Export (0) Print
Expand All

Wlbs Display Command

The wlbs display command-line command provides much valuable information about the Network Load Balancing host on which it is carried out. It is intended for use in diagnosing problems with NLB configurations. The information comprises the following areas:

  • Details of the current cluster configuration.
    This section includes the current values for the cluster parameters, host parameters, and port rules, and other registry values for the host.
    For more information about the cluster parameters, host parameters, and port rules, see Windows 2000 Network Load Balancing Help.

  • Last 10 event messages.
    The output for each message is the output of the event log. Each message is followed by two lines of hexadecimal numbers.
    For the sake of brevity, all the event messages but one were deleted from the following sample output.

  • IP configuration of the host operating system and network adapter.
    This is the output of the ipconfig command.

  • Current state of the cluster.
    This is the membership of the cluster as of the last convergence.

The following is an example of the output of the wlbs display command:

D:\>wlbs display

WLBS Cluster Control Utility V2.3. (c) 1997-99 Microsoft Corporation

=== Configuration: ===

Current time              = Thu Jul 01 13:02:23 1999

ParametersVersion         = 4

VirtualNICName            = \Device\{31270FF0-11FD-11D3-8B19-02BFAC1FF0AB}

AliveMsgPeriod            = 1000

AliveMsgTolerance         = 5

NumActions                = 50

NumPackets                = 100

NumAliveMsgs              = 66

ClusterNetworkAddress     = 02-bf-00-00-00-00

ClusterName               = cluster.reskit.com

ClusterIPAddress          = 0.0.0.0

ClusterNetworkMask        = 255.255.248.0

DedicatedIPAddress        = 172.31.240.170

DedicatedNetworkMask      = 255.255.248.0

HostPriority              = 1

ClusterModeOnStart        = ENABLED

LicenseKey                =

DescriptorsPerAlloc       = 512

MaxDescriptorAllocs       = 512

ScaleSingleClient         = 0

NBTSupportEnable          = 1

MulticastSupportEnable    = 0

MulticastARPEnable        = 1

MaskSourceMAC             = 1

IPToMACEnable             = 1

ConnectionCleanupDelay    = 300000

RemoteControlEnabled      = 1

RemoteControlUDPPort      = 2504

RemoteControlCode         = 0x0

RemoteMaintenanceEnabled  = 0x0

CurrentVersion            = V2.3

InstallDate               = 0x36D75CDA

VerifyDate                = 0x1C9E7553

NumberOfRules             = 1

PortRules

Start   End     Prot    Mode            Pri     Load    Affinity

   1    65535   Both    Multiple                Equal   S

00000001 0000FFFF 6FFFF001 00000002 00000003 00000001 00010001 00000000

=== Event messages: ===

#3852 ID: 0x40070024 Type: 4 Category: 0 Time: Fri Jun 11 15:29:16 1999

WLBS : registry parameters successfully reloaded.

00000070 00420042 00490041 002D004E 00310057 004E002D 00350054 00000000

00370031 002E0032 00310033 0032002E 00300034 0031002E 00310037

=== IP configuration: ===

Windows NT IP Configuration

        Host Name . . . . . . . . . : NLB-HOST-1

        Primary Domain Name . . . . : testclus.reskit.com

        Node Type . . . . . . . . . : Hybrid

        IP Routing Enabled. . . . . : Yes

        WINS Proxy Enabled. . . . . : No

Ethernet adapter Local Area Connection:

        Adapter Domain Name . . . . :

        DNS servers . . . . . . . . :

        Description . . . . . . . . : 3Com EtherLink XL 10/100 PCI TX NIC (3C905

B-TX)

        Physical Address. . . . . . : 00-C0-4F-57-0E-34

        DHCP Enabled. . . . . . . . : No

        IP Address. . . . . . . . . : 0.0.0.0

        Subnet Mask . . . . . . . . : 0.0.0.0

        IP Address. . . . . . . . . : 172.31.240.170

        Subnet Mask . . . . . . . . : 255.255.248.0

        Default Gateway . . . . . . :

=== Current state: ===

Host 1 is stopped and does not know convergence state of the cluster.
Was this page helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft