SREE_H_VPNLocalIP

  • Article

To configure local tunnel endpoint for IPsec networks (Enterprise Edition only)

  1. In the ISA Server Management console tree, expand Microsoft Internet Security and Acceleration Server 2006, expand Arrays, expand Array_Name, and then click Virtual Private Networks (VPN).

  2. In the details pane, click the Remote Sites tab, and then select the applicable remote network.

  3. On the Tasks tab, select Edit Selected Network.

  4. On the Connection tab, for IPsec networks, in Enter the local tunnel endpoint, type the IP address of the local VPN gateway.

Note

To open ISA Server Management, click Start, point to All Programs, point to Microsoft ISA Server, and then click ISA Server Management.

Important

If Network Load Balancing (NLB) is enabled on the network adapter used to connect to the remote site, use its virtual IP address as the local tunnel endpoint.