FW_H_S2SAddress

  • Article

To configure addresses for a remote site network

  1. In the console tree of ISA Server Management, click Virtual Private Networks (VPN).

  2. In the details pane, click the Remote Sites tab, and then select the applicable remote site network.

  3. On the Tasks tab, click Edit Selected Network.

  4. On the Addresses tab, click Add Range.

  5. In Start address, type the first address in the range. In End address, type the last address in the range.

  6. For ISA Server 2006 Enterprise Edition, to add an enterprise network, click Add Network, and then select the applicable enterprise networks.

Note

To open ISA Server Management, click Start, point to All Programs, point to Microsoft ISA Server, and then click ISA Server Management.
For ISA Server 2006 Enterprise Edition, expand Microsoft Internet Security and Acceleration Server 2006, expand Arrays, expand Array_Name, and then click Virtual Private Networks (VPN).
For ISA Server 2006 Standard Edition, expand Microsoft Internet Security and Acceleration Server 2006, expand Server_Name, and then click Virtual Private Networks (VPN).

Important

When you create a remote site network that uses the Internet Protocol security (IPsec) tunneling protocol, the Microsoft Firewall service modifies the IPsec filters on the computer, when restarting the Firewall service. This process can take up to several minutes, depending on the number of subnets included in the address ranges for the network. To minimize the effect, we recommend that you define IP address ranges that are aligned in subnet boundaries.