Export (0) Print
Expand All

Configure a Remote Access Network Policy

Published: April 30, 2010

Updated: April 30, 2010

Applies To: Windows Server 2008, Windows Server 2008 R2

In Windows Server 2008 R2 and Windows Server 2008, you can control remote client access to resources on a private network by using the following methods:

  1. In either Local Users and Groups on a stand-alone computer, or in Active Directory Users and Computers on a member of a domain, right-click the user account and then click Properties.

  2. Select the Dial-in tab.

  3. In the Network Access Permission section, select Allow access.

  4. If you have the appropriate hardware support and want to restrict the user to calling from only an approved phone number, select Verify Caller-ID and enter the phone number.

  5. If you want the remote access server to call the user back to complete the connection, configure the appropriate Callback Option.

  6. If you want the computer to use a specific IP address instead of having the RRAS server allocate the address to the computer, select Assign Static IP Addresses, and then click Static IP Addresses to configure the address that you want to use.

  7. If you need to configure the connection with specific static routes to enable access to certain network resources, then select Apply Static Routes, and then click Static Routes to configure the routes that you want to use.

  1. On the computer running NPS, in Server Manager, expand Network Policy and Access Services, expand NPS, expand Policies, and then click Network Policies.

  2. In the Actions pane, click New.

    The New Network Policy wizard appears.

  3. Type a name for the policy, for example, Grant Access to Members of CorpRemoteAccessUsers Group.

  4. For Type of network access server, select Remote Access Server (VPN-Dial up), and then click Next.

  5. On the Specify Conditions page, click Add.

  6. On the Select condition dialog box, select User Groups, and then click Add.

  7. On the User Groups dialog box, click Add Groups, type or browse to the group you want to add, and then click OK.

    The domain/group name appears in the User Groups dialog box.

  8. Click OK. The User Groups condition with the domain/group name appears on the Specify Conditions wizard page.

  9. Click Next.

  10. On the Specify Access Permission wizard page, select Access granted, and then click Next.

  11. On the Configure Authentication Methods wizard page, specify the authentication methods to be used when this policy is used to configure a connection to the RRAS server. When you have selected and configured the methods, click Next.

    securitySecurity Note
    We recommend that you use only one of the EAP authentication methods or MS-CHAP-v2.

  12. On the Configure Constraints wizard page, specify parameters that you want to enforce on the connection. For Idle Timeout and Session Timeout, the connection is dropped if either timeout value is reached. For the other constraints, the connection request must match the configured parameter, or the connection attempt is rejected. Click Next.

  13. On the Configure Settings wizard page you can configure Remote Authentication Dial-In User Service (RADIUS) attributes that are sent to the client to configure its use of the connection. If your network uses Network Access Protection (NAP) to help enforce network client health, then you can configure the connection to allow only limited access to a remediation server group until the client is verified as compliant with the NAP policy. You can also configure whether the client can use multiple connections to increase available bandwidth and how that bandwidth is managed. Finally, you can configure IP filters to restrict network traffic that can be sent or received, the encryption that is used for the connection, and how the client receives its IP address configuration for the connection.

  14. On the Completing New Network Policy wizard page, confirm your settings. Click Previous to return to any page to adjust any settings. Click Finish on this page when you are done.

    The policy is saved, and appears in the Network Policies list. The policy is assigned a Processing Order. Policies are evaluated in the order shown in this column. The first policy to match the conditions of the connection request is the one used to authorize and configure the connection. When troubleshooting connection failures, ensure that the policy order is not causing an unexpected policy to be used.

Was this page helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft