Export (0) Print
Expand All
This topic has not yet been rated - Rate this topic

Create a virtualization plan (SharePoint Server 2010)

Published: May 12, 2010

This article describes the planning process to follow in order to successfully deploy Microsoft SharePoint Server 2010 in a virtual environment. Each step in the planning process includes links to the appropriate documentation. It is assumed that you have determined the SharePoint Server 2010 solution that you want to deploy in a virtual environment. On the surface, deploying a SharePoint Server 2010 farm on virtual machines is the same as deploying a farm on physical servers. However, deploying in a virtual environment involves a different level of planning that takes into account the characteristics of Windows Server 2008 Hyper-V technology as well as how virtual machines, the virtual network adapters, and virtual hard disks are implemented on a virtualization server.

Before you start developing your virtualization plan, we recommend that you read the Hyper-V Planning and Deployment Guide (http://go.microsoft.com/fwlink/p/?LinkId=187964).

Detailed information about the following subjects is out-of-scope for this article, but is provided in other articles:

  • Capacity management

  • Security requirements

  • Health and performance monitoring

  • Backup and recovery

A virtual environment consists of two interrelated layers, one physical and one virtual. A configuration change in either layer effects servers in the other layer. This interrelationship becomes evident when you plan for, deploy, and use SharePoint Server 2010 in a virtual environment. For more information, see Virtualization overview.

Create a plan for deploying SharePoint Server 2010 in a virtual environment

You should approach planning for a virtual farm the same way as you would plan for a physical farm. Most, if not all, of the issues and requirements for deploying SharePoint Server 2010 on physical servers apply equally to virtual machines. Any decisions that you make, such as minimum processor or memory requirements, have a direct bearing on number of virtualization hosts required, as well as their ability to adequately support the virtual machines that you identify for the farm.

After you finish planning a physical farm, you have all the information you need to design virtualization architecture. Ideally, this architecture is as close as possible to the final virtualization solution that you intend to put into production. Realistically, the architecture is likely to change as you move through the deployment phase of the system lifecycle. In fact, you may determine that some farm server roles are not good candidates for virtualization.

The key planning steps, tasks, and references are summarized in following the procedure.

To create a virtualization plan

  1. Determine virtualization scope

    Determining the scope of farm virtualization is a key contributing factor to successfully implementing, managing, and evaluating your virtualization project. When determining scope, you have to decide whether you will virtualize some or all of the supporting virtual machine infrastructure.

    Use the following list of tasks to determine the scope of virtualization.

    • Task 1: Identify all the farms that are required to implement your solution. Take into consideration the fact that most solutions have several farm components. For example, an Internet-facing Web portal typically has a publishing farm, an authoring farm and a testing or quality assurance farm.

    • Task 2: For each farm, determine the number of servers that are required as well as the role that each server will have in the farm.

    • Task 3: Identify which farms you want to deploy in in a virtual environment.

    Refining the scope of a solution also refines the scope of a deployment, which makes it easier to implement and manage. For more information, see Plan for sites and solutions (SharePoint Server 2010). In many cases, solutions share common elements; however, each solution may have its own requirements. For more information, see Fundamental site planning (SharePoint Server 2010). The Plan for social computing and collaboration (SharePoint Server 2010) article shows one of the popular solutions.

    note Note:

    Expect to refine the scope of your solution as you move through the phases of deploying your farm in a production environment.

  2. Identify servers to virtualize

    Identify servers that are good candidates for virtualization. From a technical and Microsoft support perspective, all SharePoint servers can be virtualized. The decision to virtualize a particular farm server should be based on:

    • Corporate compliance policies (for example, legal and technical)

    • Benefits derived from server consolidation, such as reduced power consumption and physical space requirements. For more information, see Server virtualization (http://go.microsoft.com/fwlink/p/?LinkId=187965).

    • Capacity requirements (see next planning step)

  3. Identify capacity requirements for each farm server

    Determine the resource requirements for each farm server as if it was a physical server. Take into account specialized server roles, such as hosting Enterprise Search components. You need to specify the amount of resources needed for each of the following server components:

    • Memory

    • Number of processors and minimum clock speed

    • Number and size of hard disks

    • Number of network adapters and their required throughput speed

    Use the resources available at the Capacity Management for SharePoint Server 2010 Resource Center to develop the capacity and performance requirements for your farm.

  4. Determine if virtual machine can meet physical requirements.

    You have to determine whether each virtual machine that you identified in Step 3 can meet the capacity requirements of a corresponding physical server. At a minimum, complete the following tasks:

    • Task 1: Assess the memory requirement in the context of available virtualization host capacity.

    • Task 2: Assess the processor requirement. Hyper-V has a hard limit of four virtual processors per virtual machine. If a physical farm server requires eight processors, determine whether this requirement can be met by scaling out the number of virtual machines in a farm.

    • Task 3: Assess the virtual machine storage requirement in the context of local physical storage or SAN.

  5. Determine virtualization host requirements

    Determine the minimum host requirements (memory, number of cores, number and size of local hard drives, number of network adapters)Also consider and plan for the following:

    • Scalability: Determine if you can add more CPUs, more memory, more hard disks, and more network adapters to the host computer.

      Important Important:

      Depending on the manufacturer and computer model, you may not be able to increase capacity. You need to have this information before you use or purchase a server.

    • Extra host capacity: Determine whether or not the host has the capacity to scale up existing virtual machines, or to add additional virtual machines. This is very important if you plan to use Hyper-V failover clustering, quick migration, or live migration.

    Important Important:

    Plan for peak load and determine how short term spikes in load will be handled.

  6. Design virtualization architecture

    A well-designed architecture is required for a successful solution. For SharePoint Server 2010, a basic three-tier topology provides the foundation for all the solutions. The following elements form a good design that is based on the recommended foundation topology:

    • Good overall performance

    • Ease of maintenance and upgrade

    • Flexibility

    • Scalability

    • High availability

    For more information, see Plan for server farms and environments (SharePoint Server 2010).

    A virtualization architecture model consists of the virtualization hosts and the virtual machines that make up the farm topology. This model enables you to visualize the virtual environment that you plan to deploy. For more information about virtualization architectures, see Plan virtual architectures (SharePoint Server 2010) and Create a detailed design and system specifications for a virtual farm (SharePoint Server 2010).

    note Note:

    Be prepared to refine the architecture as you move through the planning process. The following steps may dictate changes to the architecture.

  7. Identify storage requirements

    Determine how much local physical storage or SAN storage is required for Hyper-V-related storage such as configuration files, Virtual Hard Disks (VHDs), and snapshots.

  8. Identify backup and recovery requirements

    In addition to the farm servers, you have to plan backup and recovery for all or part of a farm. For more information, see Backup and recovery for SharePoint Server 2010.

  9. Determine high availability requirements and design a solution

    Identify approaches for achieving high availability for Web servers, application servers, and databases. Typical strategies include the following:

  10. Identify health and capacity indicators for monitoring the virtual environment. For more information, see Create a detailed design and system specifications for a virtual farm (SharePoint Server 2010).

    Combine the key indicators that you derived in the previous steps with the planning you did for SharePoint Server 2010. For more information, see Plan for server farms and environments (SharePoint Server 2010). You have to determine all the health and capacity indicators in order to collect measurements from the following objects in the virtual environment:

    • Virtual machines with SharePoint Server 2010 installed

    • Virtual machines that are not part of the farm, such as a firewall server

    • Virtualization hosts

    • Network components

    After you start to collect data from the virtual environment, you can create a baseline, which can be used to assess and tune the virtual environment during deployment and after the farm goes into production.

  11. Create a deployment plan for the deployment phase of the system lifecycle.

    For more information, see the SharePoint 2010 Products Deployment model, available in the Technical diagrams (SharePoint Server 2010) article.

  12. Create a maintenance plan

    Create a maintenance plan that enables you to implement password changes and apply software updates, service packs, and hotfixes. This plan should include the virtual machines and the virtualization hosts.

Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft. All rights reserved.