Export (0) Print
Expand All
Expand Minimize

Server Properties - Security Tab - Authentication Methods - EAP Methods

Applies To: Windows Server 2008

PEAP

Protected Extensible Authentication Protocol (PEAP) is a new member of the family of Extensible Authentication Protocol (EAP) protocols. PEAP uses Transport Level Security (TLS) to create an encrypted channel between an authenticating PEAP client, such as a wireless computer, and a PEAP authenticator, such as a Network Policy Server (NPS) or Remote Authentication Dial-In User Service (RADIUS) server. PEAP does not specify an authentication method, but provides additional security for other EAP authentication protocols, such as EAP-MSCHAPv2, that can operate through the TLS encrypted channel provided by PEAP. PEAP is used as an authentication method for 802.11 wireless client computers, but is not supported for virtual private network (VPN) or other remote access clients.

To enhance both the EAP protocols and network security, PEAP provides:

  • Protection for the EAP method negotiation that occurs between client and server through a TLS channel. This helps prevent an attacker from injecting packets between the client and the network access server (NAS) to cause the negotiation of a less secure EAP method. The encrypted TLS channel also helps prevent denial of service attacks against the NPS server.

  • Support for the fragmentation and reassembly of messages, allowing the use of EAP types that do not provide this.

  • Wireless clients with the ability to authenticate the NPS or RADIUS server. Because the server also authenticates the client, mutual authentication occurs.

  • Protection against the deployment of an unauthorized wireless access point (WAP) when the EAP client authenticates the certificate provided by the NPS server. In addition, the TLS master secret created by the PEAP authenticator and client is not shared with the access point. Because of this, the access point cannot decrypt the messages protected by PEAP.

  • PEAP fast reconnect, which reduces the delay in time between an authentication request by a client and the response by the NPS or RADIUS server, and allows wireless clients to move between access points without repeated requests for authentication. This reduces resource requirements for both client and server.

noteNote

  • PEAP does not support guest authentication, which has a blank user name and password.

  • When you deploy both PEAP and EAP unprotected by PEAP, do not use the same EAP authentication type with and without PEAP. For example, if you deploy PEAP with EAP-TLS (PEAP-EAP-TLS), do not also deploy EAP-TLS without PEAP. Deploying authentication methods with the same type -- one with and the other without the protection of PEAP -- creates a security vulnerability.

Using smart cards for remote access

The use of smart cards for user authentication is the strongest form of authentication in the Windows Server® 2008 family. For remote access connections, you must use the Extensible Authentication Protocol (EAP) with the Smart card or other certificate (TLS) EAP type, also known as EAP-Transport Level Security (EAP-TLS). To use smart cards for remote access authentication, you must do the following:

  • Configure remote access on the remote access server.

  • Install a computer certificate on the remote access server computer.

  • Configure the Smart card or other certificate (TLS) EAP type in network policies.

  • Enable smart card authentication on the dial-up or VPN connection on the remote access client.

Was this page helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft