Dnscmd

 

Applies To: Windows Server 2003, Windows Server 2008, Windows Server 2003 R2, Windows Server 2008 R2, Windows Server 2012, Windows Server 2003 with SP1, Windows 8

A command-line interface for managing DNS servers. This utility is useful in scripting batch files to help automate routine DNS management tasks, or to perform simple unattended setup and configuration of new DNS servers on your network.

Syntax

dnscmd <ServerName> <command> [<command parameters>]

Parameters

Parameter

Description

<ServerName>

The IP address or host name of a remote or local DNS server.

Commands

Command

Description

dnscmd /ageallrecords

Sets the current time on all time stamps in a zone or node.

dnscmd /clearcache

Clears the DNS server cache.

dnscmd /config

Resets the DNS server or zone configuration.

dnscmd /createbuiltindirectorypartitions

Creates the built-in DNS application directory partitions.

dnscmd /createdirectorypartition

Creates a DNS application directory partition.

dnscmd /deletedirectorypartition

Deletes a DNS application directory partition.

dnscmd /directorypartitioninfo

Lists information about a DNS application directory partition.

dnscmd /enlistdirectorypartition

Adds a DNS server to the replication set of a DNS application directory partition.

dnscmd /enumdirectorypartitions

Lists the DNS application directory partitions for a server.

dnscmd /enumrecords

Lists the resource records in a zone.

dnscmd /enumzones

Lists the zones hosted by the specified server.

dnscmd /exportsettings

Writes server configuration information to a text file.

dnscmd /info

Gets server information.

dnscmd /ipvalidate

Validates remote DNS servers.

dnscmd /nodedelete

Deletes all records for a node in a zone.

dnscmd /recordadd

Adds a resource record to a zone.

dnscmd /recorddelete

Removes a resource record from a zone.

dnscmd /resetforwarders

Sets DNS servers to forward recursive queries.

dnscmd /resetlistenaddresses

Sets server IP addresses to serve DNS requests.

dnscmd /startscavenging

Initiates server scavenging.

dnscmd /statistics

Queries or clears server statistics data.

dnscmd /unenlistdirectorypartition

Removes a DNS server from the replication set of a DNS application directory partition.

dnscmd /writebackfiles

Saves all zone or root-hint data to a file.

dnscmd /zoneadd

Creates a new zone on the DNS server.

dnscmd /zonechangedirectorypartition

Changes the directory partition on which a zone resides.

dnscmd /zonedelete

Deletes a zone from the DNS server.

dnscmd /zoneexport

Writes the resource records of a zone to a text file.

dnscmd /zoneinfo

Displays zone information.

dnscmd /zonepause

Pauses a zone.

dnscmd /zoneprint

Displays all records in the zone.

dnscmd /zonerefresh

Forces a refresh of the secondary zone from the master zone.

dnscmd /zonereload

Reloads a zone from its database.

dnscmd /zoneresetmasters

Changes the master servers that provide zone transfer information to a secondary zone.

dnscmd /zoneresetscavengeservers

Changes the servers that can scavenge a zone.

dnscmd /zoneresetsecondaries

Resets secondary information for a zone.

dnscmd /zoneresettype

Changes the zone type.

dnscmd /zoneresume

Resumes a zone.

dnscmd /zoneupdatefromds

Updates an Active Directory–integrated zone with data from Active Directory Domain Services (AD DS).

dnscmd /zonewriteback

Saves zone data to a file.

dnscmd /ageallrecords

Sets the current time on a time stamp on resource records at a specified zone or node on a DNS server.

Syntax

dnscmd [<ServerName>] /ageallrecords <ZoneName>[<NodeName>] | [/tree]|[/f]

Parameters

  • <ServerName>
    Specifies the DNS server that the administrator plans to manage, represented by IP address, fully qualified domain name (FQDN), or Host name. If this parameter is omitted, the local server is used.

  • <ZoneName>
    Specifies the FQDN of the zone.

  • <NodeName>
    Specifies a specific node or subtree in the zone. NodeName specifies the node or subtree in the zone using the following:

    • @ for root zone or FQDN

    • The FQDN of a node (the name with a period (.) at the end)

    • A single label for the name relative to the zone root

  • /tree
    Specifies that all child nodes also receive the time stamp.

  • /f
    Runs the command without asking for confirmation.

Remarks

  • The ageallrecords command is for backward compatibility between the current version of DNS and previous releases of DNS in which aging and scavenging were not supported. It adds a time stamp with the current time to resource records that do not have a time stamp, and it sets the current time on resource records that do have a time stamp.

  • Record scavenging does not occur unless the records are time stamped. Name server (NS) resource records, start of authority (SOA) resource records, and Windows Internet Name Service (WINS) resource records are not included in the scavenging process, and they are not time stamped even when the ageallrecords command runs.

  • This command fails unless scavenging is enabled for the DNS server and the zone. For information about how to enable scavenging for the zone, see the aging parameter under “Zone-Level Syntax” in the dnscmd /config command.

  • The addition of a time stamp to DNS resource records makes them incompatible with DNS servers that run on operating systems other than Windows 2000, Windows XP, or Windows Server 2003. A time stamp that you add by using the ageallrecords command cannot be reversed.

  • If none of the optional parameters are specified, the command returns all resource records at the specified node. If a value is specified for at least one of the optional parameters, dnscmd enumerates only the resource records that correspond to the value or values that are specified in the optional parameter or parameters.

Example

See Example 1: Set the current time on a time stamp to resource records.

dnscmd /clearcache

Clears the DNS cache memory of resource records on the specified DNS server.

Syntax

dnscmd [<ServerName>] /clearcache

Parameters

  • <ServerName>
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

Sample usage

dnscmd dnssvr1.contoso.com /clearcache 

dnscmd /config

Changes values in the registry for the DNS server and individual zones. Accepts server-level settings and zone-level settings.

Warning

Do not edit the registry directly unless you have no alternative. The registry editor bypasses standard safeguards, allowing settings that can degrade performance, damage your system, or even require you to reinstall Windows. You can safely alter most registry settings by using the programs in Control Panel or Microsoft Management Console (MMC). If you must edit the registry directly, back it up first. Read the Registry Editor Help for more information.

Server-level syntax

dnscmd [<ServerName>] /config <Parameter>

dnscmd /config

Modifies the configuration of the specified server.

Parameters

  • <ServerName>
    Specifies the DNS server that you are planning to manage, represented by local computer syntax, IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <Parameter>
    Specify a setting and, as an option, a value. Parameter values use this syntax: Parameter [Value]

    The following parameter values are described in the remainder of this section:

    • /addressanswerlimit

    • /bindsecondaries

    • /bootmethod

    • /defaultagingstate

    • /defaultnorefreshinterval

    • /defaultrefreshinterval

    • /disableautoreversezones

    • /disablensrecordsautocreation

    • /dspollinginterval

    • /dstombstoneinterval

    • /ednscachetimeout

    • /enablednsprobes

    • /enablednssec

    • /enableglobalnamessupport

    • /enableglobalqueryblocklist

    • /eventloglevel

    • /forwarddelegations

    • /forwardingtimeout

    • /globalnamesqueryorder

    • /globalqueryblocklist

    • /isslave

    • /localnetpriority

    • /logfilemaxsize

    • /logfilepath

    • /logipfilterlist

    • /loglevel

    • /maxcachesize

    • /maxcachettl

    • /namecheckflag

    • /notcp

    • /norecursion

    • /recursionretry

    • /recursiontimeout

    • /roundrobin

    • /rpcprotocol

    • /scavenginginterval

    • /secureresponses

    • /sendport

    • /strictfileparsing

    • /updateoptions

    • /writeauthorityns

    • /xfrconnecttimeout

  • /addressanswerlimit [0|5-28] 
    Specifies the maximum number of host records that a DNS server can send in response to a query. The value can be zero (0), or it can be in the range of 5 through 28 records. The default value is zero (0).

  • /bindsecondaries [0|1] 
    Changes the format of the zone transfer so that it can achieve maximum compression and efficiency. However, this format is not compatible with earlier versions of Berkeley Internet Name Domain (BIND).

    • 0 
      Uses maximum compression. This format is compatible with BIND versions 4.9.4 and later only.

    • 1 
      Sends only one resource record per message to non-Microsoft DNS servers. This format is compatible with BIND versions earlier than 4.9.4. This is the default setting.

  • /bootmethod [0|1|2|3] 
    Determines the source from which the DNS server gets its configuration information.

    • 0 
      Clears the source of configuration information.

    • 1 
      Loads from the BIND file that is located in the DNS directory, which is %systemroot%\System32\DNS by default.

    • 2 
      Loads from the registry.

    • 3 
      Loads from AD DS and the registry. This is the default setting.

  • /defaultagingstate [0|1] 
    Determines whether the DNS scavenging feature is enabled by default on newly created zones.

    • 0 
      Disables scavenging. This is the default setting.

    • 1 
      Enables scavenging.

  • /defaultnorefreshinterval [0x1-0xFFFFFFFF|0xA8] 
    Sets a period of time in which no refreshes are accepted for dynamically updated records. Zones on the server inherit this value automatically. To change the default value, type a value in the range of 0x1-0xFFFFFFFF. The default value from the server is 0xA8.

  • /defaultrefreshinterval [0x1-0xFFFFFFFF|0xA8] 
    Sets a period of time that is allowed for dynamic updates to DNS records. Zones on the server inherit this value automatically. To change the default value, type a value in the range of 0x1-0xFFFFFFFF. The default value from the server is 0xA8.

  • /disableautoreversezones [0|1] 
    Enables or disables the automatic creation of reverse lookup zones. Reverse lookup zones provide resolution of Internet Protocol (IP) addresses to DNS domain names.

    • 0 
      Enables the automatic creation of reverse lookup zones. This is the default setting.

    • 1 
      Disables the automatic creation of reverse lookup zones.

  • /disablensrecordsautocreation {0|1} 
    Specifies whether the DNS server automatically creates name server (NS) resource records for zones that it hosts.

    • 0 
      Automatically creates name server (NS) resource records for zones that the DNS server hosts.

    • 1 
      Does not automatically create name server (NS) resource records for zones that the DNS server hosts.

  • /dspollinginterval 0-30 
    Specifies how often the DNS server polls AD DS for changes in Active Directory–integrated zones.

  • /dstombstoneinterval [1-30] 
    The amount of time in seconds to retain deleted records in AD DS.

  • /ednscachetimeout [<seconds>] 
    Specifies the number of seconds that Extended DNS (EDNS) information is cached. The minimum value is 3600, and the maximum value is 15,724,800. The default value is 604,800 seconds (one week).

  • /enableednsprobes {0|1} 
    Enables or disables the server to probe other servers to determine if they support EDNS.

    • 0 
      Disables active support for EDNS probes.

    • 1 
      Enables active support for EDNS probes.

  • /enablednssec {0|1} 
    Enables or disables support for DNS Security Extensions (DNSSEC).

    • 0 
      Disables DNSSEC.

    • 1 
      Enables DNSSEC.

  • /enableglobalnamessupport {0|1} 
    Enables or disables support for the GlobalNames zone. The GlobalNames zone supports resolution of single-label DNS names across a forest.

    • 0 
      Disables support for the GlobalNames zone. When you set the value of this command to 0, the DNS Server service does not resolve single-label names in the GlobalNames zone.

    • 1 
      Enables support for the GlobalNames zone. When you set the value of this command to 1, the DNS Server service resolves single-label names in the GlobalNames zone.

  • /enableglobalqueryblocklist {0|1} 
    Enables or disables support for the global query block list that blocks name resolution for names in the list. The DNS Server service creates and enables the global query block list by default when the service starts the first time. To view the current global query block list, use the dnscmd /info /globalqueryblocklist command.

    • 0 
      Disables support for the global query block list. When you set the value of this command to 0, the DNS Server service responds to queries for names in the block list.

    • 1 
      Enables support for the global query block list. When you set the value of this command to 1, the DNS Server service does not respond to queries for names in the block list.

  • /eventloglevel [0|1|2|4] 
    Determines which events are logged in the DNS server log in Event Viewer.

    • 0 
      Logs no events.

    • 1 
      Logs only errors.

    • 2 
      Logs only errors and warnings.

    • 4 
      Logs errors, warnings, and informational events. This is the default setting.

  • /forwarddelegations [0|1] 
    Determines how the DNS server handles a query for a delegated subzone. These queries can be sent either to the subzone that is referred to in the query or to the list of forwarders that is named for the DNS server. Entries in the setting are used only when forwarding is enabled.

    • 0 
      Automatically sends queries that refer to delegated subzones to the appropriate subzone. This is the default setting.

    • 1 
      Forwards queries that refer to the delegated subzone to the existing forwarders.

  • /forwardingtimeout [<seconds>] 
    Determines how many seconds (0x1-0xFFFFFFFF) a DNS server waits for a forwarder to respond before trying another forwarder. The default value is 0x5, which is 5 seconds.

  • /globalneamesqueryorder {0|1}
    Specifies whether the DNS Server service looks first in the GlobalNames zone or local zones when it resolves names.

    • 0
      The DNS Server service attempts to resolve names by querying the GlobalNames zone before it queries the zones for which it is authoritative.

    • 1
      The DNS Server service attempts to resolve names by querying the zones for which it is authoritative before it queries the GlobalNames zone.

  • /globalqueryblocklist [[<name> [<name>]...]
    Replaces the current global query block list with a list of the names that you specify. If you do not specify any names, this command clears the block list. By default, the global query block list contains the following items:

    • isatap

    • wpad

    The DNS Server service can remove either or both of these names when it starts the first time, if it finds these names in an existing zone.

  • /isslave [0|1] 
    Determines how the DNS server responds when queries that it forwards receive no response.

    • 0 
      Specifies that the DNS server is not a subordinate (also known as a slave). If the forwarder does not respond, the DNS server attempts to resolve the query itself. This is the default setting.

    • 1 
      Specifies that the DNS server is a subordinate. If the forwarder does not respond, the DNS server terminates the search and sends a failure message to the resolver.

  • /localnetpriority [0|1] 
    Determines the order in which host records are returned when the DNS server has multiple host records for the same name.

    • 0 
      Returns the records in the order in which they are listed in the DNS database.

    • 1 
      Returns the records that have similar IP network addresses first. This is the default setting.

  • /logfilemaxsize [<size>] 
    Specifies the maximum size in bytes (0x10000-0xFFFFFFFF) of the Dns.log file. When the file reaches its maximum size, DNS overwrites the oldest events. The default size is 0x400000, which is 4 megabytes (MB).

  • /logfilepath [<Path+LogFileName>] 
    Specifies the path of the Dns.log file. The default path is %systemroot%\System32\Dns\Dns.log. You can specify a different path by using the format Path+LogFileName.

  • /logipfilterlist <IPAddress> [,<IPAddress>...] 
    Specifies which packets are logged in the debug log file. The entries are a list of IP addresses. Only packets going to and from the IP addresses in the list are logged.

  • /loglevel [<EventType>] 
    Determines which types of events are recorded in the Dns.log file. Each event type is represented by a hexadecimal number. If you want more than one event in the log, use hexadecimal addition to add the values, and then enter the sum.

    • 0x0 
      The DNS server does not create a log. This is the default entry.

    • 0x10 
      Logs queries.

    • 0x10 
      Logs notifications.

    • 0x20 
      Logs updates.

    • 0xFE 
      Logs nonquery transactions.

    • 0x100 
      Logs question transactions.

    • 0x200 
      Logs answers.

    • 0x1000 
      Logs send packets.

    • 0x2000 
      Logs receive packets.

    • 0x4000 
      Logs User Datagram Protocol (UDP) packets.

    • 0x8000 
      Logs Transmission Control Protocol (TCP) packets.

    • 0xFFFF 
      Logs all packets.

    • 0x10000 
      Logs Active Directory write transactions.

    • 0x20000 
      Logs Active Directory update transactions.

    • 0x1000000 
      Logs full packets.

    • 0x80000000 
      Logs write-through transactions.

  • /maxcachesize 
    Specifies the maximum size, in kilobytes (KB), of the DNS server’s memory cache.

  • /maxcachettl [<seconds>] 
    Determines how many seconds (0x0-0xFFFFFFFF) a record is saved in the cache. If the 0x0 setting is used, the DNS server does not cache records. The default setting is 0x15180 (86,400 seconds or 1 day).

  • /maxnegativecachettl [<seconds>] 
    Specifies how many seconds (0x1-0xFFFFFFFF) an entry that records a negative answer to a query remains stored in the DNS cache. The default setting is 0x384 (900 seconds).

  • /namecheckflag [0|1|2|3] 
    Specifies which character standard is used when checking DNS names.

    • 0 
      Uses ANSI characters that comply with Internet Engineering Task Force (IETF) Request for Comments (RFCs).

    • 1 
      Uses ANSI characters that do not necessarily comply with IETF RFCs.

    • 2 
      Uses multibyte UCS Transformation Format 8 (UTF-8) characters. This is the default setting.

    • 3 
      Uses all characters.

  • /norecursion [0|1] 
    Determines whether a DNS server performs recursive name resolution.

    • 0 
      The DNS server performs recursive name resolution if it is requested in a query. This is the default setting.

    • 1 
      The DNS server does not perform recursive name resolution.

  • /notcp 
    This parameter is obsolete, and it has no effect in current versions of Windows Server.

  • /recursionretry [<seconds>] 
    Determines the number of seconds (0x1-0xFFFFFFFF) that a DNS server waits before again trying to contact a remote server. The default setting is 0x3 (three seconds). This value should be increased when recursion occurs over a slow wide area network (WAN) link.

  • /recursiontimeout [<seconds>] 
    Determines the number of seconds (0x1-0xFFFFFFFF) that a DNS server waits before discontinuing attempts to contact a remote server. The settings range from 0x1 through 0xFFFFFFFF. The default setting is 0xF (15 seconds). This value should be increased when recursion occurs over a slow WAN link.

  • /roundrobin [0|1] 
    Determines the order in which host records are returned when a server has multiple host records for the same name.

    • 0
      The DNS server does not use round robin. Instead, it returns the first record to every query.

    • 1 
      The DNS server rotates among the records that it returns from the top to the bottom of the list of matching records. This is the default setting.

  • /rpcprotocol [0x0|0x1|0x2|0x4|0xFFFFFFFF] 
    Specifies the protocol that remote procedure call (RPC) uses when it makes a connection from the DNS server.

    • 0x0 
      Disables RPC for DNS.

    • 0x1 
      Uses TCP/IP.

    • 0x2 
      Uses named pipes.

    • 0x4 
      Uses local procedure call (LPC).

    • 0xFFFFFFFF 
      All protocols. This is the default setting.

  • /scavenginginterval [<hours>] 
    Determines whether the scavenging feature for the DNS server is enabled, and sets the number of hours (0x0-0xFFFFFFFF) between scavenging cycles. The default setting is 0x0, which disables scavenging for the DNS server. A setting greater than 0x0 enables scavenging for the server and sets the number of hours between scavenging cycles.

  • /secureresponses [0|1] 
    Determines whether DNS filters records that are saved in a cache.

    • 0 
      Saves all responses to name queries to a cache. This is the default setting.

    • 1 
      Saves only the records that belong to the same DNS subtree to a cache.

  • /sendport [<port>] 
    Specifies the port number (0x0-0xFFFFFFFF) that DNS uses to send recursive queries to other DNS servers. The default setting is 0x0, which means that the port number is selected randomly.

  • /serverlevelplugindll[<DllPath>]
    Specifies the path of a custom plug-in. When DllPath specifies the fully qualified path name of a valid DNS server plug-in, the DNS server calls functions in the plug-in to resolve name queries that are outside the scope of all locally hosted zones. If a queried name is out of the scope of the plug-in, the DNS server performs name resolution using forwarding or recursion, as configured. If DllPath is not specified, the DNS server ceases to use a custom plug-in if a custom plug-in was previously configured.

  • /strictfileparsing [0|1] 
    Determines a DNS server's behavior when it encounters an erroneous record while loading a zone.

    • 0 
      The DNS server continues to load the zone even if the server encounters an erroneous record. The error is recorded in the DNS log. This is the default setting.

    • 1 
      The DNS server stops loading the zone, and it records the error in the DNS log.

  • /updateoptions <RecordValue> 
    Prohibits dynamic updates of specified types of records. If you want more than one record type to be prohibited in the log, use hexadecimal addition to add the values, and then enter the sum.

    • 0x0 
      Does not restrict any record types.

    • 0x1 
      Excludes start of authority (SOA) resource records.

    • 0x2 
      Excludes name server (NS) resource records.

    • 0x4 
      Excludes delegation of name server (NS) resource records.

    • 0x8 
      Excludes server host records.

    • 0x100 
      During secure dynamic update, excludes start of authority (SOA) resource records.

    • 0x200 
      During secure dynamic update, excludes root name server (NS) resource records.

    • 0x30F 
      During standard dynamic update, excludes name server (NS) resource records, start of authority (SOA) resource records, and server host records. During secure dynamic update, excludes root name server (NS) resource records and start of authority (SOA) resource records. Allows delegations and server host updates.

    • 0x400 
      During secure dynamic update, excludes delegation name server (NS) resource records.

    • 0x800 
      During secure dynamic update, excludes server host records.

    • 0x1000000 
      Excludes delegation signer (DS) records.

    • 0x80000000 
      Disables DNS dynamic update.

  • /writeauthorityns [0|1] 
    Determines when the DNS server writes name server (NS) resource records in the Authority section of a response.

    • 0 
      Writes name server (NS) resource records in the Authority section of referrals only. This setting complies with RFC 1034, “Domain names—concepts and facilities,” and with RFC 2181, “Clarifications to the DNS Specification.” This is the default setting.

    • 1 
      Writes name server (NS) resource records in the Authority section of all successful authoritative responses.

  • /xfrconnecttimeout [<seconds>] 
    Determines the number of seconds (0x0-0xFFFFFFFF) a primary DNS server waits for a transfer response from its secondary server. The default value is 0x1E (30 seconds). After the time-out value expires, the connection is terminated.

Zone-level syntax

dnscmd /config <Parameters>

dnscmd /config

Modifies the configuration of the specified zone.

Parameters

  • <Parameters> 
    Specify a setting, a zone name, and, as an option, a value. Parameter values use this syntax: ZoneName Parameter [Value]

    The following parameter values are documented in the remainder of this section:

    • /aging

    • /allownsrecordsautocreation

    • /allowupdate

    • /forwarderslave

    • /forwardertimeout

    • /norefreshinterval

    • /refreshinterval

    • /securesecondaries

  • /aging <ZoneName> 
    Enables or disables scavenging in a specific zone.

  • /allownsrecordsautocreation <ZoneName> [<Value>] 
    Overrides the DNS server's name server (NS) resource record autocreation setting. Name server (NS) resource records that were previously registered for this zone are not affected. Therefore, you must remove them manually if you do not want them.

  • /allowupdate <ZoneName> 
    Determines whether the specified zone accepts dynamic updates.

  • /forwarderslave <ZoneName> 
    Overrides the DNS server /isslave setting.

  • /forwardertimeout <ZoneName> 
    Determines how many seconds a DNS zone waits for a forwarder to respond before trying another forwarder. This value overrides the value that is set at the server level.

  • /norefreshinterval <ZoneName> 
    Sets a time interval for a zone during which no refreshes can dynamically update DNS records in a specified zone.

  • /refreshinterval <ZoneName> 
    Sets a time interval for a zone during which refreshes can dynamically update DNS records in a specified zone.

  • /securesecondaries <ZoneName> 
    Determines which secondary servers can receive zone updates from the master server for this zone.

Remarks

  • The zone name must be specified only for zone-level parameters.

dnscmd /createbuiltindirectorypartitions

Creates a DNS application directory partition. When DNS is installed, an application directory partition for the service is created at the forest and domain levels. Use this command to create DNS application directory partitions that were deleted or never created. With no parameter, this command creates a built-in DNS directory partition for the domain.

Syntax

dnscmd [<ServerName>] /createbuiltindirectorypartitions [/forest] [/alldomains] 

Parameters

  • <ServerName>
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • /forest 
    Creates a DNS directory partition for the forest.

  • /alldomains 
    Creates DNS partitions for all domains in the forest.

dnscmd /createdirectorypartition

Creates a DNS application directory partition. When DNS is installed, an application directory partition for the service is created at the forest and domain levels. This operation creates additional DNS application directory partitions.

Syntax

dnscmd [<ServerName>] /createdirectorypartition <PartitionFQDN>

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <PartitionFQDN> 
    The FQDN of the DNS application directory partition that will be created.

dnscmd /deletedirectorypartition

Removes an existing DNS application directory partition.

Syntax

dnscmd [<ServerName>] /deletedirectorypartition <PartitionFQDN>

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <PartitionFQDN> 
    The FQDN of the DNS application directory partition that will be removed.

dnscmd /directorypartitioninfo

Lists information about a specified DNS application directory partition.

Syntax

dnscmd [<ServerName>] /directorypartitioninfo <PartitionFQDN> [/detail] 

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <PartitionFQDN> 
    The FQDN of the DNS application directory partition.

  • /detail 
    Lists all information about the application directory partition.

dnscmd /enlistdirectorypartition

Adds the DNS server to the specified directory partition's replica set.

Syntax

dnscmd [<ServerName>] /enlistdirectorypartition <PartitionFQDN>

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <PartitionFQDN> 
    The FQDN of the DNS application directory partition.

dnscmd /enumdirectorypartitions

Lists the DNS application directory partitions for the specified server.

Syntax

dnscmd [<ServerName>] /enumdirectorypartitions [/custom] 

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • /custom 
    Lists only user-created directory partitions.

dnscmd /enumrecords

Lists the resource records of a specified node in a DNS zone.

Syntax

dnscmd [<ServerName>] /enumrecords <ZoneName> <NodeName> [/type <RRType> <RRData>] [/authority] [/glue] [/additional] [/node | /child | /startchild<ChildName>] [/continue | /detail] 

Parameters

  • <ServerName> 
    Specifies the DNS server that you plan to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • /enumrecords
    Lists resource records in the specified zone.

  • <ZoneName> 
    Specifies the name of the zone to which the resource records belong.

  • <NodeName> 
    Specifies the name of the node of the resource records.

  • /type <RRType> <RRData> 
    Specifies the type of resource records to be listed and the type of data that is expected:

    • <RRType> 
      Specifies the type of resource records to be listed.

    • <RRData> 
      Specifies the type of data that is expected record.

  • /authority 
    Includes authoritative data.

  • /glue 
    Includes glue data.

  • /additional 
    Includes all additional information about the listed resource records.

  • {/node | /child | /startchild <ChildName>} 
    Filters or adds information to the resource record display:

    • /node 
      Lists only the resource records of the specified node.

    • /child 
      Lists only the resource records of a specified child domain.

    • /startchild <ChildName> 
      Begins the list at the specified child domain.

  • /continue | /detail
    Specifies how the returned data is displayed.

    • /continue 
      Lists only the resource records with their type and data.

    • /detail 
      Lists all information about the resource records.

Sample usage

dnscmd /enumrecords test.contoso.com test /additional 

dnscmd /enumzones

Lists the zones that exist on the specified DNS server.

Syntax

dnscmd [<ServerName>] /enumzones [/primary | /secondary | /forwarder | /stub | /cache | /auto-created] [/forward | /reverse | /ds | /file] [/domaindirectorypartition | /forestdirectorypartition | /customdirectorypartition | /legacydirectorypartition | /directorypartition <PartitionFQDN>]

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • /primary | /secondary | /forwarder | /stub | /cache | /auto-created
    Filters the types of zones to display:

    • /primary 
      Lists all zones that are either standard primary zones or Active Directory–integrated zones.

    • /secondary 
      Lists all standard secondary zones.

    • /forwarder 
      Lists zones that forward unresolved queries to another DNS server.

    • /stub 
      Lists all stub zones.

    • /cache 
      Lists only the zones that are loaded into the cache.

    • /auto-created 
      Lists the zones that were created automatically during the DNS server installation.

  • /forward | /reverse | /ds | /file
    Specifies additional filters of the types of zones to display:

    • /forward 
      Lists forward lookup zones.

    • /reverse 
      Lists reverse lookup zones.

    • /ds 
      Lists Active Directory–integrated zones.

    • /file 
      Lists zones that are backed by files.

    • /domaindirectorypartition 
      Lists zones that are stored in the domain directory partition.

    • /forestdirectorypartition 
      Lists zones that are stored in the forest DNS application directory partition.

    • /customdirectorypartition 
      Lists all zones that are stored in a user-defined application directory partition.

    • /legacydirectorypartition 
      Lists all zones that are stored in the domain directory partition.

    • /directorypartition <PartitionFQDN> 
      Lists all zones that are stored in the specified directory partition.

Remarks

  • The enumzones parameters act as filters on the list of zones. If no filters are specified, a complete list of zones is returned. When a filter is specified, only the zones that meet that filter's criteria are included in the returned list of zones.

Example

See Example 2: Display a complete list of zones on a DNS server or Example 3: Display a list of autocreated zones on a DNS server.

dnscmd /exportsettings

Creates a text file that lists the configuration details of a DNS server. The text file is named DnsSettings.txt. It is located in the %systemroot%\system32\dns directory of the server.

Syntax

dnscmd [<ServerName>] /exportsettings 

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by local computer syntax, IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

Remarks

  • You can use the information in the file that dnscmd /exportsettings creates to troubleshoot configuration problems or to ensure that you have configured multiple servers identically.

dnscmd /info

Displays settings from the DNS section of the registry of the specified server: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DNS\Parameters

Syntax

dnscmd [<ServerName>] /info [<Setting>]

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <Setting> 
    Any setting that the info command returns can be specified individually. If a setting is not specified, a report of common settings is returned.

Remarks

  • This command displays registry settings that are at the DNS server level. To display zone-level registry settings, use the dnscmd /zoneinfo command. To see a list of settings that can be displayed with this command, see the dnscmd /config description.

Example

See Example 4: Display the IsSlave setting from a DNS server or Example 5: Display the RecursionTimeout setting from a DNS server.

dnscmd /ipvalidate

Tests whether an IP address identifies a functioning DNS server or whether the DNS server can act as a forwarder, a root hint server, or a master server for a specific zone.

Syntax

dnscmd [<ServerName>] /ipvalidate <Context> [<ZoneName>] [[<IPAddress>]…]

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by local computer syntax, IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <Context>
    Specifies the type of test to perform. You can specify any of the following tests:

    • /dnsservers tests that the computers with the addresses that you specify are functioning DNS servers.

    • /forwarders tests that the addresses that you specify identify DNS servers that can act as forwarders.

    • /roothints tests that the addresses that you specify identify DNS servers that can act as root hint name servers.

    • /zonemasters tests that the addresses that you specify identify DNS servers that are master servers for ZoneName.

  • <ZoneName> 
    Identifies the zone. Use this parameter with the /zonemasters parameter.

  • <IPAddress>
    Specifies the IP addresses that the command tests.

Sample usage

dnscmd dnssvr1.contoso.com /ipvalidate /dnsservers 10.0.0.1 10.0.0.2

dnscmd dnssvr1.contoso.com /ipvalidate /zonemasters corp.contoso.com 10.0.0.2 

dnscmd /nodedelete

Deletes all records for a specified host.

Syntax

dnscmd [<ServerName>] /nodedelete <ZoneName> <NodeName> [/tree] [/f]

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone.

  • <NodeName> 
    Specifies the host name of the node to delete.

  • /tree 
    Deletes all the child records.

  • /f 
    Executes the command without asking for confirmation.

Example

See Example 6: Delete the records from a node.

dnscmd /recordadd

Adds a record to a specified zone in a DNS server.

Syntax

dnscmd [<ServerName>] /recordadd <ZoneName> <NodeName> <RRType> <RRData>

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by local computer syntax, IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the zone in which the record resides.

  • <NodeName> 
    Specifies a specific node in the zone.

  • <RRType> 
    Specifies the type of record to be added.

  • <RRData> 
    Specifies the type of data that is expected.

Note

When you add a record, make sure that you use the correct data type and data format. For a list of resource record types and the appropriate data types, see Resource records reference.

Sample usage

dnscmd dnssvr1.contoso.com /recordadd test A 10.0.0.5

dnscmd /recordadd test.contoso.com test MX 10 mailserver.test.contoso.com 

dnscmd /recorddelete

Deletes a resource record from a specified zone.

Syntax

dnscmd <ServerName> /recorddelete <ZoneName> <NodeName> <RRType> <RRData>[/f]

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the zone in which the resource record resides.

  • <NodeName> 
    Specifies the name of the host.

  • <RRType> 
    Specifies the type of resource record to be deleted.

  • <RRData> 
    Specifies the type of data that is expected.

  • /f 
    Executes the command without asking for confirmation:

    • Because nodes can have more than one resource record, this command requires you to be very specific about the type of resource record that you want to delete.

    • If you specify a data type and you do not specify a type of resource record data, all records with that specific data type for the specified node are deleted.

Sample usage

dnscmd /recorddelete test.contoso.com test MX 10 mailserver.test.contoso.com 

dnscmd /resetforwarders

Selects or resets the IP addresses to which the DNS server forwards DNS queries when it cannot resolve them locally.

Syntax

dnscmd [<ServerName>] /resetforwarders [<IPAddress> [,<IPAddress>]...][/timeout <TimeOut>] [/slave|/noslave]

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <IPAddress> 
    Lists the IP addresses to which the DNS server forwards unresolved queries.

  • /timeout <TimeOut> 
    Sets the number of seconds that the DNS server waits for a response from the forwarder. By default, this value is five seconds.

  • /slave|/noslave
    Determines whether the DNS server performs its own iterative queries if the forwarder fails to resolve a query:

    • /slave 
      Prevents the DNS server from performing its own iterative queries if the forwarder fails to resolve a query.

    • /noslave 
      Allows the DNS server to perform its own iterative queries if the forwarder fails to resolve a query. This is the default setting.

Remarks

  • By default, a DNS server performs iterative queries when it cannot resolve a query.

  • Setting IP addresses by using the resetforwarders command causes the DNS server to perform recursive queries to the DNS servers at the specified IP addresses. If the forwarders do not resolve the query, the DNS server can then perform its own iterative queries.

  • If the /slave parameter is used, the DNS server does not perform its own iterative queries. This means that the DNS server forwards unresolved queries only to the DNS servers in the list, and it does not attempt iterative queries if the forwarders do not resolve them. It is more efficient to set one IP address as a forwarder for a DNS server. You can use the resetforwarders command for internal servers in a network to forward their unresolved queries to one DNS server that has an external connection.

  • Listing a forwarder’s IP address twice causes the DNS server to attempt to forward to that server twice.

Sample usage

 dnscmd dnssvr1.contoso.com /resetforwarders 10.0.0.1 /timeout 7 /slave

dnscmd dnssvr1.contoso.com /resetforwarders /noslave 

dnscmd /resetlistenaddresses

Specifies the IP addresses on a server that listens for DNS client requests.

Syntax

dnscmd [<ServerName>] /resetlistenaddresses [<ListenAddress>]

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ListenAddress> 
    Specifies an IP address on the DNS server that listens for DNS client requests. If no listen address is specified, all IP addresses on the server listen for client requests.

Remarks

  • By default, all IP addresses on a DNS server listen for client DNS requests.

Sample usage

dnscmd dnssvr1.contoso.com /resetlistenaddresses 10.0.0.1 

dnscmd /startscavenging

Tells a DNS server to attempt an immediate search for stale resource records in a specified DNS server.

Syntax

dnscmd [<ServerName>] /startscavenging

Parameter

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

Remarks

  • Successful completion of this command starts a scavenge immediately.

  • Although the command to start the scavenge appears to complete successfully, the scavenge does not start unless the following preconditions are met:

    • Scavenging is enabled for both the server and the zone.

    • The zone is started.

    • The resource records have a time stamp.

  • For information about how to enable scavenging for the server, see the scavenginginterval parameter under “Server-level syntax” in the dnscmd /config section.

  • For information about how to enable scavenging for the zone, see the aging parameter under “Zone-level syntax” in the dnscmd /config section.

  • For information about how to start a zone that is paused, see the dnscmd /zoneresume section.

  • For information about how to check resource records for a time stamp, see the dnscmd /ageallrecords section.

  • If the scavenge fails, no warning message appears.

Sample usage

dnscmd dnssvr1.contoso.com /startscavenging 

dnscmd /statistics

Displays or clears data for a specified DNS server.

Syntax

dnscmd [<ServerName>] /statistics [<StatID>] [/clear] 

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <StatID> 
    Specifies which statistic or combination of statistics to display. An identification number is used to identify a statistic. If no statistic ID number is specified, all statistics display.

    The following is a list of numbers that can be specified and the corresponding statistic that displays:

    • 00000001 
      Time

    • 00000002 
      Query

    • 00000004 
      Query2

    • 00000008 
      Recurse

    • 00000010 
      Master

    • 00000020 
      Secondary

    • 00000040 
      WINS

    • 00000100 
      Update

    • 00000200 
      SkwanSec

    • 00000400 
      Ds

    • 00010000 
      Memory

    • 00100000 
      PacketMem

    • 00040000 
      Dbase

    • 00080000 
      Records

    • 00200000 
      NbstatMem

  • /clear 
    Resets the specified statistics counter to zero.

Remarks

  • The statistics command displays counters that begin on the DNS server when it is started or resumed.

Examples

See Example 7: Display time statistics for a DNS server or Example 8: Display NbstatMem statistics for a DNS server.

dnscmd /unenlistdirectorypartition

Removes the DNS server from the specified directory partition's replica set.

Syntax

dnscmd [<ServerName>] /unenlistdirectorypartition <PartitionFQDN>

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <PartitionFQDN>
    The FQDN of the DNS application directory partition that will be removed.

dnscmd /writebackfiles

Checks the DNS server memory for changes, and writes them to persistent storage.

Syntax

dnscmd [<ServerName>] /writebackfiles [<ZoneName>]

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone to be updated.

Remarks

  • The writebackfiles command updates all dirty zones or a specified zone. A zone is “dirty” when there are changes in memory that have not yet been written to persistent storage. This is a server-level operation that checks all zones. You can specify one zone in this operation or you can use the dnscmd /zonewriteback operation.

Sample usage

dnscmd dnssvr1.contoso.com /writebackfiles 

dnscmd /zoneadd

Adds a zone to the DNS server.

Syntax

dnscmd [<ServerName>] /zoneadd <ZoneName> <ZoneType> [/dp <FQDN>| {/domain|/enterprise|/legacy}]

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone.

  • <ZoneType> 
    Specifies the type of zone to create. Each zone type has different required parameters:

    • /dsprimary 
      Creates an Active Directory–integrated zone.

    • /primary /file <FileName> 
      Creates a standard primary zone, and specifies the name of the file that will store the zone information.

    • /secondary <MasterIPAddress> [<MasterIPAddress>...]
      Creates a standard secondary zone.

    • /stub <MasterIPAddress> [<MasterIPAddress>...] /file <FileName>
      Creates a file-backed stub zone.

    • /dsstub <MasterIPAddress> [<MasterIPAddress>...]
      Creates an Active Directory–integrated stub zone.

    • /forwarder <MasterIPAddress> [<MasterIPAddress>]... /file <FileName>
      Specifies that the created zone forwards unresolved queries to another DNS server.

    • /dsforwarder 
      Specifies that the created Active Directory–integrated zone forwards unresolved queries to another DNS server.

  • /dp <FQDN> {/domain | /enterprise | /legacy} 
    Specifies the directory partition on which to store the zone.

    • <FQDN> 
      Specifies FQDN of the directory partition.

    • /domain 
      Stores the zone on the domain directory partition.

    • /enterprise 
      Stores the zone on the enterprise directory partition.

    • /legacy 
      Stores the zone on a legacy directory partition.

Remarks

  • Specifying a zone type of /forwarder or /dsforwarder creates a zone that performs conditional forwarding.

Sample usage

dnscmd dnssvr1.contoso.com /zoneadd test.contoso.com /dsprimary

dnscmd dnssvr1.contoso.com /zoneadd secondtest.contoso.com /secondary 10.0.0.2 

dnscmd /zonechangedirectorypartition

Changes the directory partition on which the specified zone resides.

Syntax

dnscmd [<ServerName>] /zonechangedirectorypartition <ZoneName>] {[<NewPartitionName>] | [<ZoneType>] }

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    The FQDN of the current directory partition on which the zone resides.

  • <NewPartitionName> 
    The FQDN of the directory partition that the zone will be moved to.

  • <ZoneType> 
    Specifies the type of directory partition that the zone will be moved to.

    • /domain 
      Moves the zone to the built-in domain directory partition.

    • /forest 
      Moves the zone to the built-in forest directory partition.

    • /legacy 
      Moves the zone to the directory partition that is created for pre–Active Directory domain controllers. These directory partitions are not necessary for native mode.

dnscmd /zonedelete

Deletes a specified zone.

Syntax

dnscmd [<ServerName>] /zonedelete <ZoneName> [/dsdel] [/f]

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone to be deleted.

  • /dsdel 
    Deletes the zone from AD DS.

  • /f 
    Runs the command without asking for confirmation.

Example

See Example 9: Delete a zone from a DNS server.

dnscmd /zoneexport

Creates a text file that lists the resource records of a specified zone.

Syntax

dnscmd [<ServerName>] /zoneexport <ZoneName> <ZoneExportFile>

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by local computer syntax, IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone.

  • <ZoneExportFile> 
    Specifies the name of the file to create.

Remarks

  • The zoneexport operation creates a file of resource records for an Active Directory–integrated zone for troubleshooting purposes. By default, the file that this command creates is placed in the DNS directory, which is by default the %systemroot%/System32/Dns directory.

Example

See Example 10: Export zone resource records list to a file.

dnscmd /zoneinfo

Displays settings from the section of the registry of the specified zone: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DNS\Parameters\Zones\<ZoneName>

Syntax

dnscmd [<ServerName>] /zoneinfo <ZoneName>  [<Setting>]

Parameters

  • <ServerName>
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone.

  • <Setting> 
    You can individually specify any setting that the zoneinfo command returns. If you do not specify a setting, all settings are returned.

Remarks

  • The zoneinfo command displays registry settings that are at the DNS zone level at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DNS\Parameters\Zones\<ZoneName>.

  • To display server-level registry settings, use the dnscmd /info command.

  • To see a list of settings that you can display with this command, see the dnscmd /config command.

Example

See Example 11: Display RefreshInterval setting from the registry or Example 12: Display Aging setting from the registry.

dnscmd /zonepause

Pauses the specified zone, which then ignores query requests.

Syntax

dnscmd [<ServerName>] /zonepause <ZoneName>

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone to be paused.

Remarks

  • To resume a zone and make it available after it has been paused, use the dnscmd /zoneresume command.

Sample usage

dnscmd dnssvr1.contoso.com /zonepause test.contoso.com 

dnscmd /zoneprint

Lists the records in a zone.

Syntax

dnscmd [<ServerName>] /zoneprint <ZoneName>

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by local computer syntax, IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Identifies the zone to be listed.

dnscmd /zonerefresh

Forces a secondary DNS zone to update from the master zone.

Syntax

dnscmd <ServerName> /zonerefresh <ZoneName> 

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone to be refreshed.

Remarks

  • The zonerefresh command forces a check of the version number in the master server’s start of authority (SOA) resource record. If the version number on the master server is higher than the secondary server's version number, a zone transfer is initiated that updates the secondary server. If the version number is the same, no zone transfer occurs.

  • The forced check occurs by default every 15 minutes. To change the default, use the dnscmd config refreshinterval command.

Sample usage

dnscmd dnssvr1.contoso.com /zonerefresh test.contoso.com 

dnscmd /zonereload

Copies zone information from its source.

Syntax

dnscmd <ServerName> /zonereload <ZoneName> 

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone to be reloaded.

Remarks

  • If the zone is Active Directory–integrated, it reloads from AD DS.

  • If the zone is a standard file-backed zone, it reloads from a file.

Sample usage

dnscmd dnssvr1.contoso.com /zonereload test.contoso.com 

dnscmd /zoneresetmasters

Resets the IP addresses of the master server that provides zone transfer information to a secondary zone.

Syntax

dnscmd <ServerName> /zoneresetmasters <ZoneName> [/local] [<IPAddress> [<IPAddress>]...]

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone to be reloaded.

  • /local 
    Sets a local master list. This parameter is used for Active Directory–integrated zones.

  • <IPAddress> 
    The IP addresses of the master servers of the secondary zone.

Remarks

  • This value is originally set when the secondary zone is created. Use the zoneresetmasters command on the secondary server. This value has no effect if it is set on the master DNS server.

Sample usage

dnscmd dnssvr1.contoso.com /zoneresetmasters test.contoso.com 10.0.0.1

dnscmd dnssvr1.contoso.com /zoneresetmasters test.contoso.com /local 

dnscmd /zoneresetscavengeservers

Changes the IP addresses of the servers that can scavenge the specified zone.

Syntax

dnscmd [<ServerName>] /zoneresetscavengeservers <ZoneName> [<IPAddress> [<IPAddress>]...]

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by local computer syntax, IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Identifies the zone to scavenge.

  • <IPAddress>
    Lists the IP addresses of the servers that can perform the scavenge. If this parameter is omitted, all servers that host this zone can scavenge it.

Remarks

  • By default, all servers that host a zone can scavenge that zone.

  • If a zone is hosted on more than one DNS server, you can use this command to reduce the number of times a zone is scavenged.

  • Scavenging must be enabled on the DNS server and zone that is affected by this command.

Sample usage

dnscmd dnssvr1.contoso.com /zoneresetscavengeservers test.contoso.com 10.0.0.1 10.0.0.2 

dnscmd /zoneresetsecondaries

Specifies a list of IP addresses of secondary servers to which a master server responds when it is asked for a zone transfer.

Syntax

dnscmd [<ServerName>] /zoneresetsecondaries <ZoneName> {/noxfr | /nonsecure | /securens | /securelist <SecurityIPAddresses>} {/nonotify | /notify | /notifylist <NotifyIPAddresses>}

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If the is parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone that will have its secondary servers reset.

  • /noxfr | /nonsecure | /securens | /securelist <SecurityIPAddresses>
    Specifies whether all or only some of the secondary servers requesting an update get an update.

    • /noxfr 
      Specifies that no zone transfers are allowed.

    • /nonsecure 
      Specifies that all zone transfer requests are granted.

    • /securens 
      Specifies that only the server that is listed in the name server (NS) resource record for the zone is granted a transfer.

    • /securelist 
      Specifies that zone transfers are granted only to the list of servers. This parameter must be followed by an IP address or addresses that the master server uses.

    • <SecurityIPAddresses> 
      Lists the IP addresses that receive zone transfers from the master server. This parameter is used only with the /securelist parameter.

  • /nonotify | /notify | /notifylist <NotifyIPAddresses>
    Specifies that a change notification is sent only to certain secondary servers:

    • /nonotify 
      Specifies that no change notifications are sent to secondary servers.

    • /notify 
      Specifies that change notifications are sent to all secondary servers.

    • /notifylist 
      Specifies that change notifications are sent to only the list of servers. This command must be followed by an IP address or addresses that the master server uses.

    • <NotifyIPAddresses> 
      Specifies the IP address or addresses of the secondary server or servers to which change notifications are sent. This list is used only with the /notifylist parameter.

Remarks

  • Use the zoneresetsecondaries command on the master server to specify how it responds to zone transfer requests from secondary servers.

Sample usage

dnscmd dnssvr1.contoso.com /zoneresetsecondaries test.contoso.com /noxfr /nonotify

dnscmd dnssvr1.contoso.com /zoneresetsecondaries test.contoso.com /securelist 11.0.0.2 

dnscmd /zoneresettype

Changes the type of the zone.

Syntax

dnscmd [<ServerName>] /zoneresettype <ZoneName> <ZoneType> [/overwrite_mem | /overwrite_ds] 

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by local computer syntax, IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Identifies the zone on which the type will be changed.

  • <ZoneType> 
    Specifies the type of zone to create. Each type has different required parameters:

    • /dsprimary 
      Creates an Active Directory–integrated zone.

    • /primary /file <FileName> 
      Creates a standard primary zone.

    • /secondary <MasterIPAddress> [,<MasterIPAddress>...]
      Creates a standard secondary zone.

    • /stub <MasterIPAddress>[,<MasterIPAddress>...] /file <FileName>
      Creates a file-backed stub zone.

    • /dsstub <MasterIPAddress>[,<MasterIPAddress>...]
      Creates an Active Directory–integrated stub zone.

    • /forwarder <MasterIPAddress[,<MasterIPAddress>]... /file<FileName>
      Specifies that the created zone forwards unresolved queries to another DNS server.

    • /dsforwarder 
      Specifies that the created Active Directory–integrated zone forwards unresolved queries to another DNS server.

  • /overwrite_mem | /overwrite_ds
    Specifies how to overwrite existing data:

    • /overwrite_mem 
      Overwrites DNS data from data in AD DS.

    • /overwrite_ds 
      Overwrites existing data in AD DS.

Remarks

  • Setting the zone type as /dsforwarder creates a zone that performs conditional forwarding.

Sample usage

dnscmd dnssvr1.contoso.com /zoneresettype test.contoso.com /primary /file test.contoso.com.dns

dnscmd dnssvr1.contoso.com /zoneresettype second.contoso.com /secondary 10.0.0.2 

dnscmd /zoneresume

Starts a specified zone that was previously paused.

Syntax

dnscmd <ServerName> /zoneresume <ZoneName> 

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone to resume.

Remarks

Sample usage

dnscmd dnssvr1.contoso.com /zoneresume test.contoso.com 

dnscmd /zoneupdatefromds

Updates the specified Active Directory–integrated zone from AD DS.

Syntax

dnscmd <ServerName> /zoneupdatefromds <ZoneName> 

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone to update.

Remarks

  • Active Directory–integrated zones perform this update by default every five minutes. To change this parameter, use the dnscmd config dspollinginterval command.

Sample usage

dnscmd dnssvr1.contoso.com /zoneupdatefromds 

dnscmd /zonewriteback

Checks DNS server memory for changes that are relevant to a specified zone, and writes them to persistent storage.

Syntax

dnscmd <ServerName> /zonewriteback <ZoneName> 

Parameters

  • <ServerName> 
    Specifies the DNS server to manage, represented by IP address, FQDN, or host name. If this parameter is omitted, the local server is used.

  • <ZoneName> 
    Specifies the name of the zone to update.

Remarks

  • This is a zone-level operation. You can update all zones on a DNS server with the dnscmd /writebackfiles operation.

Sample usage

dnscmd dnssvr1.contoso.com /zonewriteback test.contoso.com