Export (0) Print
Expand All
This topic has not yet been rated - Rate this topic

Create Network Interregion Routes

 

Topic Last Modified: 2011-02-25

A network interregion route defines the route between a pair of network regions. Each pair of network regions in your call admission control deployment requires a network interregion route. This enables every network region within the deployment to access every other region.

While region links set bandwidth limitations on the connections between regions, an interregion route determines which linked path the connection will traverse from one region to another.

For details about working with network interregion routes, see the Lync Server Management Shell documentation for the following cmdlets:

  • New-CsNetworkInterRegionRoute
  • Get-CsNetworkInterRegionRoute
  • Set-CsNetworkInterRegionRoute
  • Remove-CsNetworkInterRegionRoute

In the example topology, network interregion routes must be defined for each of the three region pairs: North America/EMEA, EMEA/APAC, and North America/APAC.

  1. Start the Lync Server Management Shell: Click Start, click All Programs, click Microsoft Lync Server 2010, and then click Lync Server Management Shell.

  2. Run the New-CsNetworkInterRegionRoute cmdlet to define the required routes. For example, run:

    New-CsNetworkInterRegionRoute -Identity NorthAmerica_EMEA_Route -NetworkRegionID1 NorthAmerica -NetworkRegionID2 EMEA -NetworkRegionLinkIDs "NA-EMEA-LINK"
    
    New-CsNetworkInterRegionRoute -Identity NorthAmerica_APAC_Route -NetworkRegionID1 NorthAmerica -NetworkRegionID2 APAC -NetworkRegionLinkIDs "NA-EMEA-LINK, EMEA-APAC-LINK"
    
    New-CsNetworkInterRegionRoute -Identity EMEA_APAC_Route -NetworkRegionID1 EMEA -NetworkRegionID2 APAC -NetworkRegionLinkIDs "EMEA-APAC-LINK"
    
    noteNote:
    The North America/APAC network interregion route requires two network region links because there is no direct network region link between them.
  1. Open a browser window, and then enter the Admin URL to open the Lync Server Control Panel. For details about the different methods you can use to start Lync Server Control Panel, see Open Lync Server Administrative Tools.

  2. In the left navigation bar, click Network Configuration.

  3. Click the Region Route navigation button.

  4. Click New.

  5. On the New Region Route page, click Name and then type a name for the network interregion route.

  6. Click Network Region #1, and then click a network region in the list that you want to route to Network Region #2.

  7. Click Network Region #2, and then click a network region in the list that you want to route to Network Region #1.

  8. Click Add beside the Network Region Links field and then a network region link that will be used in the network interregion route.

    noteNote:
    If you are creating a route for two network regions that do not have a direct network region link between them, you must add all the necessary links to complete the route. For example, the North America/APAC network interregion route requires two network region links because there is no direct network region link between them.
  9. Click Commit.

  10. To finish creating network interregion routes for your topology, repeat steps 4 through 9 with settings for other network interregion routes.

 
Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft. All rights reserved.