Export (0) Print
Expand All

Event ID 2 — TPM Driver Operation

Updated: December 16, 2008

Applies To: Windows Server 2008 R2

red

This version of Windows includes a device driver that allows the TPM Base Service (TBS) to communicate with and share the use of a Trusted Platform Module chip in the computer. Any failures in communication with the TPM or unexpected results cause the TPM driver or the TBS to log event messages.

Note: The BitLocker Drive Encryption feature uses the TPM by default.

Event Details

Product: Windows Operating System
ID: 2
Source: TPM
Version: 6.1
Symbolic Name: TPM_SELF_TEST_FAILED
Message: The TPM self test command failed.

Resolve

Repair or replace hardware components

By default, BitLocker is configured to use the Trusted Platform Module (TPM), a hardware component in your computer. The TPM version must be version 1.2, as defined in specifications created by the Trusted Computing Group. For BitLocker to operate correctly, the TPM must respond as expected.

Because the TPM is a hardware device, contact your hardware supplier or hardware support team to resolve this issue.

Verify

In order for the TPM driver to function correctly, the TPM must be correctly recognized by Windows.

To perform these procedures, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To verify that the TPM is correctly recognized by Windows:

  1. Open Device Manager.
  2. Expand Security Devices.
  3. If the Trusted Platform Module version 1.2 is not present under Security Devices, or if Security Devices is not shown as a category, your computer might not have a TPM version 1.2, or the computer is unable to recognize the TPM.
  4. Right-click Trusted Platform Module 1.2, and then click Properties.
  5. In the Trusted Platform Module 1.2 Properties window, look at the device status on the General tab. The status should indicate "This device is working properly."

If the TPM is correctly recognized by Windows, then you can also verify that the TPM driver is operating correctly.

To verify that the TPM driver is operating correctly:

  1. Click Start, type tpm.msc in the Start Search box, and then press ENTER.
  2. If the User Account Control window appears, click Continue.
  3. In the TPM Management on Local Computer window, examine the Status section. The status should indicate "The TPM is on and ownership has been taken."

Note: Other application software may also make use of the TPM driver. Consult the documentation supplied with each application for steps to verify the correct operation.

Related Management Information

TPM Driver Operation

Core Security

Was this page helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft