Adds specific types of objects to the directory. The dsadd commands include:

• dsadd computer
  
  
• dsadd contact
  
  
• dsadd group
  
  
• dsadd ou
  
  
• dsadd user
  
  
• dsadd quota
  
  

dsadd computer ComputerDN [-samid SAMName] [-desc Description] [-locLocation] [-memberof GroupDN ...] [{-s Server | -d Domain}] [-uUserName] [-p {Password | *}] [-q] [{-uc | -uco | -uci}]

ComputerDN

Required. Specifies the distinguished name of the computer you want to add. If the distinguished name is omitted, it will be taken from standard input (stdin).

-samid SAMName

Specifies to use the SAM name as the unique SAM account name for this computer (for example, TESTPC2$). If this parameter is not specified, then a SAM account name is derived from the value of the common name attribute used in ComputerDN.

-desc Description

Specifies the description of the computer you want to add.

-loc Location

Specifies the location of the computer you want to add.

-memberof GroupDN ...

Specifies the groups in which you want the computer as a member.

{-s Server | -d Domain}

Connects the computer to either a specified server or domain. By default, the computer is connected to the domain controller in the logon domain.

-u UserName

Specifies the user name with which the user logs on to a remote server. By default, -u uses the user name with which the user logged on. You can use any of the following formats to specify a user name:

• user name (for example, Linda)
  
  
• domain\user name (for example, widgets\Linda)
  
  
• user principal name (UPN) (for example, Linda@widgets.microsoft.com)
  
  

-p {Password| *}

Specifies to use either a password or a * to log on to a remote server. If you type *, you are prompted for a password.

-q

Suppresses all output to standard output (quiet mode).

{-uc | -uco | -uci}

Specifies that output or input data is formatted in Unicode. The following table lists and describes each format.

 

Value	Description
-uc	Specifies a Unicode format for input from or output to a pipe (|).
-uco	Specifies a Unicode format for output to a pipe (|) or a file.
-uci	Specifies a Unicode format for input from a pipe (|) or a file.

/?

Displays help at the command prompt.

• If you do not supply a target object at the command prompt, the target object is obtained from standard input (stdin). Stdin data can be accepted from the keyboard, a redirected file, or as piped output from another command. To mark the end of stdin data from the keyboard or in a redirected file, use the end-of-file character (CTRL+Z).
  
  
• If a value that you supply contains spaces, use quotation marks around the text (for example, "CN=DC 2,OU=Domain Controllers,DC=Microsoft,DC=Com").
  
  
• If you supply multiple values for a parameter, use spaces to separate the values (for example, a list of distinguished names).
  
  

To create a computer account named WorkstationA in the default Computers container of fabrikam.com, at a command prompt, type the following command, and then press ENTER:

dsadd computer cn=WorkstationA,cn=computers,dc=fabrikam,dc=com

To create a computer account named WorkstationB in a top-level OU named Service Dept in the same domain, at a command prompt, type the following command, and then press ENTER:

dsadd computer "cn=WorkstationB,ou=service dept,dc=fabrikam,dc=com"

dsadd contact ContactDN [-fn FirstName] [-mi Initial] [-ln LastName] [-display DisplayName] [-desc Description] [-office Office] [-tel PhoneNumber] [-email Email] [-hometel HomePhoneNumber] [-pager PagerNumber] [-mobile CellPhoneNumber] [-fax FaxNumber] [-iptel IPPhoneNumber] [-title Title] [-dept Department] [-company Company] [{-s Server | -d Domain}] [-u UserName] [-p {Password | *}] [-q] [{-uc | -uco | -uci}]

ContactDN

Required. Specifies the distinguished name of the contact you want to add. If the distinguished name is omitted, it will be taken from standard input (stdin).

-fn FirstName

Specifies the first name of the contact you want to add.

-mi Initial

Specifies the middle initial of the contact you want to add.

-ln LastName

Specifies the last name of the contact you want to add.

-display DisplayName

Specifies the display name of the contact you want to add.

-desc Description

Specifies the description of the contact you want to add.

-office Office

Specifies the office location of the contact you want to add.

-tel PhoneNumber

Specifies the telephone number of the contact you want to add.

-email Email

Specifies the e-mail address of the contact you want to add.

-hometel HomePhoneNumber

Specifies the home telephone number of the contact you want to add.

-pager PagerNumber

Specifies the pager number of the contact you want to add.

-mobile CellPhoneNumber

Specifies the mobile phone number of the contact you want to add.

-fax FaxNumber

Specifies the fax number of the contact you want to add.

-iptel IPPhoneNumber

Specifies the IP phone number of the contact you want to add.

-title Title

Specifies the title of the contact you want to add.

-dept Department

Specifies the department of the contact you want to add.

-company Company

Specifies the company information for the contact you want to add.

{-s Server | -d Domain}

Connects to a specified remote server or domain. By default, the computer is connected to the domain controller in the logon domain.

-u UserName

Specifies the user name with which the user logs on to a remote server. By default, the logged on user name is used. You can specify a user name using one of the following formats:

• user name (for example, Linda)
  
  
• domain\user name (for example, widgets\Linda)
  
  
• user principal name (UPN) (for example, Linda@widgets.microsoft.com)
  
  

-p {Password | *}

Specifies to use either a password or a * to log on to a remote server. If you type *, you are prompted for a password.

-q

Suppresses all output to standard output (quiet mode).

{-uc | -uco | -uci}

Specifies that output or input data is formatted in Unicode. The following table lists and describes each format.

 

Value	Description
-uc	Specifies a Unicode format for input from or output to a pipe (|).
-uco	Specifies a Unicode format for output to a pipe (|) or a file.
-uci	Specifies a Unicode format for input from a pipe (|) or a file.

/?

Displays help at the command prompt.

• If you do not supply a target object at the command prompt, the target object is obtained from standard input (stdin). Stdin data can be accepted from the keyboard, a redirected file, or as piped output from another command. To mark the end of stdin data from the keyboard or in a redirected file, use the end-of-file character (CTRL+Z).
  
  
• If the value that you supply contains spaces, use quotation marks around the text (for example, "CN=Mike Danseglio,CN=Users,DC=Microsoft,DC=Com").
  
  
• This command only supports a subset of commonly used object class attributes.
  
  

To create a contact named Jeff Hay in a top-level OU named Service Dept in the fabrikam.com domain, at a command prompt, type the following command, and then press ENTER:

dsadd contact "cn=Jeff Hay,ou=service dept,dc=fabrikam,dc=com"

To create a contact named Jun Cao in the default users container, at a command prompt, type the following command, and then press ENTER:

dsadd contact "cn=Jun Cao,cn=users,dc=fabrikam,dc=com"

dsadd group GroupDN [-secgrp {yes | no}] [-scope {l | g | u}] [-samid SAMName] [-desc Description] [-memberof Group ...] [-members Member ...] [{-s Server | -d Domain}] [-u UserName] [-p {Password | *}] [-q] [{-uc | -uco | -uci}]

GroupDN

Required. Specifies the distinguished name of the group you want to add. If the distinguished name is omitted, it will be taken from standard input (stdin).

-secgrp {yes | no}

Specifies whether the group you want to add is a security group (yes) or a distribution group (no). By default, the group is added as a security group (yes).

-scope {l | g | u}

Specifies whether the scope of the group you want to add is domain local (l), global (g), or universal (u). If the domain is in mixed-mode, then the universal scope is not supported. By default, the scope of the group is set to global.

-samid SAMName

Specifies to use the SAM name as the unique SAM account name for this group (for example, operators). If this parameter is not specified, it is generated from the relative distinguished name.

-desc Description

Specifies the description of the group you want to add.

-memberof Group ...

Specifies the groups to which this new group should be added.

-members Member ...

Specifies the members to add to the new group.

{-s Server | -d Domain}

Connects to a specified remote server or domain. By default, the computer is connected to the domain controller in the logon domain.

-u UserName

Specifies the user name with which the user logs on to a remote server. By default, -u uses the user name with which the user logged on. You can use any of the following formats to specify a user name:

• user name (for example, Linda)
  
  
• domain\user name (for example, widgets\Linda)
  
  
• user principal name (UPN) (for example, Linda@widgets.microsoft.com)
  
  

-p {Password | *}

Specifies to use either a password or a * to log on to a remote server. If you type *, you are prompted for a password.

-q

Suppresses all output to standard output (quiet mode).

{-uc | -uco| -uci}

Specifies that output or input data is formatted in Unicode. The following table lists and describes each format.

 

Value	Description
-uc	Specifies a Unicode format for input from or output to a pipe (|).
-uco	Specifies a Unicode format for output to a pipe (|) or a file.
-uci	Specifies a Unicode format for input from a pipe (|) or a file.

/?

Displays help at the command prompt.

• If you do not supply a target object at the command prompt, the target object is obtained from standard input (stdin). Stdin data can be accepted from the keyboard, a redirected file, or as piped output from another command. To mark the end of stdin data from the keyboard or in a redirected file, use the end-of-file character (CTRL+Z).
  
  
• If a value that you supply contains spaces, use quotation marks around the text (for example, "CN=Mike Danseglio,CN=Users,DC=Microsoft,DC=Com").
  
  
• If you supply multiple values for a parameter, use spaces to separate the values (for example, a list of distinguished names).
  
  
• This command only supports a subset of commonly used object class attributes.
  
  

To create a group account named Techs in an OU named Repairs, which is subordinate to the top-level OU Service Dept of the domain fabrikam.com, at a command prompt, type the following command, and then press ENTER:

dsadd group "cn=Techs,ou=Repairs,ou=Service Dept,dc=fabrikam,dc=com"

To create a group account named Support in the default Users container of fabrikam.com, at a command prompt, type the following command, and then press ENTER:

dsadd group cn=Support,cn=Users,dc=fabrikam,dc=com

dsadd ou OrganizationalUnitDN [-desc Description] [{-s Server | -d Domain}][-u UserName] [-p {Password | *}] [-q] [{-uc | -uco | -uci}]

OrganizationalUnitDN

Required. Specifies the distinguished name of the organizational unit you want to add. If the distinguished name is omitted, it will be taken from standard input (stdin).

-desc Description

Specifies the description of the organizational unit you want to add.

{-s Server | -d Domain}

Connects to a specified remote server or domain. By default, the computer is connected to the domain controller in the logon domain.

-u UserName

Specifies the user name with which the user logs on to a remote server. By default, the logged on user name is used. You can specify a user name using one of the following formats:

• user name (for example, Linda)
  
  
• domain\user name (for example, widgets\Linda)
  
  
• user principal name (UPN) (for example, Linda@widgets.microsoft.com)
  
  

-p {Password | *}

Specifies to use either a password or a * to log on to a remote server. If you type *, you are prompted for a password.

-q

Suppresses all output to standard output (quiet mode).

{-uc | -uco | -uci}

Specifies that output or input data is formatted in Unicode. The following table lists and describes each format.

 

Value	Description
-uc	Specifies a Unicode format for input from or output to a pipe (|).
-uco	Specifies a Unicode format for output to a pipe (|) or a file.
-uci	Specifies a Unicode format for input from a pipe (|) or a file.

/?

Displays help at the command prompt.

• If you do not supply a target object at the command prompt, the target object is obtained from standard input (stdin). Stdin data can be accepted from the keyboard, a redirected file, or as piped output from another command. To mark the end of stdin data from the keyboard or in a redirected file, use the end-of-file character (CTRL+Z).
  
  
• If a value that you supply contains spaces, use quotation marks around the text (for example, "OU=Domain Controllers,DC=Microsoft,DC=Com").
  
  
• This command only supports a subset of commonly used object class attributes.
  
  

To create an OU named Service Dept in a domain named fabrikam.com, at a command prompt, type the following command, and then press ENTER:

dsadd ou "ou=Service Dept,dc=fabrikam,dc=com"

To create an OU subordinate to the Service Dept named Repairs, at a command prompt, type the following command, and then press ENTER:

dsadd ou "ou=Repairs,ou=Service Dept,dc=fabrikam,dc=com"

dsadd user UserDN [-samid SAMName] [-upn UPN] [-fn FirstName] [-mi Initial] [-ln LastName] [-display DisplayName] [-empid EmployeeID] [-pwd {Password | *}] [-desc Description] [-memberof Group ...] [-office Office] [-tel PhoneNumber] [-email Email] [-hometel HomePhoneNumber] [-pager PagerNumber] [-mobile CellPhoneNumber] [-fax FaxNumber] [-iptel IPPhoneNumber] [-webpg WebPage] [-title Title] [-dept Department] [-company Company] [-mgr Manager] [-hmdir HomeDirectory] [-hmdrv DriveLetter:][-profile ProfilePath] [-loscr ScriptPath] [-mustchpwd {yes | no}] [-canchpwd {yes | no}] [-reversiblepwd {yes | no}] [-pwdneverexpires {yes | no}] [-acctexpires NumberOfDays] [-disabled {yes | no}] [{-s Server | -d Domain}] [-u UserName] [-p {Password | *}] [-q] [{-uc | -uco | -uci}]

UserDN

Required. Specifies the distinguished name of the user you want to add. If the distinguished name is omitted, it will be taken from standard input (stdin).

-samid SAMName

Specifies the SAM name as the unique SAM account name for this user (for example, Linda). If not specified, dsadd will attempt to create SAM account name using up to the first 20 characters from the common name (CN) value of UserDN.

-upn UPN

Specifies the user principal name of the user you want to add, (for example, Linda@widgets.microsoft.com).

-fn FirstName

Specifies the first name of the user you want to add.

-mi Initial

Specifies the middle initial of the user you want to add.

-ln LastName

Specifies the last name of the user you want to add.

-display DisplayName

Specifies the display name of the user you want to add.

-empid EmployeeID

Specifies the employee ID of the user you want to add.

-pwd {Password| *}

Specifies the password for the user to be set to Password or *. If set to *, you are prompted for a user password.

-desc Description

Specifies the description of the user you want to add.

-memberof GroupDN ...

Specifies the distinguished names of the groups in which you want the user to be a member.

-office Office

Specifies the office location of the user you want to add.

-tel PhoneNumber

Specifies the telephone number of the user you want to add.

-email Email

Specifies the e-mail address of the user you want to add.

-hometel HomePhoneNumber

Specifies the home telephone number of the user you want to add.

-pager PagerNumber

Specifies the pager number of the user you want to add.

-mobile CellPhoneNumber

Specifies the cell phone number of the user you want to add.

-fax FaxNumber

Specifies the fax number of the user you want to add.

-iptel IPPhoneNumber

Specifies the IP phone number of the user you want to add.

-webpg WebPage

Specifies the Web page URL of the user you want to add.

-title Title

Specifies the title of the user you want to add.

-dept Department

Specifies the department of the user you want to add.

-company Company

Specifies the company information of the user you want to add.

-mgr ManagerDN

Specifies the distinguished name of the manager of the user you want to add.

-hmdir HomeDirectory

Specifies the home directory location of the user you want to add. If HomeDirectory is given as a Universal Naming Convention (UNC) path, then you must specify a drive letter to be mapped to this path using the -hmdrv parameter.

-hmdrv DriveLetter :

Specifies the home directory drive letter (for example, E:) of the user you want to add..

-profile ProfilePath

Specifies the profile path of the user you want to add.

-loscr ScriptPath

Specifies the logon script path of the user you want to add.

-mustchpwd {yes | no}

Specifies if users must change their passwords at the time of next logon (yes) or not (no). By default, the user does not need to change the password (no).

-canchpwd {yes | no}

Specifies if users can change their passwords at all (yes) or not (no). By default, the user is allowed to change the password (yes). The value of this parameter must be yes if the value of the -mustchpwd parameter is yes.

-reversiblepwd {yes | no}

Specifies if the user password should be stored using reversible encryption (yes) or not (no). By default, the user cannot use reversible encryption (no).

-pwdneverexpires {yes | no}

Specifies if the user password never expires (yes) or not (no). By default, the user password does expire (no).

-acctexpires NumberOfDays

Specifies the number of days from today that the user account will expire. A value of 0 sets expiration at the end of today. A positive value sets expiration in the future. A negative value sets expiration in the past. The value never sets the account to never expire. For example, a value of 0 implies that the account expires at the end of today. A value of -5 implies that the account has already expired 5 days ago and sets an expiration date in the past. A value of 5 sets the account expiration date for 5 days in the future.

-disabled {yes | no}

Specifies if the user account is disabled for log on (yes) or enabled (no). For example, the command dsadd user CN=Nicolettep,CN=Users,DC=Widgets,DC=Microsoft,DC=Com -pwd Password1 -disabled no creates a Nicolettep user account in an enabled state. By default, the user account is disabled for log on (yes). For example, the command dsadd user CN=Nathanp,CN=Users,DC=Widgets,DC=Microsoft,DC=Com creates a Nathanp user account in a disabled state.

{-s Server | -d Domain}

Connects to a specified remote server or domain. By default, the computer is connected to the domain controller in the logon domain.

-u UserName

Specifies the user name with which the user logs on to a remote server. By default, -u uses the user name with which the user logged on. You can use any of the following formats to specify a user name:

• user name (for example, Linda)
  
  
• domain\user name (for example, widgets\Linda)
  
  
• user principal name (UPN) (for example, Linda@widgets.microsoft.com)
  
  

-p {Password | *}

Specifies to use either a password or a * to log on to a remote server. If you type *, you are prompted for a password.

-q

Suppresses all output to standard output (quiet mode).

{-uc | -uco | -uci}

Specifies that output or input data is formatted in Unicode. The following table lists and describes each format.

 

Value	Description
-uc	Specifies a Unicode format for input from or output to a pipe (|).
-uco	Specifies a Unicode format for output to a pipe (|) or a file.
-uci	Specifies a Unicode format for input from a pipe (|) or a file.

/?

Displays help at the command prompt.

• If you do not supply a target object at the command prompt, the target object is obtained from standard input (stdin). Stdin data can be accepted from the keyboard, a redirected file, or as piped output from another command. To mark the end of stdin data from the keyboard or in a redirected file, use the end-of-file character (CTRL+Z).
  
  
• If a value that you supply contains spaces, use quotation marks around the text (for example, "CN=Mike Danseglio,CN=Users,DC=Microsoft,DC=Com").
  
  
• If you supply multiple values for a parameter, use spaces to separate the values (for example, a list of distinguished names).
  
  
• The special token $username$ (case insensitive) may replace the SAM account name in the value of the -email, -hmdir, -profile, and -webpg parameters. For example, if a SAM account name is "Denise," the -hmdir parameter can be written in either of the following formats:
  
  -hmdir\users\Denise\home
  
  -hmdir\users\$username$\home
  
  
• Using strong passwords on all user accounts can help minimize security risks. For more information about strong passwords, see Related Topics.
  
  

To create a disabled user account named OCox in the top-level OU named Service Dept in the fabrikam.com domain, at a command prompt, type the following command, and then press ENTER:

dsadd user cn=OCox,ou=Service Dept,dc=fabrikam,dc=com -disabled yes

To create a user account named ACon with a password of $erVice41 in the default users container of the same domain, at a command prompt, type the following command, and then press ENTER:

Dsadd user "cn=ACon,cn=users,dc=fabrikam,dc=com" -pwd $erVice41

dsadd quota -part PartitionDN [-rdn RelativeDistinguishedName] -acct Name -qlimit Value [-desc Description] [{-s Server | -d Domain}] [-u UserName][-p {Password | *}] [-q] [{-uc | -uco | -uci}]

-part PartitionDN

Required. Specifies the distinguished name of the directory partition on which you want to create a quota. If you do not specify the distinguished name, it is taken from standard input (stdin).

-rdn RelativeDistinguishedName

Specifies the relative distinguished name of the quota specification being created. If you do not specify -rdn, it is set to Domain_AccountName, using the domain and account name of the security principal specified by the -acct parameter.

-acct Name

Required. Specifies the security principal (user, group, computer, or InetOrgPerson) to whom the quota specification applies. You can use any of the following forms for Name:

• Distinguished name (also known as DN) of the security principal
  
  
• Domain\SAMAccountName of the security principal
  
  

-qlimit Value

Required. Specifies the number of objects within the directory partition that can be owned by the security principal. To specify an unlimited quota, use -1.

-desc Description

Specifies a description for the quota specification that you want to add.

{-s Server | -d Domain}

Connects the computer to either a specified server or domain. By default, the computer is connected to a domain controller in the logon domain.

-u UserName

Specifies the user name with which user will log on to a remote server. By default, -u uses the user name with which the user logged on. You can use any of the following formats to specify a user name:

• user name (for example, Linda)
  
  
• domain\user name (for example, widgets\Linda)
  
  
• user principal name (UPN) (for example, Linda@widgets.microsoft.com)
  
  

-p {Password| *}

Specifies use of a specific password or a * to log on to a remote server. If you type *, you are prompted for a password.

-q

Suppresses all output to standard output (quiet mode).

{-uc | -uco | -uci}

Specifies that output or input data is formatted in Unicode. The following table lists and describes each format.

 

Value	Description
-uc	Specifies a Unicode format for input from or output to a pipe (|).
-uco	Specifies a Unicode format for output to a pipe (|) or a file.
-uci	Specifies a Unicode format for input from a pipe (|) or a file.

/?

Displays help at the command prompt.

• If you do not specify a target object at the command prompt, the target object is obtained from standard input (stdin). Stdin data can be accepted from the keyboard, a redirected file, or as piped output from another command. To mark the end of stdin data from the keyboard or in a redirected file, use CTRL+Z for End of File (EOF).
  
  
• If a value that you use contains spaces, use quotation marks around the text (for example, "CN=DC 2,OU=Domain Controllers,DC=Microsoft,DC=Com").
  
  

To specify a quota of 1000 objects for the configuration partition for user account AConn, which is in the default Users container of the fabrikam.com domain, at a command prompt, type the following command, and then press ENTER:

dsadd quota -part cn=configuration,dc=fabrikam,dc=com -acct cn=aconn,cn=users,dc=fabrikam,dc=com

Concepts