Export (0) Print
Expand All

Configuring devices

Updated: January 21, 2005

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

 

Configuring devices

When you install a Plug and Play device, Windows automatically configures the device so it will work properly with the other devices that are installed on your computer. As part of that configuration process, Windows assigns a unique set of system resources to the device you are installing. These resources can include one or more of the following:

  • Interrupt request (IRQ) line numbers.

  • Direct memory access (DMA) channels.

  • Input/output (I/O) port addresses.

  • Memory address ranges.

Each resource that is assigned to your device must be unique or the device will not function properly. For Plug and Play devices, Windows automatically ensures that these resources are configured properly.

Occasionally, two devices require the same resources, resulting in a device conflict. If this occurs, you can manually change the resource settings to be sure each setting is unique. However some resources, such as interrupts on PCI devices, can be shared, depending on the drivers and computer.

When you install a non-Plug and Play device, the resource settings for the device are not automatically configured. Depending on the type of device you are installing, you may have to manually configure these settings. Instructions for doing so should be supplied in the manual that came with your device.

Generally, you should not change resource settings manually, because when you do, the settings become fixed, and Windows will then have less flexibility when allocating resources to other devices. If too many resources become fixed, Windows may not be able to install new Plug and Play devices.

You can manually configure devices using Device Manager.

Warning

  • Changing resource settings improperly can disable your hardware and cause your computer to malfunction or become inoperable. Resource settings should only be changed if you are certain the new settings do not conflict with other hardware, or if a hardware manufacturer has provided you with specific resource settings for a device.

See Also

Was this page helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft