Export (0) Print
Expand All

EAP

Updated: January 21, 2005

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

EAP

With the Extensible Authentication Protocol (EAP), an arbitrary authentication mechanism authenticates a remote access connection. The exact authentication scheme to be used is negotiated by the remote access client and the authenticator (either the remote access server or the Remote Authentication Dial-In User Service [RADIUS] server). Routing and Remote Access includes support for EAP-TLS and MD5-Challenge by default. You can plug in other EAP modules to the server running Routing and Remote Access to provide other EAP methods.

EAP allows for an open-ended conversation between the remote access client and the authenticator. The conversation consists of authenticator requests for authentication information and the responses by the remote access client. For example, when EAP is used with security token cards, the authenticator can separately query the remote access client for a name, PIN, and card token value. As each query is asked and answered, the remote access client passes through another level of authentication. When all questions have been answered satisfactorily, the remote access client is authenticated.

A specific EAP authentication scheme is known as an EAP type. Both the remote access client and the authenticator must support the same EAP type for successful authentication to occur.

The Windows Server 2003 family includes an EAP infrastructure, two EAP types, and the ability to pass EAP messages to a RADIUS server (EAP-RADIUS).

EAP infrastructure

EAP is a set of internal components that provide architectural support for any EAP type in the form of a plug-in module. For successful authentication, both the remote access client and authenticator must have the same EAP authentication module installed. The Windows Server 2003 family provides two EAP types: MD5-Challenge and EAP-TLS. EAP-TLS is only available for members of a domain. You can also install additional EAP types. The components for an EAP type must be installed on every remote access client and every authenticator.

MD5-Challenge

Message Digest 5 Challenge (MD5-Challenge) is a required EAP type that uses the same challenge handshake protocol as PPP-based CHAP, but the challenges and responses are sent as EAP messages.

A typical use for MD5-Challenge is to authenticate the credentials of remote access clients by using user name and password security systems. You can also use MD5-Challenge to test EAP interoperability.

EAP-TLS

EAP-Transport Level Security (EAP-TLS) is an EAP type that is used in certificate-based security environments. If you are using smart cards for remote access authentication, you must use the EAP-TLS authentication method. The EAP-TLS exchange of messages provides mutual authentication, negotiation of the encryption method, and encrypted key determination between the remote access client and the authenticator. EAP-TLS provides the strongest authentication and key determination method.

EAP-TLS is supported only on servers that are running Routing and Remote Access, that are configured to use Windows Authentication or RADIUS, and that are members of a domain. A remote access server running as a stand-alone server or a member of a workgroup does not support EAP-TLS.

For information about configuring smart cards for remote access clients, see Using smart cards for remote access.

EAP-RADIUS

EAP-RADIUS is not an EAP type, but the passing of EAP messages of any EAP type by an authenticator to a RADIUS server for authentication. For example, for a remote access server that is configured for RADIUS authentication, the EAP messages sent between the remote access client and remote access server are encapsulated and formatted as RADIUS messages between the remote access server and the RADIUS server.

EAP-RADIUS is used in environments where RADIUS is used as the authentication provider. An advantage of using EAP-RADIUS is that EAP types do not need to be installed at each remote access server, only at the RADIUS server. In the case of an IAS server, you only need to install EAP types on the IAS server.

In a typical use of EAP-RADIUS, a server running Routing and Remote Access is configured to use EAP and to use an IAS server for authentication. When a connection is made, the remote access client negotiates the use of EAP with the remote access server. When the client sends an EAP message to the remote access server, the remote access server encapsulates the EAP message as a RADIUS message and sends it to its configured IAS server. The IAS server processes the EAP message and sends a RADIUS-encapsulated EAP message back to the remote access server. The remote access server then forwards the EAP message to the remote access client. In this configuration, the remote access server is only a pass-through device. All processing of EAP messages occurs at the remote access client and the IAS server.

Routing and Remote Access can be configured to authenticate locally, or to a RADIUS server. If Routing and Remote Access is configured to authenticate locally, all EAP methods will be authenticated locally. If Routing and Remote Access is configured to authenticate to a RADIUS server, all EAP messages will be forwarded to the RADIUS server with EAP-RADIUS.

For more information about configuring a server running Routing and Remote Access for EAP-RADIUS, see Configure EAP-RADIUS.

Enabling EAP

To enable EAP-based authentication, you must do the following:

  1. Enable EAP as an authentication protocol on the remote access server. For more information, see Enable EAP.

  2. Enable EAP and, if needed, configure the EAP type on the appropriate remote access policy. For more information, see Introduction to remote access policies and Configure authentication.

  3. Enable and configure EAP on the remote access client. For more information, see Extensible Authentication Protocol (EAP).

Note

  • Make sure your network access server (NAS) supports EAP before you enable it on a remote access policy on an IAS server. For more information, see your NAS documentation.

Was this page helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft