Export (0) Print
Expand All
Arp
At
Cls
Cmd
Fc
For
Ftp
If
Lpq
Lpr
Mmc
Rcp
Reg
Rem
Rsh
Rsm
SC
Set
Ver
Vol
Expand Minimize
3 out of 5 rated this helpful - Rate this topic

Ipxroute

Displays and modifies information about the routing tables used by the IPX protocol. Used without parameters, ipxroute displays the default settings for packets that are sent to unknown, broadcast, and multicast addresses.

Syntax

ipxroute servers [/type=x]

ipxroute ripout network

ipxroute resolve {guid | name} {guid | AdapterName}

ipxroute board= n [def] [gbr] [mbr] [remove=xxxxxxxxxxxx]

ipxroute config

Parameters

servers [ /type= x ] : Displays the Service Access Point (SAP) table for the specified server type. x must be an integer. For example, /type=4 displays all file servers. If you do not specify /type, ipxroute servers displays all types of servers, listing them by server name.

ripout   network   : Discovers if network is reachable by consulting the IPX stack's route table and sending out a rip request if necessary. Network is the IPX network segment number.

resolve { guid | name } { guid | AdapterName } : Resolves the name of the guid to its friendly name, or the friendly name to its guid.

board= n   : Specifies the network adapter for which to query or set parameters.

def   : Sends packets to the ALL ROUTES broadcast. If a packet is transmitted to a unique Media Access Card (MAC) address that is not in the source routing table, ipxroute sends the packet to the SINGLE ROUTES broadcast by default.

gbr   : Sends packets to the ALL ROUTES broadcast. If a packet is transmitted to the broadcast address (FFFFFFFFFFFF), ipxroute sends the packet to the SINGLE ROUTES broadcast by default.

mbr   : Sends packets to the ALL ROUTES broadcast. If a packet is transmitted to a multicast address (C000xxxxxxxx), ipxroute sends the packet to the SINGLE ROUTES broadcast by default.

remove= xxxxxxxxxxxx   : Removes the given node address from the source routing table.

config   : Displays information about all of the bindings for which IPX is configured.

/?   : Displays help at the command prompt.

Examples

To display the network segments that the workstation is attached to, the workstation node address, and frame type being used, type the following command:

ipxroute config

Formatting legend

Format

Meaning

Italic

Information that the user must supply

Bold

Elements that the user must type exactly as shown

Ellipsis (...)

Parameter that can be repeated several times in a command line

Between brackets ([])

Optional items

Between braces ({}); choices separated by pipe (|). Example: {even|odd}

Set of choices from which the user must choose only one

Courier font

Code or program output

Command-line reference A-Z

TCP/IP utilities and services

Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft. All rights reserved.