Export (0) Print
Expand All

Edit an E-Mail Address Policy

Exchange 2010
 

Applies to: Exchange Server 2010 SP3, Exchange Server 2010 SP2

Topic Last Modified: 2011-04-28

E-mail address policies generate the primary and secondary e-mail addresses for your recipients (which include users, contacts, and groups) so they can receive and send e-mail. You can use the Edit E-mail Address Policy wizard to modify the settings of a policy.

Looking for other management tasks related to e-mail address policies? Check out Managing E-Mail Address Policies.

You can't use the EMC to edit an e-mail address policy if the policy was created by using one of the following methods:

  • Exchange Server 2003   If this is an Exchange Server 2003 e-mail address policy, you must use Exchange System Manager in Exchange 2003 to edit this object or upgrade the object to an Exchange 2010 object. For more information, see Upgrade Custom LDAP Filters to OPATH Filters.

  • Exchange Management Shell   Some e-mail address policy settings that you can set in the Shell cannot be managed in the EMC. If this is an e-mail address policy that was created or edited by using the Shell, use the Shell to edit this policy.

You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "E-mail address policies" entry in the Mailbox Permissions topic.

  1. In the console tree, navigate to Organization Configuration > Hub Transport.

  2. In the result pane, click the E-mail Address Policies tab, and then select the policy you want to edit.

  3. In the action pane, click Edit.

  4. On the Introduction page, edit the following fields to define the recipient scope:

    • Name   This box contains the display name of the e-mail address policy that you specified when it was created. You can modify the name. The name can contain as many as 64 characters but cannot include wildcard characters.

    • Select the recipient container where you want to apply the filter   If you want to specify a different recipient container, click Browse to open the Select Organizational Unit dialog box. Specify an organizational unit (OU), and then click OK. The recipient container filters the recipients that the e-mail address policy will affect based upon their location in Active Directory.

    • Select the recipient types you want to include in the policy. You can select All recipient types or The following specific types. If you select The following specific types, you can select one or more of the following recipient types:

      Users with Exchange mailboxes   Select this check box if you want your e-mail address policy to apply to users who have Exchange 2010, Exchange Server 2007, or Exchange Server 2003 mailboxes. Users with Exchange mailboxes are those that have a user domain account and a mailbox in the Exchange organization.

      Users with external e-mail addresses   Select this check box if you want your e-mail address policy to apply to users who have external e-mail addresses. Users with external e-mail accounts have user domain accounts in the Active Directory directory service, but use e-mail accounts that are external to the organization. This enables them to be included in the global address list (GAL) and added to distribution lists.

      Resource mailboxes   Select this check box if you want your e-mail address policy to apply to Exchange resource mailboxes. Resource mailboxes let you administer company resources through a mailbox, such as a conference room or a company vehicle.

      Contacts with external e-mail addresses   Select this check box if you want your e-mail address policy to apply to contacts with external e-mail addresses. Contacts with external e-mail accounts do not have user domain accounts in Active Directory, but the external e-mail address is available in the GAL.

      Mail-enabled groups   Select this check box if you want your e-mail address policy to apply to security groups or distribution groups that have been mail-enabled. Mail-enabled groups are similar to distribution groups. E-mail messages that are sent to a mail-enabled group account will be delivered to several recipients.

  5. On the Conditions page, edit the following fields to further filter the recipients who will be affected by this e-mail address policy:

    Step 1: Select condition(s)   Use this section to set one or more conditions for your e-mail address policy. If you don't want to set any conditions for the policy, don't select any of the check boxes.

    You can select from the following conditions:

    • Recipient is in a State or Province   Select this check box if you want the e-mail address policy to include only recipients from specific states or provinces. This information is contained on the Address and Phone tab in the recipient's properties.

    • Recipient is in a Department   Select this check box if you want the e-mail address policy to include only recipients in specific departments. This information is contained on the Organization tab in the recipient's properties.

    • Recipient is in a Company   Select this check box if you want the e-mail address policy to include only recipients in specific companies. This information is contained on the Organization tab in the recipient's properties.

    noteNote:
    The State or Province, Department, and Company conditions are based on attributes that are applicable only to mailboxes, mail users, and mail contacts. These conditions do not apply to mail-enabled distribution groups. If you configure any of these conditions for an e-mail address policy, you will in effect be excluding all mail-enabled distribution groups.
    • Custom Attribute equals Value   There are 15 custom attributes for each recipient. There is a separate condition for each custom attribute. If you want the e-mail address policy to include only recipients that have a specific value set for a specific custom attribute, select the check box that corresponds to that custom attribute.

    Step 2: Edit the conditions by selecting an underlined value   If you select any conditions in Step 1, each condition you select will append to the definition of the e-mail address policy. For example, if you selected the Recipient is in a State or Province check box in Step 1, you will see in the specified State or Province(s) condition in Step 2.

    For each condition, click the underlined term to create your condition. By default, the underlined term for new conditions will read specified. After you edit the condition, the underlined term will change to the value that you specified.

    If you click an underlined value for the State or Province, Department, or Company conditions, a dialog box appears in which you can specify the values for the condition. To create values for the condition, use the following buttons in the dialog box:

    • Add   Enter a value in the text box and click Add. You can add more than one value, but you cannot enter duplicate values.

    • Edit   To modify an existing value, select it from the list, and then click Edit.

    • Remove icon   To remove an existing value, select it from the list, and then click Remove icon.

    If you click an underlined value for a custom attribute condition, a dialog box appears in which you can specify the value for the condition. You can specify a single value for each custom attribute. Type the value in the text box and click OK.

    importantImportant:
    The values that you enter in these dialog boxes must exactly match those that appear in the recipient's properties. For example, if you enter Washington in the Specify State or Province dialog box, but the Address and Phone tab in the recipient's properties lists the state as WA, the condition will not be met.

    Preview   Click this button to view the recipients that will be contained in the e-mail address policy, based on the conditions that you specified.

  6. On the E-Mail Addresses page, specify an e-mail address for your e-mail address policy.

    • Add   Click Add to add a new e-mail address for the policy. Use the drop-down box to select from the following address types:

      SMTP Address   This is the default address type. Click this button and use the corresponding dialog box to add an SMTP address. The following settings are available:

      ▪ Select the E-mail address local part check box and use the corresponding options to configure how the local part of the SMTP e-mail address will appear. The local part of an e-mail address is the name that appears before the at sign (@). If you clear the check box, the local part uses the recipient's alias.

      ▪ Click Select the accepted domain for the e-mail address and then click Browse to select the e-mail address domain to which this e-mail address policy applies. You can also create additional e-mail address policies if your organization receives mail for multiple domains, or if your default domain is used strictly for internal purposes and you use a different external mail domain.

      ▪ Click Specify the custom fully qualified domain name (FQDN) for the e-mail address, and then type the FQDN for the domain part of the e-mail address that appears after the at sign (@). This FQDN must match an accepted domain.

      Custom Address   Click this button and use the corresponding dialog box to add a custom address (for example, fax or X.400).

      noteNote:
      With the exception of X.400 addresses, Exchange doesn't validate custom addresses for proper formatting. You must make sure that the custom address you specify complies with the format requirements for that address type.
    • Edit   Click this button to modify the selected e-mail address.

    • Set as Reply   Click this button to set your selected address as the "reply to" address. A recipient can have multiple e-mail addresses for a specific address type. This allows the recipient to receive messages that are addressed to any one of these e-mail addresses. However, a single address must be used for any messages that are sent by the recipient. If a recipient has multiple e-mail addresses, the primary address is used for any messages sent by the recipient.

      This button is available only when an address other than the primary address is selected. Primary addresses for each address type are displayed in bold type.

      If an e-mail address policy in your Exchange organization applies to a mailbox, the Set as Reply setting will be controlled by that policy. To change the primary address for a specific address type, you must clear the Automatically update e-mail addresses based on e-mail address policy check box.

  7. On the Schedule page, complete the following fields:

    • Apply the e-mail address policy   Select one of the following schedule settings to specify when the e-mail address policy should be applied:

      Do not apply   Click this button to update the e-mail address policy without applying it to the intended recipients.

      Immediately   Select this option to apply the e-mail address policy as soon as the e-mail address policy is edited.

      At the following time   Select this option and use the corresponding lists to specify a time to apply the e-mail address policy.

    • Cancel tasks that are still running after (hours)   Select this check box and use the corresponding text box to specify how long the e-mail address policy task will run. The default is 8 hours.

  8. On the Edit E-Mail Address Policy page, review your configuration settings. Click Edit to apply your changes to the e-mail address policy. Click Back to make any configuration changes.

    noteNote:
    Although the process begins when you click Edit, you may have to wait several hours for the process to complete and the e-mail address policy to be applied.
  9. On the Completion page, review the following, and then click Finish to close the wizard:

    • A status of Completed indicates that the wizard completed the task successfully.

    • A status of Failed indicates that the task wasn't completed. If the task fails, review the summary for an explanation, and then click Back to make any configuration changes.

  10. Click Finish to close the wizard.

You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "E-mail address policies" entry in the Mailbox Permissions topic.

This example edits the e-mail address policy South East Offices that currently includes recipients in Georgia, Alabama, and Louisiana to also include recipients in Texas.

Set-EmailAddressPolicy -Identity "South East Offices" -ConditionalStateorProvince "Georgia","Alabama","Louisiana","Texas"
noteNote:
Although the e-mail address policy is already applied to recipients in Georgia, Alabama, and Louisiana, you must include them in the parameter because the parameter overwrites values; it doesn't append values to existing ones.
 © 2010 Microsoft Corporation. All rights reserved.
Was this page helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft