Export (0) Print
Expand All

STEP 7: Test Connectivity When Returning to the Corpnet

Published: February 29, 2012

Updated: August 15, 2012

Applies To: Windows 8, Windows Server 2012, Windows Server 2012 R2



Many of your users will move between remote locations and the corpnet, so it’s important that when they return to the corpnet that they are able to access resources without having to make any configuration changes. Remote Access makes this possible because when the DirectAccess client returns to the corpnet, it is able to make a connection to the network location server. Once the HTTPS connection is successfully established to the network location server, the DirectAccess client disables the DirectAccess client configuration and uses a direct connection to corpnet.

  1. Shut down CLIENT1 and then unplug CLIENT1 from the Homenet subnet or virtual switch and connect it to the Corpnet subnet or virtual switch. Turn on CLIENT1, and log on as CORP\User1.

  2. Open an elevated Windows PowerShell window, type ipconfig /all, and press ENTER. The output will indicate that CLIENT1 has a local IP address, and that there is no active 6to4, Teredo, or IP-HTTPS tunnel.

  3. Test connectivity to the network share on APP2. On the Start screen, type \\APP2\Files, and then press ENTER. You will be able to open the file in that folder.

Was this page helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft