSchedulerLogEnabled <$true | $false>] [-ProcessingSchedulerLogMaxAge <EnhancedTimeSpan>] [-ProcessingSchedulerLogMaxDirectorySize <Unlimited>] [-ProcessingSchedulerLogMaxFileSize <Unlimited>] [-ProcessingSchedulerLogPath <LocalLongFullPath>] [-QueueLogMaxAge <EnhancedTimeSpan>] [-QueueLogMaxDirectorySize <Unlimited>] [-QueueLogMaxFileSize <Unlimited>] [-QueueLogPath <LocalLongFullPath>] [-QueueMaxIdleTime <EnhancedTimeSpan>] [-ReceiveProtocolLogMaxAge <EnhancedTimeSpan>] [-ReceiveProtocolLogMaxDirectorySize <Unlimited>] [-ReceiveProtocolLogMaxFileSize <Unlimited>] [-ReceiveProtocolLogPath <LocalLongFullPath>] [-RecipientValidationCacheEnabled <$true | $false>] [-ReplayDirectoryPath <LocalLongFullPath>] [-ResourceLogEnabled <$true | $false>] [-ResourceLogMaxAge <EnhancedTimeSpan>] [-ResourceLogMaxDirectorySize <Unlimited>] [-ResourceLogMaxFileSize <Unlimited>] [-ResourceLogPath <LocalLongFullPath>] [-RootDropDirectoryPath <String>] [-RoutingTableLogMaxAge <EnhancedTimeSpan>] [-RoutingTableLogMaxDirectorySize <Unlimited>] [-RoutingTableLogPath <LocalLongFullPath>] [-SendProtocolLogMaxAge <EnhancedTimeSpan>] [-SendProtocolLogMaxDirectorySize <Unlimited>] [-SendProtocolLogMaxFileSize <Unlimited>] [-SendProtocolLogPath <LocalLongFullPath>] [-ServerStatisticsLogMaxAge <EnhancedTimeSpan>] [-ServerStatisticsLogMaxDirectorySize <ByteQuantifiedSize>] [-ServerStatisticsLogMaxFileSize <ByteQuantifiedSize>] [-ServerStatisticsLogPath <LocalLongFullPath>] [-SmtpEnableAllTlsVersions <$true | $false>] [-TransientFailureRetryCount <Int32>] [-TransientFailureRetryInterval <EnhancedTimeSpan>] [-TransportMaintenanceLogEnabled <$true | $false>] [-TransportMaintenanceLogMaxAge <EnhancedTimeSpan>] [-TransportMaintenanceLogMaxDirectorySize <Unlimited>] [-TransportMaintenanceLogMaxFileSize <Unlimited>] [-TransportMaintenanceLogPath <LocalLongFullPath>] [-TransportSyncAccountsPoisonAccountThreshold <Int32>] [-TransportSyncAccountsPoisonDetectionEnabled <$true | $false>] [-TransportSyncAccountsPoisonItemThreshold <Int32>] [-TransportSyncAccountsSuccessivePoisonItemThreshold <Int32>] [-TransportSyncEnabled <$true | $false>] [-TransportSyncExchangeEnabled <$true | $false>] [-TransportSyncFacebookEnabled <$true | $false>] [-TransportSyncHubHealthLogEnabled <$true | $false>] [-TransportSyncHubHealthLogFilePath <LocalLongFullPath>] [-TransportSyncHubHealthLogMaxAge <EnhancedTimeSpan>] [-TransportSyncHubHealthLogMaxDirectorySize <ByteQuantifiedSize>] [-TransportSyncHubHealthLogMaxFileSize <ByteQuantifiedSize>] [-TransportSyncImapEnabled <$true | $false>] [-TransportSyncLinkedInEnabled <$true | $false>] [-TransportSyncLogEnabled <$true | $false>] [-TransportSyncLogFilePath <LocalLongFullPath>] [-TransportSyncLogLoggingLevel <None | Error | Information | Verbose | RawData | Debugging>] [-TransportSyncLogMaxAge <EnhancedTimeSpan>] [-TransportSyncLogMaxDirectorySize <ByteQuantifiedSize>] [-TransportSyncLogMaxFileSize <ByteQuantifiedSize>] [-TransportSyncMaxDownloadItemsPerConnection <Int32>] [-TransportSyncMaxDownloadSizePerConnection <ByteQuantifiedSize>] [-TransportSyncMaxDownloadSizePerItem <ByteQuantifiedSize>] [-TransportSyncPopEnabled <$true | $false>] [-TransportSyncRemoteConnectionTimeout <EnhancedTimeSpan>] [-UseDowngradedExchangeServerAuth <$true | $false>] [-WhatIf [<SwitchParameter>]] [-WindowsLiveHotmailTransportSyncEnabled <$true | $false>] [-WlmLogMaxAge <EnhancedTimeSpan>] [-WlmLogMaxDirectorySize <Unlimited>] [-WlmLogMaxFileSize <Unlimited>] [-WlmLogPath <LocalLongFullPath>]

This example sets the DelayNotificationTimeout parameter to 13 hours on server named Mailbox01.

Set-TransportServer Mailbox01 -DelayNotificationTimeout 13:00:00

This example sets the TransientFailureRetryCount parameter to 3 and sets the TransientFailureRetryInterval parameter to 30 seconds on server named Mailbox01.

Set-TransportServer Mailbox01 -TransientFailureRetryCount 3 -TransientFailureRetryInterval 00:00:30

This example sets the ReceiveProtocolLogPath parameter to C:\SMTP Protocol Logs\Receive.log on server Mailbox01.

Set-TransportServer Mailbox01 -ReceiveProtocolLogPath "C:\SMTP Protocol Logs\Receive.log"

The Set-TransportServer cmdlet will be removed in a future version of Exchange. You should use the Set-TransportService cmdlet instead.

You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Transport service" and "Edge Transport server" entries in the Mail flow permissions topic.

 

Parameter Required Type Description

Identity

Required

Microsoft.Exchange.Configuration.Tasks.ServerIdParameter

The Identity parameter specifies the server that you want to modify.

ActiveUserStatisticsLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The ActiveUserStatisticsLogMaxAge parameter specifies the maximum duration that the per user activity statistics log files are kept. Log files older than the specified value are deleted. The default value is 30 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 10 days for this parameter, use 10.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of this parameter to 00:00:00 prevents the automatic removal of server statistics log files.

ActiveUserStatisticsLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

The ActiveUserStatisticsLogMaxDirectorySize parameter specifies the cap on the size of the per user activity statistics log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The minimum value is 1 megabyte (MB). The default value is 250 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the ActiveUserStatisticsLogMaxFileSize parameter must be less than or equal to the value of the ActiveUserStatisticsLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the server statistics log directory.

ActiveUserStatisticsLogMaxFileSize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

The ActiveUserStatisticsLogMaxFileSize parameter specifies the maximum file size for the per user activity statistics log files. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the ActiveUserStatisticsLogMaxFileSize parameter must be less than or equal to the value of the ActiveUserStatisticsLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the server statistics log files.

ActiveUserStatisticsLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The ActiveUserStatisticsLogPath parameter specifies the location of per user activity statistics log storage. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\ActiveUsersStats. Setting the value of this parameter to $null disables server statistics logging.

AgentLogEnabled

Optional

System.Boolean

The AgentLogEnabled parameter specifies whether the agent log is enabled. The default value is $true.

AgentLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The AgentLogMaxAge parameter specifies the maximum age for the agent log file. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

Setting the value of the AgentLogMaxAge parameter to 00:00:00 prevents the automatic removal of agent log files because of their age.

AgentLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The AgentLogMaxDirectorySize parameter specifies the maximum size of all agent logs in the agent log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 250 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the AgentLogMaxFileSize parameter must be less than or equal to the value of the AgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log directory.

AgentLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

The AgentLogMaxFileSize parameter specifies the maximum size of each agent log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the AgentLogMaxFileSize parameter must be less than or equal to the value of the AgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log files.

AgentLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The AgentLogPath parameter specifies the default agent log directory location. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\AgentLog. Setting the value of this parameter to $null disables agent logging. However, setting this parameter to $null when the value of the AgentLogEnabled attribute is $true generates event log errors.

AntispamAgentsEnabled

Optional

System.Boolean

The AntispamAgentsEnabled parameter specifies whether anti-spam agents are installed on the server specified with the Identity parameter. The default value is $false for the Transport service on Mailbox servers and $true on Edge servers.

ImportantImportant:
You set this parameter by using a script. You shouldn't modify this parameter manually.

Confirm

Optional

System.Management.Automation.SwitchParameter

The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.

ConnectivityLogEnabled

Optional

System.Boolean

The ConnectivityLogEnabled parameter specifies whether the connectivity log is enabled. The default value is $true.

ConnectivityLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The ConnectivityLogMaxAge parameter specifies the maximum age for the connectivity log file. Log files older than the specified value are deleted. The default value is 30 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 25 days for this parameter, use 25.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the ConnectivityLogMaxAge parameter to 00:00:00 prevents the automatic removal of connectivity log files because of their age.

ConnectivityLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The ConnectivityLogMaxDirectorySize parameter specifies the maximum size of all connectivity logs in the connectivity log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 1000 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the ConnectivityLogMaxFileSize parameter must be less than or equal to the value of the ConnectivityLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the connectivity log directory.

ConnectivityLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

The ConnectivityLogMaxFileSize parameter specifies the maximum size of each connectivity log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the ConnectivityLogMaxFileSize parameter must be less than or equal to the value of the ConnectivityLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the connectivity log files.

ConnectivityLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The ConnectivityLogPath parameter specifies the default connectivity log directory location. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\Connectivity. Setting the value of this parameter to $null disables connectivity logging. However, setting this parameter to $null when the value of the ConnectivityLogEnabled attribute is $true generates event log errors.

ContentConversionTracingEnabled

Optional

System.Boolean

The ContentConversionTracingEnabled parameter specifies whether content conversion tracing is enabled. Content conversion tracing captures content conversion failures that occur in the Transport service on a Mailbox server or on the Edge server. The default value is $false. Content conversion tracing captures a maximum of 128 MB of content conversion failures. When the 128 MB limit is reached, no more content conversion failures are captured. Content conversion tracing captures the complete contents of e-mail messages to the path specified by the PipelineTracingPath parameter. Make sure that you restrict access to this directory. The permissions required on the directory specified by the PipelineTracingPath parameter are as follows:

  • Administrators: Full Control

  • Network Service: Full Control

  • System: Full Control

DelayNotificationTimeout

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The DelayNotificationTimeout parameter specifies how long the server waits before it generates a delayed delivery status notification (DSN) message. The default value is 4 hours.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 3.5 hours for this parameter, use 03:30:00. The valid input range for this parameter is from 00:00:01 through 30.00:00:00. The value of the DelayNotificationTimeout parameter should always be greater than the value of the TransientFailureRetryCount parameter multiplied by the value of the TransientFailureRetryInterval parameter.

DeltaSyncClientCertificateThumbprint

Optional

System.String

This parameter is reserved for internal Microsoft use.

DnsLogEnabled

Optional

System.Boolean

The DnsLogEnabled parameter specifies whether the DNS log is enabled. The default value is $false.

DnsLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The DnsLogMaxAge parameter specifies the maximum age for the DNS log file. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

Setting the value of the DnsLogMaxAge parameter to 00:00:00 prevents the automatic removal of DNS log files because of their age.

DnsLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The DnsLogMaxDirectorySize parameter specifies the maximum size of all DNS logs in the DNS log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 100 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the DnsLogMaxFileSize parameter must be less than or equal to the value of the DnsLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the DNS log directory.

DnsLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

The DnsLogMaxFileSize parameter specifies the maximum size of each DNS log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the DnsLogMaxFileSize parameter must be less than or equal to the value of the DnsLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the DNS log files.

DnsLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The DnsLogPath parameter specifies the DNS log directory location. The default value is blank ($null), which indicates no location is configured. If you enable DNS logging, you need to specify a local file path for the DNS log files by using this parameter. If the path contains spaces, enclose the entire path value in quotation marks (").

DomainController

Optional

Microsoft.Exchange.Data.Fqdn

The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.

The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.

ExternalDNSAdapterEnabled

Optional

System.Boolean

The ExternalDNSAdapterEnabled parameter specifies one or more Domain Name System (DNS) servers that Exchange uses for external DNS lookups. When the ExternalDNSAdapterEnabled parameter is set to $true, DNS lookups of destinations outside the Exchange organization are performed by using the DNS settings of the external network adapter specified by the value of the ExternalDNSAdapterGuid parameter. If you want to specify a custom list of DNS servers used for external Exchange DNS lookups only, you must specify the DNS servers by using the ExternalDNSServers parameter, and you must also set the value of the ExternalDNSAdapterEnabled parameter to $false. The default value of the ExternalDNSAdapterEnabled parameter is $true.

ExternalDNSAdapterGuid

Optional

System.Guid

The ExternalDNSAdapterGuid parameter specifies the network adapter that has the DNS settings used for DNS lookups of destinations that exist outside the Exchange organization. The concept of an external network adapter and an internal network adapter is only applicable in a multi-homed Exchange server environment. When no particular network adapter is specified as the network adapter for external DNS lookups, the value of the ExternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000, and external DNS lookups are performed by using the DNS settings of any available network adapter. You may enter the GUID of a specific network adapter to use for external DNS lookups. The default value of the ExternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000.

NoteNote:
If the value of the ExternalDNSAdapterEnabled parameter is set to $false, the value of the ExternalDNSAdapterGuid parameter is ignored, and the list of DNS servers from the ExternalDNSServers parameter is used.

ExternalDNSProtocolOption

Optional

Microsoft.Exchange.Data.ProtocolOption

The ExternalDNSProtocolOption parameter specifies which protocol to use when querying external DNS servers. The valid options for this parameter are Any, UseTcpOnly, and UseUdpOnly. The default value is Any.

ExternalDNSServers

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExternalDNSServers parameter specifies the list of external DNS servers that the server queries when resolving a remote domain. DNS servers are specified by IP address. The default value is an empty list ({}).

To enter multiple values and overwrite any existing entries, use the following syntax: <value1>,<value2>.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>"....

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

NoteNote:
If the value of the ExternalDNSAdapterEnabled parameter is set to $true, the ExternalDNSServers parameter and its list of DNS servers isn't used.

ExternalIPAddress

Optional

System.Net.IPAddress

The ExternalIPAddress parameter specifies the IP address used in the Received message header field for every message that travels through the Edge server or the Transport service on a Mailbox server. The IP address in the Received header field is used for hop count and routing loop detection. The IP address specified by the ExternalIPAddress parameter overrides the external network adapter's actual IP address. Typically, you would want to set the value of the ExternalIPAddress parameter to match the value of your domain's public MX record. The default value of the ExternalIPAddress parameter is blank. This means the actual IP address of the external network adapter is used in the Received header field.

FlowControlLogEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

FlowControlLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

This parameter is reserved for internal Microsoft use.

FlowControlLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

FlowControlLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

FlowControlLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

This parameter is reserved for internal Microsoft use.

HttpProtocolLogEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

HttpProtocolLogFilePath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

This parameter is reserved for internal Microsoft use.

HttpProtocolLogLoggingLevel

Optional

Microsoft.Exchange.Data.ProtocolLoggingLevel

This parameter is reserved for internal Microsoft use.

HttpProtocolLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

This parameter is reserved for internal Microsoft use.

HttpProtocolLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

This parameter is reserved for internal Microsoft use.

HttpProtocolLogMaxFileSize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

This parameter is reserved for internal Microsoft use.

HttpTransportSyncProxyServer

Optional

System.String

This parameter is reserved for internal Microsoft use.

InternalDNSAdapterEnabled

Optional

System.Boolean

The InternalDNSAdapterEnabled parameter specifies one or more DNS servers that Exchange uses for internal DNS lookups. When the InternalDNSAdapterEnabled parameter is set to $true, DNS lookups of destinations inside the Exchange organization are performed by using the DNS settings of the internal network adapter specified by the value of the InternalDNSAdapterGuid parameter. If you want to specify a custom list of DNS servers used for internal Exchange DNS lookups only, you must specify the DNS servers by using the InternalDNSServers parameter, and you must also set the value of the InternalDNSAdapterEnabled parameter to $false. The default value of the InternalDNSAdapterEnabled parameter is $true.

InternalDNSAdapterGuid

Optional

System.Guid

The InternalDNSAdapterGuid parameter specifies the network adapter that has the DNS settings used for DNS lookups of servers that exist inside the Exchange organization. The concept of an internal network adapter and an external network adapter is only applicable in a multi-homed Exchange server environment. When no particular network adapter is specified as the network adapter for external DNS lookups, the value of the InternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000, and internal DNS lookups are performed by using the DNS settings of any available network adapter. You may enter the GUID of a specific network adapter to use for internal DNS lookups. The default value of the InternalDNSAdapterGuid parameter is 00000000-0000-0000-0000-000000000000.

NoteNote:
If the value of the InternalDNSAdapterEnabled parameter is set to $false, the value of the InternalDNSAdapterGuid parameter is ignored, and the list of DNS servers from the InternalDNSServers parameter is used.

InternalDNSProtocolOption

Optional

Microsoft.Exchange.Data.ProtocolOption

The InternalDNSProtocolOption parameter specifies which protocol to use when you query internal DNS servers. Valid options for this parameter are Any, UseTcpOnly, or UseUdpOnly.

The default value is Any.

InternalDNSServers

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The InternalDNSServers parameter specifies the list of DNS servers that should be used when resolving a domain name. DNS servers are specified by IP address. The default value is any empty list ({}).

To enter multiple values and overwrite any existing entries, use the following syntax: <value1>,<value2>.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>"....

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

NoteNote:
If the InternalDNSAdapterGuid parameter is set, and the value of the InternalDNSAdapterEnabled parameter is set to $true, the InternalDNSServers parameter and its list of DNS servers isn't used.

IntraOrgConnectorProtocolLoggingLevel

Optional

Microsoft.Exchange.Data.ProtocolLoggingLevel

The IntraOrgConnectorProtocolLoggingLevel parameter enables or disables SMTP protocol logging on the implicit and invisible intra-organization Send connectors that are used to transmit messages between Exchange servers in the Exchange organization.

Valid values for this parameter are None or Verbose. The value Verbose enables protocol logging for the connector. The value None disables protocol logging for the connector. The default value is None. When the IntraOrgConnectorProtocolLoggingLevel parameter is set to Verbose, the information is written to the Send connector protocol log specified by the SendProtocolLog parameters.

IntraOrgConnectorSmtpMaxMessagesPerConnection

Optional

System.Int32

The IntraOrgConnectorSmtpMaxMessagesPerConnection parameter specifies the maximum number of messages per connection limit on the implicit and invisible intra-organization Send connectors that are used to transmit messages between Exchange servers in the Exchange organization.

IrmLogEnabled

Optional

System.Boolean

The IrmLogEnabled parameter enables logging of Information Rights Management (IRM) transactions. IRM logging is enabled by default. Values include:

  • $true   Enable IRM logging

  • $false   Disable IRM logging

IrmLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The IrmLogMaxAge parameter specifies the maximum age for the IRM log file. Log files that are older than the specified value are deleted. The default value is 30 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

The valid input range for this parameter is 00:00:00 to 24855.03:14:07. Setting the value of the IrmLogMaxAge parameter to 00:00:00 prevents the automatic removal of connectivity log files because of their age.

IrmLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

This IrmLogMaxDirectorySize parameter specifies the maximum size of all IRM logs in the connectivity log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 250 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the IrmLogMaxFileSize parameter must be less than or equal to the value of the IrmLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the IRM log directory.

IrmLogMaxFileSize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

This IrmLogMaxFileSize parameter specifies the maximum size of each IRM log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the IrmLogMaxFileSize parameter must be less than or equal to the value of the IrmLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the IRM log files.

IrmLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The IrmLogPath parameter specifies the default IRM log directory location. The default location is %ExchangeInstallPath%Logging\IRMLogs. If you set the value of the IrmLogPath parameter to $null, you effectively disable IRM logging. However, if you set the value of the IrmLogPath parameter to $null when the value of the IrmLogEnabled attribute is $true, Exchange will log errors in the Application event log. The preferred way for disabling IRM logging is to set the IrmLogEnabled to $false.

JournalLogEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

JournalLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

This parameter is reserved for internal Microsoft use.

JournalLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

JournalLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

JournalLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

This parameter is reserved for internal Microsoft use.

MaxActiveTransportSyncJobsPerProcessor

Optional

System.Int32

This parameter is reserved for internal Microsoft use.

MaxConcurrentMailboxDeliveries

Optional

System.Int32

The MaxConcurrentMailboxDeliveries parameter specifies the maximum number of delivery threads that the transport service can have open at the same time to deliver messages to mailboxes. The default value is 20. The valid input range for this parameter is from 1 through 256. We recommend that you don't modify the default value unless Microsoft Customer Service and Support advises you to do this.

MaxConcurrentMailboxSubmissions

Optional

System.Int32

The MaxConcurrentMailboxSubmissions parameter specifies the maximum number of submission threads that the transport service can have open at the same time to send messages from mailboxes. The default value is 20. The valid input range for this parameter is from 1 through 256.

MaxConnectionRatePerMinute

Optional

System.Int32

The MaxConnectionRatePerMinute parameter specifies the maximum rate that connections are allowed to be opened with the transport service. If many connections are attempted with the transport service at the same time, the MaxConnectionRatePerMinute parameter limits the rate that the connections are opened so that the server's resources aren't overwhelmed. The default value is 1200 connections per minute. The valid input range for this parameter is from 1 through 2147483647.

MaxNumberOfTransportSyncAttempts

Optional

System.Int32

This parameter is reserved for internal Microsoft use.

MaxOutboundConnections

Optional

Microsoft.Exchange.Data.Unlimited

The MaxOutboundConnections parameter specifies the maximum number of outbound connections that can be open at a time. The default value is 1000. The valid input range for this parameter is from 1 through 2147483647. If you enter a value of unlimited, no limit is imposed on the number of outbound connections. The value of the MaxOutboundConnections parameter must be greater than or equal to the value of the MaxPerDomainOutboundConnections parameter.

MaxPerDomainOutboundConnections

Optional

Microsoft.Exchange.Data.Unlimited

The MaxPerDomainOutboundConnections parameter specifies the maximum number of concurrent connections to any single domain. The default value is 20. The valid input range for this parameter is from 1 through 2147483647. If you enter a value of unlimited, no limit is imposed on the number of outbound connections per domain. The value of the MaxPerDomainOutboundConnections parameter must be less than or equal to the value of the MaxOutboundConnections parameter.

MessageExpirationTimeout

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The MessageExpirationTimeout parameter specifies the maximum time that a particular message can remain in a queue. If a message remains in the queue for longer than this period of time, the message is returned to the sender as a permanent failure. The default value is 2 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 3 days for this parameter, use 3.00:00:00. The valid input range for this parameter is from 00:00:05 through 90.00:00:00.

MessageRetryInterval

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The MessageRetryInterval parameter specifies the retry interval for individual messages after a connection failure with a remote server. The default value is 1 minute.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 2 minutes for this parameter, use 00:02:00. The valid input range for this parameter is from 00:00:01 through 1.00:00:00. We recommend that you don't modify the default value unless Customer Service and Support advises you to do this.

MessageTrackingLogEnabled

Optional

System.Boolean

The MessageTrackingLogEnabled parameter specifies whether message tracking is enabled. The default value is $true.

MessageTrackingLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The MessageTrackingLogMaxAge parameter specifies the message tracking log maximum file age. Log files older than the specified value are deleted. The default value is 30 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 20 days for this parameter, use 20.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the MessageTrackingLogMaxAge parameter to 00:00:00 prevents the automatic removal of message tracking log files because of their age.

MessageTrackingLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The MessageTrackingLogMaxDirectorySize parameter specifies the maximum size of the message tracking log directory. When the maximum directory size is reached, the server deletes the oldest log files first.

The maximum size of the message tracking log directory is calculated as the total size of all log files that have the same name prefix. Other files that don't follow the name prefix convention aren't counted in the total directory size calculation. Renaming old log files or copying other files into the message tracking log directory could cause the directory to exceed its specified maximum size.

For Mailbox servers, the maximum size of the message tracking log directory isn't the specified maximum size because the message tracking log files generated by the Transport service and the Mailbox Transport service have different name prefixes. Message tracking log files for the Transport service or for Edge servers begin with the name prefix MSGTRK. Message tracking log files for the Mailbox Transport service begin with the name prefix MSGTRKM. For Mailbox servers, the maximum size of the message tracking log directory is two times the specified value.

The default value is 1000 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the MessageTrackingLogMaxFileSize parameter must be less than or equal to the value of the MessageTrackingLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the message tracking log directory.

MessageTrackingLogMaxFileSize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

The MessageTrackingLogMaxFileSize parameter specifies the maximum size of the message tracking log files. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the MessageTrackingLogMaxFileSize parameter must be less than or equal to the value of the MessageTrackingLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 4294967296 bytes (4 GB). If you enter a value of unlimited, no size limit is imposed on the message tracking log files.

MessageTrackingLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The MessageTrackingLogPath parameter specifies the location of the message tracking logs. The default location is %ExchangeInstallPath%TransportRoles\Logs\MessageTracking. Setting the value of this parameter to $null disables message tracking. However, setting this parameter to $null when the value of the MessageTrackingLogEnabled attribute is $true generates event log errors. The preferred method to disable message tracking is to use the MessageTrackingLogEnabled parameter.

MessageTrackingLogSubjectLoggingEnabled

Optional

System.Boolean

The MessageTrackingLogSubjectLoggingEnabled parameter specifies whether the message subject should be included in the message tracking log. The default value is $true.

OutboundConnectionFailureRetryInterval

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The OutboundConnectionFailureRetryInterval parameter specifies the retry interval for subsequent connection attempts to a remote server where previous connection attempts have failed. The previously failed connection attempts are controlled by the TransientFailureRetryCount and TransientFailureRetryInterval parameters. For the Transport service on a Mailbox server, the default value of the OutboundConnectionFailureRetryInterval parameter is 10 minutes. On an Edge server, the default value is 30 minutes.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 15 minutes for this parameter, use 00:15:00. The valid input range for this parameter is from 00:00:01 through 20.00:00:00.

PickupDirectoryMaxHeaderSize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

The PickupDirectoryMaxHeaderSize parameter specifies the maximum message header size that can be submitted to the Pickup directory. The default value is 64 KB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The valid input range for this parameter is from 32768 through 2147483647 bytes.

PickupDirectoryMaxMessagesPerMinute

Optional

System.Int32

The PickupDirectoryMaxMessagesPerMinute parameter specifies the maximum number of messages processed per minute by the Pickup directory and by the Replay directory. Each directory can independently process message files at the rate specified by the PickupDirectoryMaxMessagesPerMinute parameter. The default value is 100. The valid input range for this parameter is from 1 through 20000.

PickupDirectoryMaxRecipientsPerMessage

Optional

System.Int32

The PickupDirectoryMaxRecipientsPerMessage parameter specifies the maximum number of recipients that can be included on an e-mail message. The default value is 100. The valid input range for this parameter is from 1 through 10000.

PickupDirectoryPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The PickupDirectoryPath parameter specifies the location of the Pickup directory. The Pickup directory is used by administrators and third-party applications to create and submit messages. The default location is %ExchangeInstallPath%TransportRoles\Pickup. If the value of the PickupDirectoryPath parameter is set to $null, the Pickup directory is disabled.

PipelineTracingEnabled

Optional

System.Boolean

The PipelineTracingEnabled parameter specifies whether to enable pipeline tracing. Pipeline tracing captures message snapshot files that record the changes made to the message by each transport agent configured in the transport service on the server. Pipeline tracing creates verbose log files that accumulate quickly. Pipeline tracing should only be enabled for a short time to provide in-depth diagnostic information that enables you to troubleshoot problems. In addition to troubleshooting, you can use pipeline tracing to validate changes that you make to the configuration of the transport service where you enable pipeline tracing. The default value is $false.

PipelineTracingPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The PipelineTracingPath parameter specifies the location of the pipeline tracing logs. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\PipelineTracing. The path must be local to the Exchange computer. Setting the value of this parameter to $null disables pipeline tracing. However, setting this parameter to $null when the value of the PipelineTracingEnabled attribute is $true generates event log errors. The preferred method to disable pipeline tracing is to use the PipelineTracingEnabled parameter. Pipeline tracing captures the complete contents of e-mail messages to the path specified by the PipelineTracingPath parameter. Make sure that you restrict access to this directory. The permissions required on the directory specified by the PipelineTracingPath parameter are as follows:

  • Administrators: Full Control

  • Network Service: Full Control

  • System: Full Control

PipelineTracingSenderAddress

Optional

Microsoft.Exchange.Data.SmtpAddress

The PipelineTracingSenderAddress parameter specifies the sender e-mail address that invokes pipeline tracing. Only messages from this address generate pipeline tracing output. The address can be either inside or outside the Exchange organization. Depending on your requirements, you may have to set this parameter to different sender addresses and send new messages to start the transport agents or routes that you want to test. The default value of this parameter is $null.

PoisonMessageDetectionEnabled

Optional

System.Boolean

The PoisonMessageDetectionEnabled parameter specifies whether poison messages should be detected. The default value is $true. Poison messages are messages determined to be potentially harmful to the Exchange system after a server failure. Poison messages are put in the poison message queue. We recommend that you don't modify the default value unless Customer Service and Support advises you to do this.

PoisonThreshold

Optional

System.Int32

The PoisonThreshold parameter specifies the number of times a message can be rejected before it's classified as a poison message. The default value is 2. We recommend that you don't modify the default value unless Customer Service and Support advises you to do this. The valid input range for this parameter is from 1 through 10.

ProcessingSchedulerLogEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

ProcessingSchedulerLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

This parameter is reserved for internal Microsoft use.

ProcessingSchedulerLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

ProcessingSchedulerLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

ProcessingSchedulerLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

This parameter is reserved for internal Microsoft use.

QueueLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The QueueLogMaxAge parameter specifies the maximum age of the queue log files. Log files that are older than the specified value are deleted. The default value is 7 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 10 days for this parameter, use 10.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the QueueLogMaxAge parameter to 00:00:00 prevents the automatic removal of queue log files because of their age.

QueueLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The QueueLogMaxDirectorySize parameter specifies the maximum size of the queue log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The default value is 200 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the QueueLogMaxFileSize parameter must be less than or equal to the value of the QueueLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the queue log directory.

QueueLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

The QueueLogMaxFileSize parameter specifies the maximum size of the queue log files. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the QueueLogMaxFileSize parameter must be less than or equal to the value of the QueueLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the queue log files.

QueueLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The QueueLogPath parameter specifies the path of the queue log directory. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\QueueViewer. Setting the value of this parameter to $null disables queue logging.

QueueMaxIdleTime

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The QueueMaxIdleTime parameter specifies the period of time an empty delivery queue can exist before the queue is removed. The default value is 3 minutes.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 5 minutes for this parameter, use 00:05:00. The valid input range for this parameter is from 00:00:05 through 01:00:00. We recommend that you don't modify the default value unless Customer Service and Support advises you to do this.

ReceiveProtocolLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The ReceiveProtocolLogMaxAge parameter specifies the maximum age of the Receive connector protocol log file. Log files that are older than the specified value are deleted. The default value is 30 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 20 days for this parameter, use 20.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the ReceiveProtocolLogMaxAge parameter to 00:00:00 prevents the automatic removal of Receive connector protocol log files because of their age.

ReceiveProtocolLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The ReceiveProtocolLogMaxDirectorySize parameter specifies the maximum size of the Receive connector protocol log directory shared by all the Receive connectors that exist on the server. When the maximum directory size is reached, the server deletes the oldest log files first. The default value is 250 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the ReceiveProtocolLogMaxFileSize parameter must be less than or equal to the value of the ReceiveProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Receive connector protocol log directory.

ReceiveProtocolLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

The ReceiveProtocolLogMaxFileSize parameter specifies the maximum size of the Receive connector protocol log files shared by all the Receive connectors that exist on the server. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the ReceiveProtocolLogMaxFileSize parameter must be less than or equal to the value of the ReceiveProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Receive connector protocol log files.

ReceiveProtocolLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The ReceiveProtocolLogPath parameter specifies the path of the protocol log directory for all the Receive connectors that exist on the server. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\ProtocolLog\SmtpReceive. Setting the value of this parameter to $null disables protocol logging for all Receive connectors on the server. However, setting this parameter to $null when the value of the ProtocolLoggingLevel attribute for any Receive connector on the server is Verbose generates event log errors. The preferred method of disabling protocol logging is to use the Set-ReceiveConnector cmdlet to set the ProtocolLoggingLevel to None on each Receive connector.

RecipientValidationCacheEnabled

Optional

System.Boolean

The RecipientValidationCacheEnabled parameter specifies whether the recipient addresses used by transport agents, such as the Recipient Filtering agent, are cached. The default value is $true on Edge servers and $false for the Transport service on Mailbox servers.

ReplayDirectoryPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The ReplayDirectoryPath parameter specifies the path of the Replay directory. The Replay directory is used to resubmit exported messages and to receive messages from foreign gateway servers. The default location is %ExchangeInstallPath%TransportRoles\Replay. If the value of the ReplayDirectoryPath parameter is set to $null, the Replay directory is disabled.

ResourceLogEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

ResourceLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

This parameter is reserved for internal Microsoft use.

ResourceLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

ResourceLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

ResourceLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

This parameter is reserved for internal Microsoft use.

RootDropDirectoryPath

Optional

System.String

The RootDropDirectoryPath parameter specifies the top-level location of the Drop directory used by all Foreign connectors defined in the Transport service on a Mailbox server. The value of the RootDropDirectoryPath parameter may be a local path, or a Universal Naming Convention (UNC) path to a remote server. By default, the RootDropDirectoryPath parameter is blank. This indicates the value of RootDropDirectoryPath is the Exchange installation folder. The RootDropDirectoryPath parameter is used with the DropDirectory parameter in the Set-ForeignConnector cmdlet to specify the location for outgoing messages going to the address spaces defined on the Foreign connector.

RoutingTableLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The RoutingTableLogMaxAge parameter specifies the maximum routing table log age. Log files older than the specified value are deleted. The default value is 7 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 5 days for this parameter, use 5.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the RoutingTableLogMaxAge parameter to 00:00:00 prevents the automatic removal of routing table log files because of their age.

RoutingTableLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The RoutingTableLogMaxDirectorySize parameter specifies the maximum size of the routing table log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The default value is 50 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The valid input range for this parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the routing table log directory.

RoutingTableLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The RoutingTableLogPath parameter specifies the directory location where routing table log files should be stored. The default location is %ExchangeInstallPath%TransportRoles\Logs\Routing. Setting the value of the RoutingTableLogPath parameter to $null disables routing table logging.

SendProtocolLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The SendProtocolLogMaxAge parameter specifies the Send connector protocol log file maximum age. Log files older than the specified value are deleted. The default value is 30 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 25 days for this parameter, use 25.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the SendProtocolLogMaxAge parameter to 00:00:00 prevents the automatic removal of Send connector protocol log files because of their age.

SendProtocolLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The SendProtocolLogMaxDirectorySize parameter specifies the maximum size of the Send connector protocol log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The minimum value is 1 MB. The default value is 250 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the SendProtocolLogMaxFileSize parameter must be less than or equal to the value of the SendProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Send connector protocol log directory.

SendProtocolLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

The SendProtocolLogMaxFileSize parameter specifies the maximum size of the Send connector protocol log files shared by all the Send connectors that exist on a server. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the SendProtocolLogMaxFileSize parameter must be less than or equal to the value of the SendProtocolLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the Send connector protocol log files.

SendProtocolLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The SendProtocolLogPath parameter specifies the location of protocol log storage for the Send connectors. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\ProtocolLog\SmtpSend. Setting the value of this parameter to $null disables protocol logging for all Send connectors on the server. However, setting this parameter to $null when the value of the ProtocolLoggingLevel or IntraOrgConnectorProtocolLoggingLevel attribute for any Send connector on the server is Verbose generates event log errors. The preferred method of disabling protocol logging is to use the Set-SendConnector cmdlet to set the ProtocolLoggingLevel parameter to None on each Send connector and to set the IntraOrgConnectorProtocolLoggingLevel parameter to None.

ServerStatisticsLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The ServerStatisticsLogMaxAge parameter specifies the maximum duration that the server statistics log files are kept. Log files older than the specified value are deleted. The default value is 30 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 60 days for this parameter, use 60.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of this parameter to 00:00:00 prevents the automatic removal of server statistics log files.

ServerStatisticsLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

The ServerStatisticsLogMaxDirectorySize parameter specifies the cap on the size of the server statistics log directory. When the maximum directory size is reached, the server deletes the oldest log files first. The minimum value is 1 MB. The default value is 250 MB. When you enter a value, qualify the value with one of the following:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the ServerStatisticsLogMaxFileSize parameter must be less than or equal to the value of the ServerStatisticsLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the server statistics log directory.

ServerStatisticsLogMaxFileSize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

The ServerStatisticsLogMaxFileSize parameter specifies the maximum file size for the server statistics log files. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are treated as bytes.

The value of the ServerStatisticsLogMaxFileSize parameter must be less than or equal to the value of the ServerStatisticsLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the server statistics log files.

ServerStatisticsLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The ServerStatisticsLogPath parameter specifies the location of server statistics log storage. The default location is %ExchangeInstallPath%TransportRoles\Logs\Hub\ServerStats. Setting the value of this parameter to $null disables server statistics logging.

SmtpEnableAllTlsVersions

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

TransientFailureRetryCount

Optional

System.Int32

The TransientFailureRetryCount parameter specifies the maximum number of immediate connection retries attempted when the server encounters a connection failure with a remote server. The default value is 6. The valid input range for this parameter is from 0 through 15. When the value of this parameter is set to 0, the server doesn't immediately attempt to retry an unsuccessful connection, and the next connection attempt is controlled by the OutboundConnectionFailureRetryInterval parameter.

TransientFailureRetryInterval

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The TransientFailureRetryInterval parameter controls the connection interval between each connection attempt specified by the TransientFailureRetryCount parameter. For the Transport service on a Mailbox server, the default value of the TransientFailureRetryInterval parameter is 5 minutes. On an Edge server, the default value is 10 minutes.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify 8 minutes for this parameter, use 00:08:00. The valid input range for this parameter is from 00:00:01 through 12:00:00.

TransportMaintenanceLogEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

TransportMaintenanceLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

This parameter is reserved for internal Microsoft use.

TransportMaintenanceLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

TransportMaintenanceLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

TransportMaintenanceLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

This parameter is reserved for internal Microsoft use.

TransportSyncAccountsPoisonAccountThreshold

Optional

System.Int32

This parameter is reserved for internal Microsoft use.

TransportSyncAccountsPoisonDetectionEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

TransportSyncAccountsPoisonItemThreshold

Optional

System.Int32

This parameter is reserved for internal Microsoft use.

TransportSyncAccountsSuccessivePoisonItemThreshold

Optional

System.Int32

This parameter is reserved for internal Microsoft use.

TransportSyncEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

TransportSyncExchangeEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

TransportSyncFacebookEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

TransportSyncHubHealthLogEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

TransportSyncHubHealthLogFilePath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

This parameter is reserved for internal Microsoft use.

TransportSyncHubHealthLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

This parameter is reserved for internal Microsoft use.

TransportSyncHubHealthLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

This parameter is reserved for internal Microsoft use.

TransportSyncHubHealthLogMaxFileSize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

This parameter is reserved for internal Microsoft use.

TransportSyncImapEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

TransportSyncLinkedInEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

TransportSyncLogEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

TransportSyncLogFilePath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

This parameter is reserved for internal Microsoft use.

TransportSyncLogLoggingLevel

Optional

Microsoft.Exchange.Data.SyncLoggingLevel

This parameter is reserved for internal Microsoft use.

TransportSyncLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

This parameter is reserved for internal Microsoft use.

TransportSyncLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

This parameter is reserved for internal Microsoft use.

TransportSyncLogMaxFileSize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

This parameter is reserved for internal Microsoft use.

TransportSyncMaxDownloadItemsPerConnection

Optional

System.Int32

This parameter is reserved for internal Microsoft use.

TransportSyncMaxDownloadSizePerConnection

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

This parameter is reserved for internal Microsoft use.

TransportSyncMaxDownloadSizePerItem

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

This parameter is reserved for internal Microsoft use.

TransportSyncPopEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

TransportSyncRemoteConnectionTimeout

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

This parameter is reserved for internal Microsoft use.

UseDowngradedExchangeServerAuth

Optional

System.Boolean

The UseDowngradedExchangeServerAuth parameter specifies whether the Generic Security Services application programming interface (GSSAPI) authentication method is used on connections where Transport Layer Security (TLS) is disabled.

Normally, TLS is required for connections between the Transport services on Mailbox servers in your organization. On TLS secured connections, Kerberos authentication is used by default. However, there may be scenarios where you need to disable TLS between specific Transport services in your organization. When you do that, you need to set this parameter to $true to provide an alternative authentication method. The default value is $false. You shouldn't set this value to $true unless it's absolutely required.

If you set this parameter to $true, you also need to create a specific Receive connector to service the non-TLS connections. This Receive connector must have remote IP address ranges specified to ensure that it's only used for non-TLS connections. You also must set the SuppressXAnonymousTls attribute of the Receive connector to $true.

WhatIf

Optional

System.Management.Automation.SwitchParameter

The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.

WindowsLiveHotmailTransportSyncEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

WlmLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

This parameter is reserved for internal Microsoft use.

WlmLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

WlmLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

WlmLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

This parameter is reserved for internal Microsoft use.

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn’t accept input data.

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn’t return data.

 
Was this page helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft