Export (0) Print
Expand All
5 out of 8 rated this helpful - Rate this topic

Review Prerequisites for Installing Hyper-V Server 2008 R2

Applies To: Microsoft Hyper-V Server 2008 R2

Hyper-V virtualization technology requires specific hardware. You can identify systems that support x64-based architecture and Hyper-V by searching the Windows Server catalog for Hyper-V as an additional qualification (http://go.microsoft.com/fwlink/?LinkId=111228).

Hyper-V Server 2008 R2 has hardware requirements that are similar to the Hyper-V role in Windows Server 2008 R2.

Processor

  • Minimum: An x64-based processor with hardware-assisted virtualization. This is available in processors that include a virtualization option—specifically, processors with Intel Virtualization Technology (Intel VT) or AMD Virtualization (AMD-V) technology.

  • Hardware-enforced Data Execution Prevention (DEP) must be available and enabled. Specifically, you must enable the Intel XD (“execute disable”) bit or the AMD NX (“no execute”) bit.

Memory

  • Minimum: 1 GB RAM; recommended: 2+ GB RAM

  • Maximum: 1 TB

Network adapters

  • Minimum: 1

  • Recommended: 2 or more

Additional considerations

  • The settings for hardware-assisted virtualization and hardware-enforced DEP are available in the BIOS. However, the names of the settings may differ from the names identified previously.

    For more information about whether a specific processor model supports Hyper-V, check with the manufacturer of the computer.

  • If you modify the settings for hardware-assisted virtualization or hardware-enforced DEP, you may need to turn off the power to the computer and then turn it back on. Restarting the computer may not apply the changes to the settings.

Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft. All rights reserved.