How to Upgrade a Single Copy Cluster to Exchange 2007 SP1 or SP2: Exchange 2007 Help

How to Upgrade a Single Copy Cluste...

Collapse All

How to Upgrade a Single Copy Cluster to Exchange 2007 SP1 or SP2

Applies to: Exchange Server 2007 SP2, Exchange Server 2007 SP1, Exchange Server 2007 Topic Last Modified: 2009-05-20

This topic explains how to use Setup.com to upgrade a clustered mailbox server in a single copy cluster (SCC) environment from the release to manufacturing (RTM) version of Microsoft Exchange Server 2007 to Microsoft Exchange Server 2007 Service Pack 1 (SP1) or Exchange 2007 Service Pack 2 (SP2). Clustered mailbox servers can be upgraded using only the command-line version of Setup. You can't use the graphical user interface (GUI) version of Setup (also known as the Exchange Server 2007 Setup wizard, or Setup.exe) to upgrade a clustered mailbox server.

This procedure should be used only to upgrade a clustered mailbox server in an SCC environment. For detailed steps about how to upgrade a clustered mailbox server in a cluster continuous replication (CCR) environment, see How to Upgrade a Clustered Mailbox Server in a CCR Environment to Exchange 2007 SP1 or SP2.

Before You Begin

We recommend that you make a complete backup of the clustered mailbox server prior to upgrading to Exchange 2007 SP1 or SP2 and again after successfully completing the upgrade to Exchange 2007 SP1 or SP2.

To perform these procedures, the account you use must be delegated the following:

Membership in the Exchange Server Administrator role
Local administrator permissions on all nodes in the cluster

For more information about permissions, delegating roles, and the rights that are required to administer Exchange 2007, see Permission Considerations.

Note:
Performing this procedure results in a brief outage during the upgrade process. Exchange Setup should be run only on the passive nodes in the cluster. All nodes need to be upgraded to Exchange 2007 SP1 or SP2 to be supported, but you must upgrade the nodes one at a time. After all nodes have been upgraded, the clustered mailbox server is upgraded, and then brought online.

The following procedure performs an upgrade of a two-node cluster. If your SCC has more than two nodes, Steps 12-15 will be repeated multiple times. In the following procedure, the designations for the active and passive nodes change. Therefore, for ease of reference in the following procedure, the original active node is NodeA and the original passive node is NodeB.

Procedure

To use Setup.com to upgrade a clustered mailbox server in an SCC environment to Exchange 2007 SP1 or SP2

Prepare NodeB to be upgraded by moving all cluster resource groups to NodeA. The clustered mailbox server can be left in an online (running) state during the first part of this procedure; however, during this procedure it will be taken offline and moved between nodes in the cluster. Perform Steps 2–11 on NodeB.
Stop any services that have open handles to performance counters. Known services that should be stopped include Performance Logs and Alerts and any Microsoft Operations Manager agents.
Stop, and then restart the Remote Registry service.
Open a Command Prompt window, and then navigate to the Exchange 2007 SP1 or SP2 installation files.
Run the following command:
```
Setup /m:upgrade
```
Setup performs Exchange 2007 SP1 or SP2 upgrade prerequisite checks and, after those are complete, Setup upgrades NodeB to Exchange 2007 SP1 or SP2.
Restart NodeB after Setup has completed the upgrade to Exchange 2007 SP1 or SP2.
After the restart process is complete, log on to NodeB and open the Exchange Management Shell.
Use the Stop-ClusteredMailboxServer cmdlet to stop the clustered mailbox server. For example, you can use the following command to stop a clustered mailbox server named EXCLUS1:
```
Stop-ClusteredMailboxServer EXCLUS1 -StopReason "Upgrade to SP2"
```
Use the Move-ClusteredMailboxServer cmdlet to move the clustered mailbox server from NodeA to NodeB. This cmdlet must be run from NodeB. For example, you can use the following command to move a clustered mailbox server named EXCLUS1 to NodeB:
```
Move-ClusteredMailboxServer EXCLUS1 -TargetMachine NODEB -MoveComment "Upgrade to SP2"
```
In a Command Prompt window, navigate to the Exchange 2007 SP1 or SP2 installation files.
Run the following command to upgrade the clustered mailbox server that is now owned by NodeB:
```
Setup /upgradecms
```
Setup performs the clustered mailbox server prerequisite checks and, after those are complete, Setup upgrades the clustered mailbox server and brings it online.
On NodeA, stop any services that have open handles to performance counters. Known services that should be stopped include Performance Logs and Alerts and any Microsoft Operations Manager agents.
Stop, and then restart the Remote Registry service.
Open a Command Prompt window, and then navigate to the Exchange 2007 SP1 or SP2 installation files. Run the following command on NodeA to upgrade it to Exchange 2007 SP1 or SP2:
```
Setup /m:upgrade
```
Setup performs Exchange 2007 SP1 or SP2 upgrade prerequisite checks and, after those are complete, Setup upgrades NodeA to Exchange 2007 SP1 or SP2.
Restart NodeA after Setup has completed the upgrade to Exchange 2007 SP1or SP2.

The clustered mailbox server has now been upgraded to Exchange 2007 SP1 or SP2.

During the upgrade procedure, ownership of the clustered mailbox server changed nodes. If you want, you can move the clustered mailbox server back to the original node. You can perform the move operation by using the Move-ClusteredMailboxServer cmdlet. You can also perform the move operation by using the new Manage Clustered Mailbox Server wizard in the Exchange Management Console, which is a feature of Exchange 2007 SP1 and SP2.

For More Information

For detailed steps about how to move a clustered mailbox server in an SCC environment using the Exchange Management Shell or the Exchange Management Console, see How to Move a Clustered Mailbox Server in a Single Copy Cluster.

For more information about the Move-ClusteredMailboxServer cmdlet, see Move-ClusteredMailboxServer. For more information about the Stop-ClusteredMailboxServer cmdlet, see Stop-ClusteredMailboxServer.

Tags

: Add a tag

Community Content

Add new content

Annotations

Installation Exchange 2007 SP1 to SCC

Emre AYDIN | Edit | Show History

This article has been prepared as basicly understandable

Exchange 2007 Cluster'a SP1 Yüklenmesi

http://mshowto.org/index.php/exchange-server/exchange-server-2007/438-exchange-2007-cluster-sp1-install

Tags

: 2007 (x) active (x) cluster (x) exchange (x) how (x) install (x) mailbox (x) node (x) passive (x) scc (x) sp1 (x) Add a tag

Flag as ContentBug

Help Me°°°

oarangog ... Green Lizard | Edit | Show History

I want to make a query, when I'm installing Exchange Server SP2 on the mailbox server and do the installation after the server restart, and stop the cluster service with the following command: Stop-ClusteredMailboxServer SRMDEVMS01-StopReason "Upgrade to SP2 "and then moved the database so with the following command: Move-ClusteredMailboxServer SRMDEVMS01-TargetMachine SRMDEMSG03-MoveComment" Upgrade to SP2, and all is well up to this point but when I try to run the last command to update the mailbox takes me a message box that tells me that: 'please go to the control panel to install and configure System Componets' and not to do it but nothing happens and the mailboxes are down I can say that I do to solve my problem many thanks.

Answer: Run the setup /m:upgrade command in a Command Prompt. This problem occurs if you are still in the Exchange Management Shell rather than using a Command Prompt; don't forget that you need to be in the direcotry where the Service Pack Setup files are located.

Tags

: 2007 (x) exchange (x) server (x) sp1 (x) sp2 (x) upgrade (x) Add a tag

Flag as ContentBug

Don't forget to disable your Exchange-level antivirus software

worldzfree | Edit | Show History

I would recommend unhooking your Exchange-level antivirus software. In the case of Forefront pull up a command prompt and navigate to the Forefront directory on all nodes and run a "FSCUtility /disable" before running the SP2 install. After everything is complete just do an "FSCUtility /enable" on all nodes.

Tags

: Add a tag

Flag as ContentBug