Export (0) Print
Expand All

Checklist: Installing and Configuring an RRAS Router

Applies To: Windows Server 2008 R2

 

Task Reference

Review key concepts. Decide which protocols and routing features of RRAS you want to use.

Routing

IPv4 Routing (http://go.microsoft.com/fwlink/?linkid=140614)

IPv6 Routing (http://go.microsoft.com/fwlink/?linkid=140615)

Static Routing (http://go.microsoft.com/fwlink/?linkid=140617)

Routing Information Protocol for IPv4 (http://go.microsoft.com/fwlink/?linkid=140716)

Network Address Translation (http://go.microsoft.com/fwlink/?linkid=140619)

Demand-Dial Routing (http://go.microsoft.com/fwlink/?linkid=140603)

Configure TCP/IP on the network adapters of the RRAS server.

Configure TCP/IP on the RRAS Server

Install RRAS.

Install RRAS

Enable RRAS and configure it as a router

Enable RRAS as a LAN and WAN Router

(Optional) Design and deploy static IP routing.

Create a static route

(Optional) Design and deploy Routing Information Protocol for IP.

Enable and Configure RIP

(Optional) Add and configure the DHCP Relay Agent.

Configure the IPv4 DHCP Relay Agent

Configure the IPv6 DHCP Relay Agent

(Optional) Configure IP multicast support.

IPv4 Multicast Routing (http://go.microsoft.com/fwlink/?linkid=140717)

(Optional) Design and deploy network address translation (NAT).

Enable and Configure NAT

(Optional) Configure IP packet filters.

Configure Static Packet Filters (http://go.microsoft.com/fwlink/?linkid=140713)

(Optional) Design and deploy demand-dial routing.

Create a Demand-Dial Interface

Additional references

Was this page helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft