Walkthrough Guide: Workplace Join with an iOS Device
Published: June 24, 2013
Updated: August 28, 2013
Applies To: Windows Server 2012 R2
This topic demonstrates Workplace Join on an iOS device. You must complete the steps in the Set up the lab environment for AD FS in Windows Server 2012 R2 section before you can try out this walkthrough. You can use the device to access the same company web application that you accessed in Walkthrough Guide: Workplace Join with a Windows Device.
For Workplace Join to succeed, the iOS device must trust the SSL certificate that was used to configure AD FS in Step 2: Configure the Federation Server with Device Registration Service (ADFS1).
In this demonstration, you join the device to the workplace.
Open Safari and navigate to the DRS Over-the-Air Profile endpoint for iOS devices. (https://adf1s.contoso.com/enrollmentserver/otaprofile).
Log on to the web page using a company domain account: firstname.lastname@example.org and password: P@ssword.
You will be prompted to install a profile. On the Install Profile screen, press Install.
When prompted to confirm installation of the profile, press Install Now.
If your device requires a PIN to unlock the device, you will be prompted to enter your PIN.
The profile installation is complete when you see the Profile Installed screen. Press Done.
You should now be back in Safari. You will see a message letting you know that you can close or leave Safari.
|To view or remove the Workplace Join profile, browse to: Settings, General, and click Profiles on your iOS device.|