Export (0) Print
Expand All
2 out of 6 rated this helpful - Rate this topic

IPAutoconfigurationEnabled

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

Data type

Range

Default value

REG_DWORD

0 | 1

1

Description

Determines whether the IP autoconfiguration feature is enabled for this interface.

Autoconfiguration allows TCP/IP to configure an interface even when it cannot locate a Dynamic Host Configuration Protocol (DHCP) server. If TCP/IP cannot locate DCHP server, it configures the interface by using IP addresses from the Microsoft reserved Class B network (169.254.0.0), subnet mask 255.255.0.0. During autoconfiguration, TCP/IP continues trying to locate a DHCP server, and it abandons autoconfiguration if it finds one.

The IPAutoconfigurationEnabled entry can also appear in the interface-name subkeys. By default, the entry in the Parameters subkey applies to all interfaces. However, if this entry appears in an interface-name subkey, that entry takes precedence over the entry in the Parameters subkey when configuring that interface.

Note Image Note

Windows 2000 does not add this entry to the registry. You can add it by editing the registry or by using a program that edits the registry.

Caution Image Caution

Do not change the value of this entry. If you do, the IP address assigned to the interface might not be reliable.

Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft. All rights reserved.