Export (0) Print
Expand All
2 out of 5 rated this helpful - Rate this topic

Return Codes

Published: June 17, 2009

Updated: June 29, 2010

Applies To: Windows 7

This topic discusses Windows® User State Migration Tool (USMT) 4.0 return codes and error messages, and it provides a table listing the most common return codes, with their associated mitigation steps, encountered in log files.

In This Topic

USMT Return Codes for the ScanState and LoadState tools

If you encounter an error in your USMT 4.0 migration, you can use return codes and the more specific information provided in the associated USMT error messages to troubleshoot the issue and to identify mitigation steps.

Return codes are grouped into the following broad categories that describe their area of error reporting:

  • Success or User Cancel

  • Invalid Command Lines

  • Setup and Initialization

  • Non-fatal Errors

  • Fatal Errors

As a best practice, we recommend that you set the highest verbosity level, /v:13, on the ScanState and LoadState command lines, so that the most detailed reporting is available in the ScanState and LoadState logs.

USMT Error Messages for the ScanState and LoadState tools

Error messages provide more detailed information about the migration problem than the associated return code. For example, the ScanState and LoadState tools might return a code of "11 USMT_INVALID_PARAMETERS" and a related error message that reads "/key and /keyfile both specified". The error message is displayed at the command prompt and is identified in the ScanState and LoadState log files to help you determine why the return code was received. You can obtain more information about any listed Win32® system error codes by typing net helpmsg on the command line and, then typing the error code number. For more information about System Error Codes, see this Microsoft Web site.

Troubleshooting Return Codes and Error Messages

The following table lists each return code by numeric value, along with the associated error messages and suggested troubleshooting actions.

 

Return code value Return code Error message Troubleshooting, mitigation, workarounds Category

0

USMT_SUCCESS

Successful run

Not applicable

Success or Cancel

1

USMT_DISPLAY_HELP

Command line help requested

Not applicable

Success or Cancel

2

USMT_STATUS_CANCELED

User chose to cancel (such as pressing CTRL+C)

Not applicable

Success or Cancel

Gather was aborted because of an EFS file

Not applicable

11

USMT_INVALID_PARAMETERS

Undefined or incomplete command line option

Review ScanState log or LoadState log for details about command-line errors.

Invalid Command Lines

An option argument is missing

Review ScanState log or LoadState log for details about command-line errors.

Command line option is not valid

Review ScanState log or LoadState log for details about command-line errors.

The store parameter is required but not specified

Review ScanState log or LoadState log for details about command-line errors.

An option is specified more than once and is ambiguous

Review ScanState log or LoadState log for details about command-line errors.

Command line arguments are required. Specify /? for options.

Review ScanState log or LoadState log for details about command-line errors.

Use /nocompress, or provide an XML file path with /p"pathtoafile" to get a compressed store size estimate

Review ScanState log or LoadState log for details about command-line errors.

The estimate output path is invalid for /p

Review ScanState log or LoadState log for details about command-line errors.

EFS parameter specified is not valid for /efs

Review ScanState log or LoadState log for details about command-line errors.

The source-to-target user account mapping is invalid for /mu

Review ScanState log or LoadState log for details about command-line errors.

The source-to-target domain mapping is invalid for /md

Review ScanState log or LoadState log for details about command-line errors.

User exclusion argument is invalid

Review ScanState log or LoadState log for details about command-line errors.

/lae is only used with /lac

Review ScanState log or LoadState log for details about command-line errors.

/all conflicts with /ui, /ue or /ue

Review ScanState log or LoadState log for details about command-line errors.

/encrypt can't be used with /nocompress

Review ScanState log or LoadState log for details about command-line errors.

/key and /keyfile both specified

Review ScanState log or LoadState log for details about command-line errors.

File argument is invalid for /genconfig

Review ScanState log or LoadState log for details about command-line errors.

/genconfig can't be used with most other options

Review ScanState log or LoadState log for details about command-line errors.

File argument is invalid for /genmigxml

Review ScanState log or LoadState log for details about command-line errors.

/genmigxml can't be used with most other options

Review ScanState log or LoadState log for details about command-line errors.

/encrypt requires /key or /keyfile

Review ScanState log or LoadState log for details about command-line errors.

/key or /keyfile used without enabling encryption

Review ScanState log or LoadState log for details about command-line errors.

/hardlink requires /nocompress

Review ScanState log or LoadState log for details about command-line errors.

/offlinewindir requires a valid path to offline windows folder

Review ScanState log or LoadState log for details about command-line errors.

/offline requires a valid path to an XML file describing offline paths

Review ScanState log or LoadState log for details about command-line errors.

Verbosity level must be specified as a sum of the desired log options: Verbose (0x01), Record Objects (0x04), Echo to debug port (0x08)

Review ScanState log or LoadState log for details about command-line errors.

Retry argument must be an integer

Review ScanState log or LoadState log for details about command-line errors.

Wait delay argument must be an integer

Review ScanState log or LoadState log for details about command-line errors.

The /targetxp option is only available for Windows XP

Review ScanState log or LoadState log for details about command-line errors.

The /efs:hardlink requires /hardlink

Review ScanState log or LoadState log for details about command-line errors.

List file path argument is invalid for /listfiles

Review ScanState log or LoadState log for details about command-line errors.

/listfiles cannot be used with /p

Review ScanState log or LoadState log for details about command-line errors.

By default /auto selects all users and uses the highest log verbosity level. Switches like /all, /ui, /ue, /v are not allowed.

Review ScanState log or LoadState log for details about command-line errors.

/auto expects an optional parameter for the script folder

Review ScanState log or LoadState log for details about command-line errors.

Volume shadow copy feature is not supported with a hardlink store

Review ScanState log or LoadState log for details about command-line errors.

Specified encryption algorithm is not supported

Review ScanState log or LoadState log for details about command-line errors.

Settings store argument specified is invalid

Review ScanState log or LoadState log for details about command-line errors. Make sure that the store path is accessible and that the proper permission levels are set.

12

USMT_ERROR_OPTION_PARAM_TOO_LARGE

Command line arguments cannot exceed 256 characters

Review ScanState log or LoadState log for details about command-line errors.

Invalid Command Lines

A store path exceeds MAX_PATH

Review ScanState log or LoadState log for details about command-line errors.

13

USMT_INIT_LOGFILE_FAILED

Log path argument is invalid for /l

When /l is specified in the ScanState command line, USMT validates the path. Verify that the drive and other information, for example file system characters, are correct.

Invalid Command Lines

14

USMT_ERROR_USE_LAC

Unable to create a local account because /lac was not specified

When creating local accounts, the command-line options /lac and /lae should be used.

Invalid Command Lines

26

USMT_INIT_ERROR

Software malfunction or unknown exception

Check all loaded .xml files for errors, common error when using /I to load the Config.xml file.

Setup and Initialization

Multiple Windows installations found

Listfiles.txt could not be created. Verify that the location you specified for the creation of this file is valid.

Unable to find a valid Windows directory to proceed with requested offline operation \r\n\t

Verify that the offline input file is present and that it has valid entries. USMT could not find valid offline operating system. Verify your offline directory mapping.

27

USMT_INVALID_STORE_LOCATION

Invalid store path; check the store parameter and/or file system permissions

Make sure that the store path is accessible and that the proper permission levels are set.

Setup and Initialization

A store path is missing or has incomplete data

Make sure that the store path is accessible and that the proper permission levels are set.

The store save location is read-only or does not support a requested storage option

Make sure that the store path is accessible and that the proper permission levels are set.

An inappropriate device such as a floppy disk was specified for the store

Make sure that the store path is accessible and that the proper permission levels are set.

The store path holds a store incompatible with the current USMT version

Make sure that the store path is accessible and that the proper permission levels are set.

An error occurred during store creation

Make sure that the store path is accessible and that the proper permission levels are set. Specify /o to overwrite an existing intermediate or migration store.

The file layout and/or file content is not recognized as a valid store

Make sure that the store path is accessible and that the proper permission levels are set. Specify /o to overwrite an existing intermediate or migration store.

A store path can't be used because an existing store exists; specify /o to overwrite

Specify /o to overwrite an existing intermediate or migration store.

28

USMT_UNABLE_GET_SCRIPTFILES

Script file is invalid for /i

Check all specified migration .xml files for errors. This is a common error when using /I to load the Config.xml file.

Setup and Initialization

Unable to find a script file specified by /i

Verify the location of your script files, and ensure that the command-line options are correct.

29

USMT_FAILED_MIGSTARTUP

Failed to start main processing, look in log for system errors or check the installation

Check the ScanState log file for migration .xml file errors.

Setup and Initialization

Migration failed because of an XML error; look in the log for specific details

Check the ScanState log file for migration .xml file errors.

Another process is preventing migration; only one migration tool can run at a time

Check the ScanState log file for migration .xml file errors.

Unable to automatically map the drive letters to match the online drive letter layout;\r\n\t Use /offline to provide a mapping table

Check the ScanState log file for migration .xml file errors.

A minimum of 250 MB of free space is required for temporary files

Verify that the system meets the minimum temporary disk space requirement of 250 MB. As a workaround, you can set the environment variable USMT_WORKING_DIR=<path> to redirect the temporary files working directory.

31

USMT_UNABLE_FINDMIGUNITS

An error occurred during the discover phase; the log should have more specific information

Check the ScanState log file for migration .xml file errors.

Setup and Initialization

32

USMT_FAILED_SETMIGRATIONTYPE

An error occurred processing the migration system

Check the ScanState log file for migration .xml file errors, or use online Help by typing /? on the command line.

Setup and Initialization

33

USMT_UNABLE_READKEY

Error accessing the file specified by the /keyfile parameter

Check the ScanState log file for migration .xml file errors, or use online Help by typing /? on the command line.

Setup and Initialization

The encryption key must have at least one character

Check the ScanState log file for migration .xml file errors, or use online Help by typing /? on the command line.

34

USMT_ERROR_INSUFFICIENT_RIGHTS

No rights to create user profiles

Log on as Administrator, and run with elevated privileges.

Setup and Initialization

35

USMT_UNABLE_DELETE_STORE

A store path can't be used because it contains data that could not be overwritten

A migration store could not be deleted. If you are using a hardlink migration store you might have a locked file in it. You should manually delete the store, or use usmtutils /rd command to delete the store.

Setup and Initialization

36

USMT_ERROR_UNSUPPORTED_PLATFORM

Compliance check failure; please check the logs for details

Investigate whether there is an active temporary profile on the system.

Setup and Initialization

Use /offline to run gather on this platform

The /offline command was not used while running in Windows PE.

Use of /offline is not supported during apply

The /offline command was not used while running in the Windows Preinstallation Environemtn (Windows PE).

37

USMT_ERROR_NO_INVALID_KEY

The store holds encrypted data but the correct encryption key was not provided

Verify that you have included the correct encryption /key or /keyfile.

Setup and Initialization

38

USMT_ERROR_CORRUPTED_NOTENCRYPTED_STORE

An error occurred during store access

Review ScanState log or LoadState log for details about command-line errors. Make sure that the store path is accessible and that the proper permission levels are set.

Setup and Initialization

39

USMT_UNABLE_TO_READ_CONFIG_FILE

File argument is invalid for /config

Check the command line you used to load the Config.xml file. You can use online Help by typing /? on the command line.

Setup and Initialization

Error reading Config.xml

Review ScanState log or LoadState log for details about command-line errors in the Config.xml file.

40

USMT_ERROR_UNABLE_CREATE_PROGRESS_LOG

Error writing to the progress log

The Progress log could not be created. Verify that the location is valid and that you have write access.

Setup and Initialization

Progress log argument is invalid for /progress

The Progress log could not be created. Verify that the location is valid and that you have write access.

41

USMT_PREFLIGHT_FILE_CREATION_FAILED

Can't overwrite existing file

The Progress log could not be created. Verify that the location is valid and that you have write access.

Setup and Initialization

61

USMT_MIGRATION_STOPPED_NONFATAL

Processing stopped due to an I/O error

USMT exited but can continue with the /c command-line option, with the optional configurable <ErrorControl> section or by using the /vsc command-line option.

Non-fatal Errors

71

USMT_INIT_OPERATING_ENVIRONMENT_FAILED

A Windows Win32 API error occurred

Data transfer has begun, and there was an error during the creation of migration store or during the apply phase. Review the ScanState log or LoadState log for details.

Fatal Errors

An error occurred when attempting to initialize the diagnostic mechanisms such as the log

Data transfer has begun, and there was an error during the creation of migration store or during the apply phase. Review the ScanState log or LoadState log for details.

Failed to record diagnostic information

Data transfer has begun, and there was an error during the creation of migration store or during the apply phase. Review the ScanState log or LoadState log for details.

72

USMT_UNABLE_DOMIGRATION

An error occurred in the gather process

Data transfer has begun, and there was an error during migration-store creation or during the apply phase. Review the ScanState log or LoadState log for details.

Fatal Errors

An error occurred in the apply process

Data transfer has begun, and there was an error during migration-store creation or during the apply phase. Review the ScanState log or LoadState log for details.

An error occurred closing the store

Data transfer has begun, and there was an error during migration-store creation or during the apply phase. Review the ScanState log or LoadState log for details.

Out of disk space while writing the store

Data transfer has begun, and there was an error during migration-store creation or during the apply phase. Review the ScanState log or LoadState log for details.

Out of temporary disk space on the local system

Data transfer has begun, and there was an error during migration-store creation or during the apply phase. Review the ScanState log or LoadState log for details.

UsmtUtils Return Codes

The following table lists each return code by numeric value, along with a description of the code.

 

Return code value Return code Description

0

RESULT_SUCCESS

Deletion finished successfully.

1

RESULT_PARTIAL_SUCCESS

An error occurred but some operations have completed successfully.

2

RESULT_REBOOT_REQUIRED

A reboot is required to complete the deletion.

3

RESULT_REMOVE_ERRORS

An error occurred; no operations have completed successfully.

4

RESULTS_USER_CANCELLED

The operation has been canceled by the user.

13

RESULT_NOT_THERE

The specified store path does not exist.

255

RESULT_HELP

The help information is displayed.

See Also

Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft. All rights reserved.