Export (0) Print
Expand All

Netsh Routing IPv6 Relayv6 Context Commands

Updated: June 3, 2009

Applies To: Windows Server 2008, Windows Server 2008 R2

The following commands are specific to the routing IPv6 relayv6 context within the Netsh environment.

To view the command syntax, click a command:

Add commands

Delete commands

Set commands

Show commands

  • The following entries provide details for each command.

Displays the Dynamic Host Configuration Protocol (DHCP) Relay Agent configuration of a remote access server in script form.

dump

  • You can dump the contents of the current configuration to a file that can be used to restore altered configuration settings.

The following commands save the current configuration as a script in the c:\test\ipv6relaycfg.dmp file.

  • From the command prompt:

    netsh routing ipv6 relayv6 dump > c:\test\ipv6relaycfg.dmp

  • From the netsh routing ipv6 relayv6 context prompt:

    set file open c:\test\ipv6relaycfg.dmp

    dump

    set file close

You can use the netsh exec command to run the script created by the netsh dump command.

Adds a DHCPv6 server to the list of DHCP servers whose messages will be forwarded by DHCPv6 Relay Agent.

add dhcpserver

server = ] IPv6Address

server = ] IPv6Address
Required. Specifies the global IPv6 address of a DHCPv6 server to add to the global list.

To add a DHCPv6 server with the IPv6 address of 3000:1234:1234:1234::1 to the global list of DHCPv6 servers, type:

add dhcpserver 3000:1234:1234:1234::1

Enables the DHCPv6 Relay Agent on the specified interface.

add interface

name = ] InterfaceName

name = ] InterfaceName
Required. Specifies, by name, the interface on which you want to enable the DHCPv6 Relay Agent. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name").

To enable the DHCPv6 Relay Agent on the “Local Area Connection” interface, type:

add interface "Local Area Connection"

Disables DHCPv6 Relay Agent on the specified interface.

delete interface

name = ] InterfaceName

name = ] InterfaceName
Required. Specifies, by name, the interface on which you want to disable the DHCPv6 Relay Agent. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name").

To disable the DHCPv6 Relay Agent on the “Local Area Connection” interface, type:

delete interface "Local Area Connection"

Removes a DHCPv6 server from the list of DHCPv6 servers whose messages will be forwarded by DHCPv6 Relay Agent.

delete dhcpserver

server = ] IPv6Address

server = ] IPv6Address
Required. Specifies, by IPv6 address, the DHCPv6 server to be removed from the global list.

To delete a DHCPv6 server with the IPv6 address of 3000:1234:1234:1234::1 from the global list of DHCPv6 servers, type:

delete dhcpserver 3000:1234:1234:1234::1

Sets global parameters for DHCPv6 Relay Agent configuration.

set global

loglevel = ] { none | error | warn | info }

loglevel = ] { none | error | warn | info }
Required. Specifies which DHCPv6 Relay Agent events should be logged.

  • none specifies that no events related to DHCPv6 Relay Agent should be logged.

  • error specifies that only errors related to DHCPv6 Relay Agent should be logged.

  • warn specifies that both errors and warnings related to DHCPv6 Relay Agent should be logged.

  • info specifies that all events related to DHCPv6 Relay Agent should be logged.

To configure global parameters for DHCPv6 Relay Agent to not log events, type:

set global loglevel=none

Modifies the DHCPv6 Relay Agent configuration on an interface.

set interface

name = ] InterfaceName

relaymode = ] { enable | disable }

[ [ maxhop = ] Integer ]

[ [ minsecs = ] Integer ]

name = ] InterfaceName
Required. Specifies, by name, the interface on which you want to modify the configuration of DHCPv6 Relay Agent. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name").

relaymode = ] { enable | disable }
Required. Specifies whether the DHCPv6 Relay Agent is enabled or disabled.

maxhop = ] Integer
Specifies the number of hops a DHCPv6 packet can make before it should be dropped and should no longer be relayed.

minsecs = ] Integer
Specifies the minimum number of seconds from boot time that must appear in a DHCPv6 packet before it should be sent to a DHCPv6 server in the list of servers whose messages will be forwarded by DHCPv6 Relay Agent.

To update the DHCPv6 Relay Agent configuration on the “Local Area Connection” interface with a maximum hop count of 16 and a value of 3200 seconds for the minimum seconds from boot time, type:

set interface name="Local Area Connection" enable 16 3200

Displays configuration information for the DHCPv6 Relay Agent on the specified interface. Used without parameters, show interface displays DHCPv6 Relay Agent configuration information for all interfaces.

show interface

name = ] InterfaceName

name = ] InterfaceName
Required. Specifies, by name, the interface for which you want to display information. The InterfaceName parameter must match the name of the interface as specified in Network Connections. If InterfaceName contains spaces, use quotation marks around the text (for example, "Interface Name").

Displays DHCPv6 Relay Agent global configuration.

show global

Installs the DHCPv6 Relay Agent under IPv6.

install

Removes the DHCPv6 Relay Agent component from under IPv6.

uninstall

Was this page helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft