The User Account Control: Admin Approval Mode for the built-in Administrator account policy setting controls the behavior of Admin Approval Mode for the built-in Administrator account.

The options are:

• Enabled. The built-in Administrator account uses Admin Approval Mode. By default, any operation that requires elevation of privilege will prompt the user to approve the operation.
  
  
• Disabled. (Default) The built-in Administrator account runs all applications with full administrative privilege.
  
  

The User Account Control: Allow UIAccess applications to prompt for elevation without using the secure desktop policy setting controls whether User Interface Accessibility (UIAccess or UIA) programs can automatically disable the secure desktop for elevation prompts used by a standard user.

The options are:

• Enabled. UIA programs, including Windows Remote Assistance, automatically disable the secure desktop for elevation prompts. If you do not disable the User Account Control: Switch to the secure desktop when prompting for elevation policy setting, the prompts appear on the interactive user's desktop instead of the secure desktop.
  
  
• Disabled. (Default) The secure desktop can be disabled only by the user of the interactive desktop or by disabling the User Account Control: Switch to the secure desktop when prompting for elevation policy setting.
  
  

UIA programs are designed to interact with Windows and application programs on behalf of a user. This policy setting allows UIA programs to bypass the secure desktop to increase usability in certain cases; however, allowing elevation requests to appear on the interactive desktop instead of the secure desktop can increase your security risk.

UIA programs must be digitally signed because they must be able to respond to prompts regarding security issues, such as the UAC elevation prompt. By default, UIA programs are run only from the following protected paths:

• …\Program Files, including subfolders
  
  
• …\Program Files (x86), including subfolders for 64-bit versions of Windows
  
  
• …\Windows\System32
  
  

The User Account Control: Only elevate UIAccess applications that are installed in secure locations policy setting disables the requirement to be run from a protected path.

While this policy setting applies to any UIA program, it is primarily used in certain remote assistance scenarios, including the Windows Remote Assistance program in Windows 7.

If a user requests remote assistance from an administrator and the remote assistance session is established, any elevation prompts appear on the interactive user's secure desktop and the administrator's remote session is paused. To avoid pausing the remote administrator's session during elevation requests, the user may select the Allow IT Expert to respond to User Account Control prompts check box when setting up the remote assistance session. However, selecting this check box requires that the interactive user respond to an elevation prompt on the secure desktop. If the interactive user is a standard user, the user does not have the required credentials to allow elevation.

If you enable this policy setting, requests for elevation are automatically sent to the interactive desktop (not the secure desktop) and also appear on the remote administrator's view of the desktop during a remote assistance session. This allows the remote administrator to provide the appropriate credentials for elevation.

This policy setting does not change the behavior of the UAC elevation prompt for administrators.

If you plan to enable this policy setting, you should also review the effect of the User Account Control: Behavior of the elevation prompt for standard users policy setting. If it is configured as Automatically deny elevation requests, elevation requests are not presented to the user.

The User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode policy setting controls the behavior of the elevation prompt for administrators.

The options are:

• Elevate without prompting. Allows privileged accounts to perform an operation that requires elevation without requiring consent or credentials.
  
  

  Note
  Use this option only in the most constrained environments.

• Prompt for credentials on the secure desktop. When an operation requires elevation of privilege, the user is prompted on the secure desktop to enter a privileged user name and password. If the user enters valid credentials, the operation continues with the user's highest available privilege.
  
  
• Prompt for consent on the secure desktop. When an operation requires elevation of privilege, the user is prompted on the secure desktop to select either Permit or Deny. If the user selects Permit, the operation continues with the user's highest available privilege.
  
  
• Prompt for credentials. When an operation requires elevation of privilege, the user is prompted to enter an administrative user name and password. If the user enters valid credentials, the operation continues with the applicable privilege.
  
  
• Prompt for consent. When an operation requires elevation of privilege, the user is prompted to select either Permit or Deny. If the user selects Permit, the operation continues with the user's highest available privilege.
  
  
• Prompt for consent for non-Windows binaries. (Default) When an operation for a non-Microsoft application requires elevation of privilege, the user is prompted on the secure desktop to select either Permit or Deny. If the user selects Permit, the operation continues with the user's highest available privilege.
  
  

The User Account Control: Behavior of the elevation prompt for standard users policy setting controls the behavior of the elevation prompt for standard users.

The options are:

• Automatically deny elevation requests. When an operation requires elevation of privilege, a configurable access denied error message is displayed. An enterprise that is running desktops as standard user may choose this setting to reduce help desk calls.
  
  
• Prompt for credentials on the secure desktop. (Default) When an operation requires elevation of privilege, the user is prompted on the secure desktop to enter a different user name and password. If the user enters valid credentials, the operation continues with the applicable privilege.
  
  
• Prompt for credentials. When an operation requires elevation of privilege, the user is prompted to enter an administrative user name and password. If the user enters valid credentials, the operation continues with the applicable privilege.
  
  

The User Account Control: Detect application installations and prompt for elevation policy setting controls the behavior of application installation detection for the computer.

The options are:

• Enabled. (Default for home) When an application installation package is detected that requires elevation of privilege, the user is prompted to enter an administrative user name and password. If the user enters valid credentials, the operation continues with the applicable privilege.
  
  
• Disabled. (Default for enterprise) Application installation packages are not detected and prompted for elevation. Enterprises that are running standard user desktops and use delegated installation technologies such as Group Policy Software Installation or Systems Management Server (SMS) should disable this policy setting. In this case, installer detection is unnecessary.
  
  

The User Account Control: Only elevate executables that are signed and validated policy setting enforces public key infrastructure (PKI) signature checks for any interactive applications that request elevation of privilege. Enterprise administrators can control which applications are allowed to run by adding certificates to the Trusted Publishers certificate store on local computers.

The options are:

• Enabled. Enforces the PKI certification path validation for a given executable file before it is permitted to run.
  
  
• Disabled. (Default) Does not enforce PKI certification path validation before a given executable file is permitted to run.
  
  

The User Account Control: Only elevate UIAccess applications that are installed in secure locations policy setting controls whether applications that request to run with a User Interface Accessibility (UIAccess) integrity level must reside in a secure location in the file system. Secure locations are limited to the following:

• …\Program Files, including subfolders
  
  
• …\Windows\system32
  
  
• …\Program Files (x86), including subfolders for 64-bit versions of Windows
  
  

Note
Windows enforces a PKI signature check on any interactive application that requests to run with a UIAccess integrity level regardless of the state of this security setting.

The options are:

• Enabled. (Default) If an application resides in a secure location in the file system, it runs only with UIAccess integrity.
  
  
• Disabled. An application runs with UIAccess integrity even if it does not reside in a secure location in the file system.
  
  

The User Account Control: Run all administrators Admin Approval Mode policy setting controls the behavior of all UAC policy settings for the computer. If you change this policy setting, you must restart your computer.

The options are:

• Enabled. (Default) Admin Approval Mode is enabled. This policy must be enabled and related UAC policy settings must also be set appropriately to allow the built-in Administrator account and all other users who are members of the Administrators group to run in Admin Approval Mode.
  
  
• Disabled. Admin Approval Mode and all related UAC policy settings are disabled.
  
  

  Note
  If this policy setting is disabled, the Security Center notifies you that the overall security of the operating system has been reduced.

The User Account Control: Switch to the secure desktop when prompting for elevation policy setting controls whether the elevation request prompt is displayed on the interactive user's desktop or the secure desktop.

The options are:

• Enabled. (Default) All elevation requests go to the secure desktop regardless of prompt behavior policy settings for administrators and standard users.
  
  
• Disabled. All elevation requests go to the interactive user's desktop. Prompt behavior policy settings for administrators and standard users are used.
  
  

When this policy setting is enabled, it overrides the User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode policy setting. The following table describes the behavior of the elevation prompt for each of the administrator policy settings when the User Account Control: Switch to the secure desktop when prompting for elevation policy setting is enabled or disabled.

When this policy setting is enabled, it overrides the User Account Control: Behavior of the elevation prompt for standard users policy setting. The following table describes the behavior of the elevation prompt for each of the standard user policy settings when the User Account Control: Switch to the secure desktop when prompting for elevation policy setting is enabled or disabled.

The User Account Control: Virtualize file and registry write failures to per-user locations policy setting controls whether application write failures are redirected to defined registry and file system locations. This policy setting mitigates applications that run as administrator and write run-time application data to %ProgramFiles%, %Windir%, %Windir%\system32, or HKLM\Software.

The options are:

• Enabled. (Default) Application write failures are redirected at run time to defined user locations for both the file system and registry.
  
  
• Disabled. Applications that write data to protected locations fail.