Export (0) Print
Expand All
Related Help Topics
Loading
No resources found.
Related Blog Articles
Loading
No resources found.
Expand Minimize
1 out of 5 rated this helpful - Rate this topic

New-EcpVirtualDirectory

Exchange 2010
 

Applies to: Exchange Server 2010 SP3, Exchange Server 2010 SP2

Topic Last Modified: 2012-11-16

Use the New-EcpVirtualDirectory cmdlet to create an Exchange Control Panel virtual directory. This is a command that Microsoft Exchange Server 2010 Setup runs when you install Exchange 2010 in your organization.


New-EcpVirtualDirectory [-AppPoolId <String>] [-Confirm [<SwitchParameter>]] [-DomainController <Fqdn>] [-ExtendedProtectionFlags <MultiValuedProperty>] [-ExtendedProtectionSPNList <MultiValuedProperty>] [-ExtendedProtectionTokenChecking <None | Allow | Require>] [-ExternalUrl <Uri>] [-InternalUrl <Uri>] [-Path <String>] [-Server <ServerIdParameter>] [-WebSiteName <String>] [-WhatIf [<SwitchParameter>]]

You should only need to run this command in specific troubleshooting scenarios.

You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Exchange Control Panel virtual directory settings" entry in the Client Access Permissions topic.

 

Parameter Required Type Description

AppPoolId

Optional

System.String

The AppPoolId parameter sets the Internet Information Services (IIS) application pool in which the Exchange Control Panel virtual directory runs. We recommend that you leave this parameter at its default setting.

Confirm

Optional

System.Management.Automation.SwitchParameter

The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.

DomainController

Optional

Microsoft.Exchange.Data.Fqdn

The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.

ExtendedProtectionFlags

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExtendedProtectionFlags parameter is used to customize the options you use if you're using Extended Protection for Authentication. The possible values are:

  • None   Default setting.
  • Proxy   Specifies that a proxy is terminating the SSL channel. A Service Principal Name (SPN) must be registered in the ExtendedProtectionSPNList parameter if proxy mode is configured.
  • ProxyCoHosting   Specifies that both HTTP and HTTPS traffic may be accessing the Client Access server and that a proxy is located between at least some of the clients and the Client Access server.
  • AllowDotlessSPN   Specifies whether you want to support valid SPNs that aren't in the fully qualified domain name (FQDN) format, for example ContosoMail. You specify valid SPNs with the ExtendedProtectionSPNList parameter. This option makes extended protection less secure because dotless certificates aren't unique, so it isn't possible to ensure that the client-to-proxy connection was established over a secure channel.
  • NoServiceNameCheck   Specifies that the SPN list won't be checked to validate a channel binding token. This option makes Extended Protection for Authentication less secure. We generally don't recommend this setting.

ExtendedProtectionSPNList

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExtendedProtectionSPNList parameter specifies a list of valid Service Principal Names (SPNs) if you're using Extended Protection for Authentication on the specified virtual directory.

The possible values are:

  • Null   This is the default value.
  • Single SPN or comma delimited list of valid SPNs   By default, you must specify the fully qualified domain name (FQDN) (for example mail.contoso.com) for each SPN. If you want to add an SPN that's not an FQDN (for example, ContosoMail), you must also use the ExtendedProtectionTokenChecking parameter with the AllowDotlessSPN value. You specify the domain in SPN format. The SPN format is <protocol>/<FQDN>. For example, a valid entry could be HTTP/mail.contoso.com.

ExtendedProtectionTokenChecking

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.ExtendedProtectionTokenCheckingMode

The ExtendedProtectionTokenChecking parameter defines how you want to use Extended Protection for Authentication on the specified Exchange virtual directory. Extended Protection for Authentication isn't enabled by default. The available settings are:

  • None   Extended Protection for Authentication won't be used. Connections between the client and Exchange won't use Extended Protection for Authentication on this virtual directory. This is the default setting.
  • Allow   Extended Protection for Authentication will be used for connections between the client and Exchange on this virtual directory if both the client and server support Extended Protection for Authentication. Connections that don't support Extended Protection for Authentication on the client and server will work, but may not be as secure as a connection using Extended Protection for Authentication.
noteNote:
If you have a proxy server between the client and the Client Access server that's configured to terminate the client-to-proxy SSL channel, you must also configure one or more Service Principal Names (SPNs) by using the ExtendedProtectionSPNList parameter.
  • Require   Extended Protection for Authentication will be used for all connections between clients and Exchange servers for this virtual directory. If either the client or server doesn't support Extended Protection for Authentication, the connection between the client and server will fail. If you set this option, you must also set a value for the ExtendedProtectionSPNList parameter.
noteNote:
If you have a proxy server between the client and the Client Access server that's configured to terminate the client-to-proxy SSL channel, you must also configure one or more SPNs using the parameter ExtendedProtectionSPNList.

To learn more about Extended Protection for Authentication, see Understanding Extended Protection for Authentication.

ExternalUrl

Optional

System.Uri

The ExternalUrl parameter specifies the host name used to connect to the server running Exchange from outside the firewall. This setting is important when Secure Sockets Layer (SSL) is used. This parameter must be set to allow the Autodiscover service to return the URL for the Exchange Control Panel virtual directory.

InternalUrl

Optional

System.Uri

The InternalUrl parameter specifies the host name used to connect to the server running Exchange from inside the firewall. This setting is important when SSL is used. This parameter must be set to allow the Autodiscover service to return the URL for the Exchange Control Panel virtual directory.

Path

Optional

System.String

The Path parameter sets the file system path of the Exchange Control Panel virtual directory. This parameter should be used with care and only when you must use a different file system path than the default.

Server

Optional

Microsoft.Exchange.Configuration.Tasks.ServerIdParameter

The Server parameter specifies the name or GUID of the server that hosts the Exchange Control Panel virtual directories that you want to create. You can't create an Exchange Control Panel virtual directory remotely. You can only create an Exchange Control Panel virtual directory on the local computer.

WebSiteName

Optional

System.String

The WebSiteName parameter specifies the name of the IIS Web site under which the Exchange Control Panel virtual directory is created.

WhatIf

Optional

System.Management.Automation.SwitchParameter

The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn’t accept input data.

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn’t return data.

This example creates the Exchange Control Panel virtual directory named ecp that's located on the default IIS Web site on the Exchange server Server01.

New-EcpVirtualDirectory -Identity "Server01\ecp (default Web site)"
 © 2010 Microsoft Corporation. All rights reserved.
Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft. All rights reserved.