Export (0) Print
Expand All

Deployment Process for E9-1-1

 

Topic Last Modified: 2012-06-11

To plan effectively for Enhanced 9-1-1, be sure to include the following deployment requirements:

  • Prerequisites for deploying E9-1-1.
  • Steps that are required to deploy E9-1-1.

Before you deploy E9-1-1, you must have already deployed your Microsoft Lync Server 2010 internal servers, including a Central Management store, a Front End pool or a Standard Edition server, one or more Mediation Servers or Mediation Server pools, and Lync Server 2010 clients. In addition, an E9-1-1 deployment requires a SIP trunk to a qualified E9-1-1 service provider or an Emergency Location Identification Number (ELIN) gateway to your public switched telephone network (PSTN). Lync Server supports using E9-1-1 service providers only inside the United States.

The following table provides an overview of the E9-1-1 deployment process. For details about deployment steps, see Configure Enhanced 9-1-1 in the Deployment documentation.

 

Phase Steps Roles Deployment documentation

Configure voice usages, routes, and trunk configurations

  1. Create a new PSTN usage record. This is the same name that is used for the PSTN Usage setting in the Location Policy.
  2. Create or assign a voice route to the PSTN usage record created in the previous step, and then point the gateway attribute to the E9-1-1 SIP trunk or ELIN gateway.
  3. For a SIP trunk E9-1-1 service provider, set the trunk that will be handling E9-1-1 calls over the SIP to pass PIDF-LO data by using the Set-CsTrunkConfiguration –EnablePIDFLOSupport cmdlet.
  4. Optionally, for a SIP trunk E9-1-1 service provider, create or assign a local PSTN route for calls that are not handled by the E9-1-1 service provider’s SIP trunk. If supported by your E9-1-1 service provider, assign a trunk configuration rule to the gateway that translates the 911 dial string into the direct inward dialing (DID) number of the national Emergency Call Response Center (ECRC).

CSVoiceAdmin

Configure an E9-1-1 Voice Route

Create location policies and assign them to users and subnets

  1. Review the global location policy.
  2. Create a location policy with a user-level scope; or, if the organization has more than one site with different emergency usages, create a location policy with a network-level scope.
  3. Assign the location policy to network sites.
  4. Add the appropriate subnets to the network site.
  5. (Optional) Assign the location policy to user policies.

CSVoiceAdmin

CSLocationAdmin (except for creating Location Policies)

Create Location Policies

Add a Location Policy to a Network Site

Associate Subnets with Network Sites for E9-1-1

Configure the location database

  1. Populate the database with a mapping of network elements to locations.
  2. For ELIN gateways, add the ELINs to the <CompanyName> column.
  3. Configure the connection to the E9-1-1 service provider.
  4. Validate the addresses with the E9-1-1 service provider.
  5. Publish the updated database.
  6. For ELIN gateways, upload the ELINs to your PSTN carrier's Automatic Location Identification (ALI) database.

CSVoiceAdmin

CSLocationAdmin

Configure the Location Database

Configure advanced features (optional)

  1. Configure the URL for the SNMP application.
  2. Configure the URL for the location of the Secondary Location Information service.

CSVoiceAdmin

Configure an SNMP Application

Configure a Secondary Location Information Service

 
Was this page helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft