Export (0) Print
Expand All

FW_H_AddRemoteSite

To add a remote site network
  1. In the console tree of ISA Server Management, click Virtual Private Networks (VPN).

  2. In the details pane, click the Remote Sites tab.

  3. On the Tasks tab, click Create VPN Site-to-Site Connection.

  4. In the wizard, follow the on-screen instructions.

Bb794877.note(en-us,TechNet.10).gifNote:
To open ISA Server Management, click Start, point to All Programs, point to Microsoft ISA Server, and then click ISA Server Management.
For ISA Server 2006 Enterprise Edition, expand Microsoft Internet Security and Acceleration Server 2006, expand Arrays, expand Array_Name, and then click Virtual Private Networks (VPN).
For ISA Server 2006 Standard Edition, expand Microsoft Internet Security and Acceleration Server 2006, expand Server_Name, and then click Virtual Private Networks (VPN).
Bb794877.note(en-us,TechNet.10).gifImportant:
When you create a remote site network that uses the Internet Protocol security (IPsec) tunneling protocol, the Microsoft Firewall service modifies the IPsec filters on the computer, when restarting the Firewall service. This process can take up to several minutes, depending on the number of subnets included in the address ranges for the network. To minimize the effect, we recommend that you define IP address ranges that are aligned in subnet boundaries.
If you stop or restart the IPsec PolicyAgent service, all dynamic IPsec configuration information is lost, including ISA Server VPN site-to-site IPsec configuration settings, and VPN clients are disconnected. To restore settings, start the PolicyAgent service or restart the Firewall service.
A remote site network cannot share the same IP addresses as one of your other networks.
Was this page helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft