Export (0) Print
Expand All

IPv6 Address Types

Updated: March 28, 2003

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

IPv6 has three types of addresses, which can be categorized by type and scope:

  • Unicast addresses. A packet is delivered to one interface.

  • Multicast addresses. A packet is delivered to multiple interfaces.

  • Anycast addresses. A packet is delivered to the nearest of multiple interfaces (in terms of routing distance).

IPv6 does not use broadcast messages.

Unicast and anycast addresses in IPv6 have the following scopes (for multicast addresses, the scope is built into the address structure):

  • Link-local. The scope is the local link (nodes on the same subnet).

  • Site-local. The scope is the organization (private site addressing).

  • Global. The scope is global (IPv6 Internet addresses).

In addition, IPv6 has special addresses such as the loopback address. The scope of a special address depends on the type of special address.

Much of the IPv6 address space is unassigned.

Unicast IPv6 Addresses

IPv6 has several major unicast address types.

Unicast global addresses

IPv6 unicast global addresses are similar to IPv4 public addresses. Also known as aggregatable global unicast addresses, global addresses are globally routable. The structure of an IPv6 unicast global address creates the three-level topology shown in the following illustration.

Unicast global addresses

Table 1.7 explains each field in a unicast global address.

Table 1.7   Fields in a Unicast Global Address

 

Field Description

001

Identifies the address as an IPv6 unicast global address.

Top Level Aggregation Identifier (TLA ID)

Identifies the highest level in the routing hierarchy. TLA IDs are administered by IANA, which allocates them to local Internet registries, which then allocate a given TLA ID to a global ISP.

Res

Reserved for future use (to expand either the TLA ID or the NLA ID).

Next Level Aggregation Identifier (NLA ID)

Identifies a specific customer site.

Site Level Aggregation Identifier (SLA ID)

Enables as many as 65,536 (216) subnets within an individual organization’s site. The SLA ID is assigned within the site; an ISP cannot change this part of the address.

Interface ID

Identifies the interface of a node on a specific subnet.

Unicast site-local addresses

IPv6 unicast site-local addresses are similar to IPv4 private addresses. The scope of a site-local address is the internetwork of an organization’s site. (You can use both global addresses and site-local addresses in your network.) The prefix for site-local addresses is FEC0::/48.

The following illustration shows the structure of a site-local address.

Unicast site-local addresses

The initial 48 fixed bits are followed by a 16-bit Subnet ID field, which provides as many as 65,536 subnets in a flat subnet structure. Alternatively, you can subdivide the high-order bits of the Subnet ID field to create a hierarchical routing infrastructure. The last field is a 64-bit Interface ID field that identifies the interface of a node on a specific subnet.

Note

  • Global addresses and site-local addresses share the same structure after the first 48 bits — the 16-bit SLA ID of a global address and the 16-bit Subnet ID of a site-local address both identify the subnets of an organization’s site. Because of this, you can assign a specific subnet number to identify a subnet that is used for both global and site-local unicast addresses.

Unicast link-local addresses (FE80::/64)

IPv6 unicast link-local addresses are similar to IPv4 APIPA addresses used by computers running Microsoft Windows. Hosts on the same link (the same subnet) use these automatically configured addresses to communicate with each other. Neighbor Discovery provides address resolution. The prefix for link-local addresses is FE80::/64. The following illustration shows the structure of a link-local address.

Unicast link-local addresses (FE80::/64)

Unicast unspecified address

The IPv6 unicast unspecified address is equivalent to the IPv4 unspecified address of 0.0.0.0. The IPv6 unspecified address is 0:0:0:0:0:0:0:0:, or a double colon (::).

Unicast loopback address

The IPv6 unicast loopback address is equivalent to the IPv4 loopback address, 127.0.0.1. The IPv6 loopback address is 0:0:0:0:0:0:0:1, or ::1.

Unicast 6to4 addresses (2002::/16)

IPv6 uses 6to4 addresses to communicate between two IPv6/IPv4 nodes over the IPv4 Internet. A 6to4 address combines the prefix 2002::/16 with the 32 bits of the public IPv4 address of the node to create a 48-bit prefix — 2002:WWXX:YYZZ::/48, where WWXX:YYZZ is the colon-hexadecimal representation of w.x.y.z, a public IPv4 address. Therefore, the IPv4 address 157.60.91.123 translates into a 6to4 address prefix of 2002:9D3C:5B7B::/48.

The following illustration shows the structure of a 6to4 address.

Unicast 6to4 addresses (2002::/16)

However, this is often written using the hexadecimal prefix: 2002:WWXX:YYZZ:SLA ID:Interface ID.

The following example shows how the WWXX:YYZZ portion of the address is translated from colon-hexadecimal notation to dotted-decimal notation. In this example, 9D3C:5B7B translates to 157.60.91.123, as illustrated in the following example.

 

Notation Type Use a calculator to convert each constituent number from one notation type to the other

Colon-hexadecimal

9D     3C    5B    7B

Dotted-decimal

157    60     91    123

For more information about 6to4 tunneling, see "Routing IPv6 Traffic over an IPv4 Infrastructure" later in this chapter.

Unicast ISATAP addresses

IPv6 uses ISATAP addresses to communicate between two IPv6/IPv4 nodes over an IPv4 intranet. An ISATAP address combines a 64-bit unicast link-local, site-local, or global prefix (a global prefix might be a 6 to 4 prefix) with a 64-bit suffix constructed of the ISATAP identifier 0:5EFE, followed by the IPv4 address assigned to an interface of the host. The prefix is known as the subnet prefix. Although a 6to4 address can incorporate only a public IPv4 address, an ISATAP address can incorporate either a public or a private IPv4 address.

The following illustration shows the structure of an ISATAP address.

Unicast ISATAP addresses

Table 1.8 shows an example of each type of ISATAP address.

Table 1.8   Examples of ISATAP addresses

 

Type of ISATAP Address ISATAP Address

With link-local prefix

FE80::5EFE:131.107.129.8*

With site-local prefix

FEC0::1111:0:5EFE:131.107.129.8*

With global prefix

3FFE:1A05:510:1111:0:5EFE:131.107.129.8*

With global 6to4 prefix

2002:9D36:1:2:0:5EFE:131.107.129.8*

*Alternatively, the IPv4 address (in this example, 131.107.129.8) can be written in hexadecimal (in this example, 836B:8108).

By default, the IPv6 protocol for Windows XP and members of Windows Server 2003 automatically configures the ISATAP address of FE80::5EFE:w.x.y.z for each IPv4 address that is assigned to the node. This link-local ISATAP address allows two hosts to communicate over an IPv4 network by using each other’s ISATAP address.

For more information about ISATAP tunneling, see "Routing IPv6 Traffic over an IPv4 Infrastructure" later in this chapter.

Multicast IPv6 Addresses

IPv6 multicast addresses are similar to IPv4 multicast addresses. Packets addressed to a multicast address are delivered to all interfaces that the address identifies.

The following illustration shows the structure of an IPv6 multicast address.

Multicast IPv6 Addresses

Table 1.9 explains each field in an IP multicast address. The prefix for multicast addresses is FF00::/8.

Table 1.9   Fields in a Multicast Address

 

Field Description

1111 1111

Identifies the address as an IP multicast address.

Flags

Currently, the only defined flag is the Transient (T) flag. Set to zero, the T flag identifies the address as a permanently assigned multicast address. Set to 1, it identifies a transient address.

Scope

Indicates the scope of the multicast traffic, such as interface-local, link-local, site-local, organization-local, or global scope.

Group ID

identifies the multicast group.

Multicast solicited node address

The IPv6 multicast solicited node address is used for efficient address resolution. The IPv4 ARP Request frame is sent to the MAC-level broadcast, which disturbs all nodes on the network segment. The multicast solicited node address combines the prefix FF02::1:FF00:0/104 with the last 24 bits of the IPv6 address being resolved. IPv6 uses the solicited node multicast address for the Neighbor Solicitation message (the IPv6 equivalent to the ARP Request frame) that resolves an IPv6 address to its link-layer address, disturbing few nodes during the address resolution process.

Anycast IPv6 Addresses

Anycast IPv6 addresses are similar to but more efficient than the anycast addresses in IPv4, which are used primarily by large ISPs. Anycast addresses use the unicast address space but function differently from other unicast addresses. IPv6 uses anycast addresses to identify multiple interfaces. IPv6 delivers packets addressed to an anycast address to the nearest interface that the address identifies. In contrast to a multicast address, where delivery is from one to many, an anycast address delivery is from one to one-of-many. Currently, anycast addresses are assigned only to routers and are used only as destination addresses.

Was this page helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft