Export (0) Print
Expand All
Expand Minimize

New-InboxRule

 

Applies to: Exchange Server 2013, Exchange Online

Topic Last Modified: 2014-03-28

This cmdlet is available in on-premises Exchange Server 2013 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the New-InboxRule cmdlet to create an Inbox rule for a mailbox. Inbox rules are used to process messages in the Inbox based on conditions specified and take actions such as moving a message to a specified folder or deleting a message.

You must have adequate permissions on the mailbox to create an Inbox rule.

For information about the parameter sets in the Syntax section below, see Syntax.

New-InboxRule -Name <String> [-ApplyCategory <MultiValuedProperty>] [-BodyContainsWords <MultiValuedProperty>] [-CopyToFolder <MailboxFolderIdParameter>] [-DeleteMessage <$true | $false>] [-ExceptIfBodyContainsWords <MultiValuedProperty>] [-ExceptIfFlaggedForAction <String>] [-ExceptIfFrom <RecipientIdParameter[]>] [-ExceptIfFromAddressContainsWords <MultiValuedProperty>] [-ExceptIfHasAttachment <$true | $false>] [-ExceptIfHasClassification <MessageClassificationIdParameter[]>] [-ExceptIfHeaderContainsWords <MultiValuedProperty>] [-ExceptIfMessageTypeMatches <AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport>] [-ExceptIfMyNameInCcBox <$true | $false>] [-ExceptIfMyNameInToBox <$true | $false>] [-ExceptIfMyNameInToOrCcBox <$true | $false>] [-ExceptIfMyNameNotInToBox <$true | $false>] [-ExceptIfReceivedAfterDate <ExDateTime>] [-ExceptIfReceivedBeforeDate <ExDateTime>] [-ExceptIfRecipientAddressContainsWords <MultiValuedProperty>] [-ExceptIfSentOnlyToMe <$true | $false>] [-ExceptIfSentTo <RecipientIdParameter[]>] [-ExceptIfSubjectContainsWords <MultiValuedProperty>] [-ExceptIfSubjectOrBodyContainsWords <MultiValuedProperty>] [-ExceptIfWithImportance <Low | Normal | High>] [-ExceptIfWithinSizeRangeMaximum <ByteQuantifiedSize>] [-ExceptIfWithinSizeRangeMinimum <ByteQuantifiedSize>] [-ExceptIfWithSensitivity <Normal | Personal | Private | CompanyConfidential>] [-FlaggedForAction <String>] [-ForwardAsAttachmentTo <RecipientIdParameter[]>] [-ForwardTo <RecipientIdParameter[]>] [-From <RecipientIdParameter[]>] [-FromAddressContainsWords <MultiValuedProperty>] [-HasAttachment <$true | $false>] [-HasClassification <MessageClassificationIdParameter[]>] [-HeaderContainsWords <MultiValuedProperty>] [-MarkAsRead <$true | $false>] [-MarkImportance <Low | Normal | High>] [-MessageTypeMatches <AutomaticReply | AutomaticForward | Encrypted | Calendaring | CalendaringResponse | PermissionControlled | Voicemail | Signed | ApprovalRequest | ReadReceipt | NonDeliveryReport>] [-MoveToFolder <MailboxFolderIdParameter>] [-MyNameInCcBox <$true | $false>] [-MyNameInToBox <$true | $false>] [-MyNameInToOrCcBox <$true | $false>] [-MyNameNotInToBox <$true | $false>] [-Priority <Int32>] [-ReceivedAfterDate <ExDateTime>] [-ReceivedBeforeDate <ExDateTime>] [-RecipientAddressContainsWords <MultiValuedProperty>] [-RedirectTo <RecipientIdParameter[]>] [-SendTextMessageNotificationTo <MultiValuedProperty>] [-SentOnlyToMe <$true | $false>] [-SentTo <RecipientIdParameter[]>] [-StopProcessingRules <$true | $false>] [-SubjectContainsWords <MultiValuedProperty>] [-SubjectOrBodyContainsWords <MultiValuedProperty>] [-WithImportance <Low | Normal | High>] [-WithinSizeRangeMaximum <ByteQuantifiedSize>] [-WithinSizeRangeMinimum <ByteQuantifiedSize>] [-WithSensitivity <Normal | Personal | Private | CompanyConfidential>] <COMMON PARAMETERS>
New-InboxRule -FromMessageId <MailboxStoreObjectIdParameter> -ValidateOnly <SwitchParameter> <COMMON PARAMETERS>
COMMON PARAMETERS: [-AlwaysDeleteOutlookRulesBlob <SwitchParameter>] [-Confirm [<SwitchParameter>]] [-DomainController <Fqdn>] [-ExceptIfFromSubscription <AggregationSubscriptionIdentity[]>] [-Force <SwitchParameter>] [-FromSubscription <AggregationSubscriptionIdentity[]>] [-Mailbox <MailboxIdParameter>] [-Organization <OrganizationIdParameter>] [-WhatIf [<SwitchParameter>]]

This example raises the message importance to High if the mailbox owner is in the To field. In addition, the message is flagged for action.

New-InboxRule "CheckActionRequired" -MyNameInToBox $true -FlaggedForAction Any -MarkImportance "High"

The New-InboxRule cmdlet exposes rule predicates and actions, in addition to the parameters such as a rule name and the mailbox identity, required to create an Inbox rule.

ImportantImportant:
When you create, modify, remove, enable, or disable an Inbox rule on Microsoft Exchange Server 2013, any client-side rules created by Microsoft Outlook are removed.

Predicate parameters used for conditions, such as SubjectOrBodyContainsWords, also have an exception parameter. When conditions specified in an exception are matched, the rule isn't applied to the message. Exception parameters begin with ExceptIf. For example, the exception parameter for SubjectOrBodyContainsWords is ExceptIfSubjectOrBodyContainsWords.

You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Inbox rules" entry in the Recipients permissions topic.

 

Parameter Required Type Description

FromMessageId

Required

Microsoft.Exchange.Configuration.Tasks.MailboxStoreObjectIdParameter

The FromMessageId parameter specifies a message ID to create an Inbox rule based on the properties of that message. You must specify the Base64-encoded StoreObjectId of the message. Valid values include one of the following:

  • MailboxId\StoreObjectId

  • StoreObjectId

When you create an Inbox rule by specifying the FromMessageId parameter, the following properties of that message are used to create the rule:

  • Subject   The message subject is added to the SubjectContainsWords property of the rule.

  • From   The message sender is added to the From property of the rule.

  • To and Ccrecipients   Recipients in the To and Cc fields of the message are added to the SentTo property of the rule.

Name

Required

System.String

The Name parameter specifies a name for the Inbox rule being created.

ValidateOnly

Required

System.Management.Automation.SwitchParameter

The ValidateOnly switch tells the cmdlet to evaluate the conditions and requirements necessary to perform the operation and then reports whether the operation will succeed or fail. No changes are made when the ValidateOnly switch is used.

AlwaysDeleteOutlookRulesBlob

Optional

System.Management.Automation.SwitchParameter

The AlwaysDeleteOutlookRulesBlob parameter suppresses a warning that end users or administrators get if they use Outlook Web App or Windows PowerShell to modify Inbox rules.

ApplyCategory

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ApplyCategory parameter specifies one or more categories to apply to a message.

BodyContainsWords

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The BodyContainsWords parameter specifies one or more words or phrases to check the message body for. If phrases contain a space, you must enclose it in quotation marks ("). Use a comma to separate phrases.

Confirm

Optional

System.Management.Automation.SwitchParameter

The Confirm switch can be used to suppress the confirmation prompt that appears by default when this cmdlet is run. To suppress the confirmation prompt, use the syntax -Confirm:$False. You must include a colon ( : ) in the syntax.

CopyToFolder

Optional

Microsoft.Exchange.Configuration.Tasks.MailboxFolderIdParameter

The CopyToFolder parameter specifies the name of an existing mailbox folder to copy the message to.

DeleteMessage

Optional

System.Boolean

The DeleteMessage parameter specifies whether the message is sent to the Deleted Items folder. If set to $true, the message is sent to the Deleted Items folder.

DomainController

Optional

Microsoft.Exchange.Data.Fqdn

This parameter is available only in on-premises Exchange 2013.

The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.

ExceptIfBodyContainsWords

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExceptIfBodyContainsWords parameter specifies one or more words or phrases to check the message body for. If the message body contains the specified words or phrases, the Inbox rule action isn't applied.

ExceptIfFlaggedForAction

Optional

System.String

The ExceptIfFlaggedForAction parameter specifies one or more message flags for which to check. You can use the following values:

  • Any

  • Call

  • DoNotForward

  • FollowUp

  • ForYourInformation

  • Forward

  • NoResponseNecessary

  • Read

  • Reply

  • ReplyToAll

  • Review

If the requested action in the message matches the requested action specified in this parameter, the Inbox rule action isn't applied.

ExceptIfFrom

Optional

Microsoft.Exchange.Configuration.Tasks.RecipientIdParameter[]

The ExceptIfFrom parameter specifies a recipient to check in the From field of the message. If the message sender matches the senders specified in this parameter, the Inbox rule action isn't applied.

ExceptIfFromAddressContainsWords

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExceptIfFromAddressContainsWords parameter specifies one or more words to check in the sender's address. If the sender's address contains the specified words, the Inbox rule action isn't applied to the message.

ExceptIfFromSubscription

Optional

Microsoft.Exchange.Transport.Sync.Common.Subscription.AggregationSubscriptionIdentity[]

This parameter is available only in the cloud-based service.

The ExceptIfFromSubscription parameter specifies an exception when a message is received from a POP, IMAP, or Hotmail subscription.

ExceptIfHasAttachment

Optional

System.Boolean

The ExceptIfHasAttachment parameter specifies whether the rule should apply to messages with attachments. Valid values include $true and $false. We recommend that you set the value to $true.

If the ExceptIfHasAttachment parameter is set to $true and the message has an attachment, the Inbox rule action isn't applied.

ExceptIfHasClassification

Optional

Microsoft.Exchange.Configuration.Tasks.MessageClassificationIdParameter[]

The ExceptIfHasClassification parameter checks the message for the specified classification name. Use the Get-MessageClassification cmdlet to retrieve a list of classifications defined in the organization.

If the message classification matches the classification specified in this parameter, the Inbox rule action isn't applied.

ExceptIfHeaderContainsWords

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExceptIfHeaderContainsWords parameter specifies one or more words to check for in the specified message header.

If the message header contains the words specified in this parameter, the Inbox rule action isn't applied.

ExceptIfMessageTypeMatches

Optional

Microsoft.Exchange.Data.Storage.InboxRuleMessageType

The ExceptIfMessageTypeMatches parameter specifies a message type. You can use the following values:

  • AutomaticReply

  • AutomaticForward

  • Encrypted

  • Calendaring

  • CalendaringResponse

  • PermissionControlled

  • Voicemail

  • Signed

  • ApprovalRequest

  • ReadReceipt

  • NonDeliveryReport

If the message type equals one of the preceding values, the Inbox rule action isn't applied.

ExceptIfMyNameInCcBox

Optional

System.Boolean

The ExceptIfMyNameInCcBox parameter specifies that the Cc field of messages be checked for the mailbox owner's address.

This parameter accepts $true or $false.

If the name of the recipient whose Inbox is being edited is in the Cc box, the Inbox rule action isn't applied.

ExceptIfMyNameInToBox

Optional

System.Boolean

The ExceptIfMyNameInToBox parameter specifies that the To field of messages be checked for the mailbox owner's address.

If the name of the recipient whose Inbox is being edited is in the To box, the Inbox rule action isn't applied.

This parameter accepts $true or $false.

ExceptIfMyNameInToOrCcBox

Optional

System.Boolean

The ExceptIfMyNameInToOrCcBox parameter specifies that the To or Cc fields of messages be checked for the mailbox owner's address.

If the name of the recipient whose Inbox is being edited is in the To or Cc box, the Inbox rule action isn't applied.

This parameter accepts $true or $false.

ExceptIfMyNameNotInToBox

Optional

System.Boolean

The ExceptIfMyNameNotInToBox parameter matches messages where the mailbox owner isn't addressed in the To field of the message.

If the name of the recipient whose Inbox is being edited is not in the To box, the Inbox rule action isn't applied.

This parameter accepts $true or $false.

ExceptIfReceivedAfterDate

Optional

Microsoft.Exchange.ExchangeSystem.ExDateTime

The ExceptIfReceivedAfterDate parameter specifies to check for messages received after the specified date.

Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".

If the message was received after the date specified in this parameter, the Inbox rule action isn't applied.

ExceptIfReceivedBeforeDate

Optional

Microsoft.Exchange.ExchangeSystem.ExDateTime

The ExceptIfReceivedBeforeDate parameter specifies to check for messages received before the specified date.

Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".

If the message was received before the time specified in this parameter, the Inbox rule action isn't applied.

ExceptIfRecipientAddressContainsWords

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExceptIfRecipientAddressContainsWords parameter specifies one or more words to check in the message recipient's address.

If the recipient address contains one or more words specified in this parameter, the Inbox rule action isn't applied.

ExceptIfSentOnlyToMe

Optional

System.Boolean

The ExceptIfSentOnlyToMe parameter specifies to check for messages where the mailbox owner is the only recipient.

This parameter accepts $true or $false.

If the message is only sent to the recipient whose Inbox rule is being edited, the Inbox rule action isn't applied.

ExceptIfSentTo

Optional

Microsoft.Exchange.Configuration.Tasks.RecipientIdParameter[]

The ExceptIfSentTo parameter specifies to check message recipients for the recipient specified.

If the message was sent to the recipient specified in this parameter, the Inbox rule action isn't applied.

ExceptIfSubjectContainsWords

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExceptIfSubjectContainsWords parameter specifies one or more words or phrases to check in the message subject.

If the message subject contains one or more words or phrases specified in this parameter, the Inbox rule action isn't applied.

ExceptIfSubjectOrBodyContainsWords

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExceptIfSubjectOrBodyContainsWords parameter specifies one or more words or phrases to check in the message subject or body.

If the message subject or body contains one or more of the words or phrases specified in this parameter, the Inbox rule action isn't applied.

ExceptIfWithImportance

Optional

Microsoft.Exchange.Data.Storage.Importance

The ExceptIfWithImportance parameter specifies a message importance level. Valid values include one of the following:

  • Low

  • Normal

  • High

If the message importance matches the importance specified in this parameter, the Inbox rule action isn't applied.

ExceptIfWithinSizeRangeMaximum

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

The ExceptIfWithinSizeRangeMaximum parameter specifies the maximum message size. When using this parameter, you must also specify the minimum message size value using the ExceptIfWithinSizeRangeMinimum parameter.

If the message size exceeds the maximum value specified in this parameter, the Inbox rule action isn't applied.

ExceptIfWithinSizeRangeMinimum

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

The ExceptIfWithinSizeRangeMinimum parameter specifies the minimum message size. When using this parameter, you must also specify a maximum message size value using the ExceptIfWithinSizeRangeMaximum parameter.

If the message size is smaller than the minimum value specified in this parameter, the Inbox rule action isn't applied.

ExceptIfWithSensitivity

Optional

Microsoft.Exchange.Data.Storage.Sensitivity

The ExceptIfWithSensitivity parameter specifies a message sensitivity level. You can use the following values:

  • Normal

  • Personal

  • Private

  • CompanyConfidential

If the sensitivity matches the sensitivity value specified in this parameter, the Inbox rule action isn't applied.

FlaggedForAction

Optional

System.String

The FlaggedForAction parameter specifies one or more message flags for which to check. Values include:

  • Any

  • Call

  • DoNotForward

  • FollowUp

  • ForYourInformation

  • Forward

  • NoResponseNecessary

  • Read

  • Reply

  • ReplyToAll

  • Review

Force

Optional

System.Management.Automation.SwitchParameter

The Force switch specifies whether the command suppresses the confirmation prompt produced if rules created by Microsoft Outlook exist on the mailbox. When taking an action using Inbox rules on Exchange 2013, any client-side rules are removed.

ForwardAsAttachmentTo

Optional

Microsoft.Exchange.Configuration.Tasks.RecipientIdParameter[]

The ForwardAsAttachmentTo parameter specifies a recipient to forward the message to as an attachment.

ForwardTo

Optional

Microsoft.Exchange.Configuration.Tasks.RecipientIdParameter[]

The ForwardTo parameter specifies a recipient to forward the message to.

From

Optional

Microsoft.Exchange.Configuration.Tasks.RecipientIdParameter[]

The From parameter specifies the identity of the sender as a rule condition.

FromAddressContainsWords

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The FromAddressContainsWords parameter specifies one or more words to check in the From field of the message.

FromSubscription

Optional

Microsoft.Exchange.Transport.Sync.Common.Subscription.AggregationSubscriptionIdentity[]

This parameter is available only in the cloud-based service.

The FromSubscription parameter specifies the condition when a message is received from a POP, IMAP, or Hotmail subscription.

HasAttachment

Optional

System.Boolean

The HasAttachment parameter specifies whether to check for messages with attachments.

HasClassification

Optional

Microsoft.Exchange.Configuration.Tasks.MessageClassificationIdParameter[]

The HasClassification parameter checks messages for the specified message classification.

HeaderContainsWords

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The HeaderContainsWords parameter specifies one or more words to match in the specified message header.

Mailbox

Optional

Microsoft.Exchange.Configuration.Tasks.MailboxIdParameter

The Mailbox parameter specifies the identity of the mailbox for which the rule is being created. The following values can be used:

  • GUID

  • Distinguished name (DN)

  • Domain\Account

  • User principal name (UPN)

  • LegacyExchangeDN

  • SmtpAddress

  • Alias

MarkAsRead

Optional

System.Boolean

The MarkAsRead parameter specifies whether to mark the message as read. When set to $true, the MarkAsRead parameter marks the message as read.

MarkImportance

Optional

Microsoft.Exchange.Data.Storage.Importance

The MarkImportance parameter specifies that the message importance be marked with one of the following values:

  • Low

  • Normal

  • High

MessageTypeMatches

Optional

Microsoft.Exchange.Data.Storage.InboxRuleMessageType

The MessageTypeMatches parameter specifies a message type. You can use the following values:

  • AutomaticReply

  • AutomaticForward

  • Encrypted

  • Calendaring

  • CalendaringResponse

  • PermissionControlled

  • Voicemail

  • Signed

  • ApprovalRequest

  • ReadReceipt

  • NonDeliveryReport

MoveToFolder

Optional

Microsoft.Exchange.Configuration.Tasks.MailboxFolderIdParameter

The MoveToFolder parameter specifies an existing mailbox folder to which the message is copied.

MyNameInCcBox

Optional

System.Boolean

The MyNameInCcBox parameter specifies that the mailbox for which the rule is being created should appear in the Cc field of the message. To use this predicate, set the value to $true.

MyNameInToBox

Optional

System.Boolean

The MyNameInToBox parameter specifies that the mailbox for which the rule is being created should appear in the To field of the message. To use this predicate, set the value to $true.

MyNameInToOrCcBox

Optional

System.Boolean

The MyNameInToOrCcBox parameter specifies that the mailbox for which the rule is being created should appear in the To or Cc fields of the message. To add this condition, set the value to $true.

MyNameNotInToBox

Optional

System.Boolean

The MyNameNotInToBox parameter checks that the mailbox owner's name isn't in the To box. We recommend that you set the value to $true to use this predicate.

Organization

Optional

Microsoft.Exchange.Configuration.Tasks.OrganizationIdParameter

This parameter is reserved for internal Microsoft use.

Priority

Optional

System.Int32

The Priority parameter sets a priority for the Inbox rule.

ReceivedAfterDate

Optional

Microsoft.Exchange.ExchangeSystem.ExDateTime

The ReceivedAfterDate parameter specifies a date. The rule is applied to messages received after the specified date.

Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".

ReceivedBeforeDate

Optional

Microsoft.Exchange.ExchangeSystem.ExDateTime

The ReceivedBeforeDate parameter specifies a date. The rule is applied only to messages received before the specified date.

Use the short date format defined in the Regional Options settings for the computer on which the command is run. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 03/01/2010 to specify March 1, 2010. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, you must enclose the argument in quotation marks ("), for example, "10/05/2010 5:00 PM".

RecipientAddressContainsWords

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The RecipientAddressContainsWords parameter specifies one or more words to check for in a recipient address.

RedirectTo

Optional

Microsoft.Exchange.Configuration.Tasks.RecipientIdParameter[]

The RedirectTo parameter specifies a recipient to redirect the message to.

SendTextMessageNotificationTo

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The SendTextMessageNotificationTo parameter specifies one or more text message recipients to send a notification to.

SentOnlyToMe

Optional

System.Boolean

The SentOnlyToMe parameter specifies whether the mailbox owner is specified as the only recipient. You can use the following values:

  • $true

  • $false

SentTo

Optional

Microsoft.Exchange.Configuration.Tasks.RecipientIdParameter[]

The SentTo parameter specifies the identity of a recipient as a condition.

StopProcessingRules

Optional

System.Boolean

The StopProcessingRules parameter specifies that Exchange stop processing additional rules if the conditions of this Inbox rule are met.

SubjectContainsWords

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The SubjectContainsWords parameter specifies one or more keywords to be matched in the subject field of a message.

SubjectOrBodyContainsWords

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The SubjectOrBodyContainsWords parameter specifies one or more words to be matched in the message subject or body.

WhatIf

Optional

System.Management.Automation.SwitchParameter

The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.

WithImportance

Optional

Microsoft.Exchange.Data.Storage.Importance

The WithImportance parameter checks messages with the specified importance level. You can use the following values:

  • High

  • Normal

  • Low

WithinSizeRangeMaximum

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

The WithinSizeRangeMaximum parameter specifies the maximum message size. When using this parameter, you must also specify a minimum message size value using the WithinSizeRangeMinimum parameter.

WithinSizeRangeMinimum

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

The WithinSizeRangeMinimum parameter specifies the minimum message size. When using this parameter, you must also specify a maximum message size value using the WithinSizeRangeMaximum parameter.

WithSensitivity

Optional

Microsoft.Exchange.Data.Storage.Sensitivity

The WithSensitivity parameter specifies a message sensitivity level. Valid values include one of the following:

  • Normal

  • Personal

  • Private

  • CompanyConfidential

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn’t accept input data.

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn’t return data.

 
Was this page helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft