Export (0) Print
Expand All

STEP 10: Install and Configure 2-EDGE1

Published: February 29, 2012

Updated: August 15, 2012

Applies To: Windows 8, Windows Server 2012, Windows Server 2012 R2



2-EDGE1 configuration consists of the following:

2-EDGE1 must have two network adapters installed.

  1. Start the installation of Windows Server 2012.

  2. Follow the instructions to complete the installation, specifying Windows Server 2012 (full installation) and a strong password for the local Administrator account. Log on using the local Administrator account.

  3. Connect 2-EDGE1 to a network that has Internet access and run Windows Update to install the latest updates for Windows Server 2012, and then disconnect from the Internet.

  4. Connect one network adapter to the 2-Corpnet subnet and the other to the simulated Internet.

  1. In the Server Manager console, click Local Server, and then in the Properties area, next to Wired Ethernet Connection, click the link.

  2. In Network Connections, right-click the network connection that is connected to the 2-Corpnet subnet, click Rename, type 2-Corpnet, and then press ENTER.

  3. Right-click 2-Corpnet, and then click Properties.

  4. Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.

  5. Click Use the following IP address. In IP address, type 10.2.0.20, in Subnet mask, type 255.255.255.0.

  6. Click Use the following DNS server addresses. In Preferred DNS server, type 10.2.0.1, and in Alternate DNS server, type 10.0.0.1.

  7. Click Advanced, and then click the DNS tab.

  8. In DNS suffix for this connection, type corp2.corp.contoso.com, and then click OK twice.

  9. Click Internet Protocol Version 6 (TCP/IPv6), and then click Properties.

  10. Click Use the following IPv6 address. In IPv6 address, type 2001:db8:2::20, in Subnet prefix length, type 64. Click Use the following DNS server addresses, and in Preferred DNS server, type 2001:db8:2::1, in Alternate DNS server, type 2001:db8:1::1.

  11. Click Advanced, and then click the DNS tab.

  12. In DNS suffix for this connection, type corp2.corp.contoso.com, and then click OK twice.

  13. On the 2-Corpnet Properties dialog box, click Close.

  14. In the Network Connections window, right-click the network connection that is connected to the Internet subnet, click Rename, type Internet, and then press ENTER.

  15. Right-click Internet, and then click Properties.

  16. Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.

  17. Click Use the following IP address. In IP address, type 131.107.0.20. In Subnet mask, type 255.255.255.0.

  18. Click Advanced. On the IP Settings tab, in the IP addresses area, click Add. On the TCP/IP Address dialog box, in IP address type 131.107.0.21, in Subnet mask type 255.255.255.0, and then click Add.

  19. Click the DNS tab.

  20. In DNS suffix for this connection, type isp.example.com, click OK twice, and then click Close.

  21. Close the Network Connections window.

  1. On the Start screen, type cmd.exe, and then press ENTER.

  2. In the Command Prompt window, enter the following commands. After entering each command, press ENTER.

    netsh interface IPv4 add route 10.0.0.0/24 2-Corpnet 10.2.0.254
    netsh interface IPv6 add route 2001:db8:1::/64 2-Corpnet 2001:db8:2::fe
    
    
  3. To check network communication between 2-EDGE1 and DC1, type ping dc1.corp.contoso.com.

  4. Verify that there are four responses from either the IPv4 address, 10.0.0.1, or from the IPv6 address, 2001:db8:1::1.

  5. Close the Command Prompt window.

  1. In the Server Manager console, in Local Server, in the Properties area, next to Computer name, click the link.

  2. On the System Properties dialog box, on the Computer Name tab, click Change.

  3. On the Computer Name/Domain Changes dialog box, in Computer name, type 2-EDGE1. In Member of, click Domain, type corp2.corp.contoso.com, and then click OK.

  4. If you are prompted for a user name and password, type Administrator and its password, and then click OK.

  5. When you see a dialog box welcoming you to the corp2.corp.contoso.com domain, click OK.

  6. When you are prompted that you must restart the computer, click OK.

  7. On the System Properties dialog box, click Close.

  8. When you are prompted to restart the computer, click Restart Now.

  9. After the computer has restarted, click Switch User, and then click Other User and log on to the CORP2 domain with the Administrator account.

  1. On the Start screen, type mmc.exe, and then press ENTER.

  2. In the MMC console, on the File menu, click Add/Remove Snap-in.

  3. On the Add or Remove Snap-ins dialog box, click Certificates, click Add, click Computer account, click Next, click Local computer, click Finish, and then click OK.

  4. In the console tree of the Certificates snap-in, open Certificates (Local Computer)\Personal.

  5. Right-click Personal, point to All Tasks, and then click Request New Certificate.

  6. Click Next twice.

  7. On the Request Certificates page, select the Client-Server Authentication and the Web Server check boxes, and then click More information is required to enroll for this certificate.

  8. On the Certificate Properties dialog box, on the Subject tab, in the Subject name area, in Type, select Common name.

  9. In Value, type 2-edge1.contoso.com, and then click Add.

  10. In the Alternative name area, in Type, select DNS.

  11. In Value, enter 2-edge1.contoso.com, and then click Add.

  12. On the General tab, in Friendly name, type IP-HTTPS Certificate.

  13. Click OK, click Enroll, and then click Finish.

  14. In the details pane of the Certificates snap-in, verify that a new certificate with the name 2-edge1.contoso.com was enrolled with Intended Purposes of Server Authentication, and a new certificate with the name 2-edge1.corp2.corp.contoso.com was enrolled with Intended Purposes of Client Authentication and Server Authentication.

  15. Close the console window. If you are prompted to save settings, click No.

  1. On the Start screen, type compmgmt.msc, and then press ENTER.

  2. In the left pane, click Local Users and Groups.

  3. Double-click Groups, and then double-click Administrators.

  4. On the Administrators Properties dialog box, click Add, and on the Select Users, Computers, Service Accounts, or Groups dialog box, click Locations.

  5. On the Locations dialog box, in the Location tree, click corp.contoso.com, and then click OK.

  6. In the Enter the object names to select type User1, and then click OK.

  7. On the Administrators Properties dialog box, click OK.

  8. Close the Computer Management window.

  1. In the Server Manager console, in the Dashboard, click Add roles and features.

  2. Click Next three times to get to the server role selection screen.

  3. On the Select server roles dialog, select Remote Access, click Add Features, and then click Next.

  4. Click Next five times.

  5. On the Confirm installation selections dialog, click Install.

  6. On the Installation progress dialog, verify that the installation was successful, and then click Close.

Was this page helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft