Export (0) Print
Expand All

Lync Server 2010 Pilot Pool Architecture

Lync Server 2010
 

Topic Last Modified: 2011-04-04

The following figure shows the pilot pool reference topology used in this document. Lync Server 2010 is installed side by side with an existing Office Communications Server 2007 R2 installation. After merging the topologies, a few test users will be homed on Lync Server 2010 and then communicate with users who are homed on Office Communications Server 2007 R2 servers. This will show interoperability between users who are homed in different pools can continue to communicate and use the existing workloads and perimeter network infrastructure.

Pilot Pool Reference Topology

Initially a Lync Server 2010 pool is deployed in parallel with Office Communications Server 2007 R2. External traffic and federation is done through the legacy Edge Server environment. In Phase 7: Add Lync Server 2010 Edge Server and Director to Pilot Pool, the Director and Edge Server are added to the deployment.

The following table lists the fully qualified domain names (FQDNs) for the various server roles used in this topology. It is supplied solely for reference purposes.

 

Server Role Office Communications Server 2007 R2 FQDN Lync Server 2010 FQDN

Standard Edition Server

SE-R2.CONTOSO.NET

LYNC-SE.CONTOSO.NET

Edge Server

EDGE-R2.CONTOSO.NET

LYNC-EDGE.CONTOSO.NET

Director

DIR-R2.CONTOSO.NET

LYNC-DIR.CONTOSO.NET

Mediation Server

MEDSVR01.CONTOSO.NET

Collocated on LYNC-SE.CONTOSO.NET

importantImportant:
We recommend deploying Lync Server 2010 Enterprise Edition for deployments that require a true high-availability solution.
importantImportant:
We recommend collocating the Lync Server Mediation Server with a Lync Server Front End pool or Standard Edition server when merging an Office Communications Server 2007 R2 stand-alone Mediation Server.
 
Was this page helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft