Set-VMNetworkAdapterFailoverConfiguration

Configures the IP address of a virtual network adapter to be used when a virtual machine fails over.

Syntax

Set-VMNetworkAdapterFailoverConfiguration
   [-VMName] <String>
   [-VMNetworkAdapterName <String>]
   [-ComputerName <String[]>]
   [-IPv4Address <String>]
   [-IPv6Address <String>]
   [-IPv4SubnetMask <String>]
   [-IPv6SubnetPrefixLength <Int32>]
   [-IPv4PreferredDNSServer <String>]
   [-IPv4AlternateDNSServer <String>]
   [-IPv6PreferredDNSServer <String>]
   [-IPv6AlternateDNSServer <String>]
   [-IPv4DefaultGateway <String>]
   [-IPv6DefaultGateway <String>]
   [-ClearFailoverIPv4Settings]
   [-ClearFailoverIPv6Settings]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-VMNetworkAdapterFailoverConfiguration
   [-VMNetworkAdapter] <VMNetworkAdapterBase>
   [-IPv4Address <String>]
   [-IPv6Address <String>]
   [-IPv4SubnetMask <String>]
   [-IPv6SubnetPrefixLength <Int32>]
   [-IPv4PreferredDNSServer <String>]
   [-IPv4AlternateDNSServer <String>]
   [-IPv6PreferredDNSServer <String>]
   [-IPv6AlternateDNSServer <String>]
   [-IPv4DefaultGateway <String>]
   [-IPv6DefaultGateway <String>]
   [-ClearFailoverIPv4Settings]
   [-ClearFailoverIPv6Settings]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-VMNetworkAdapterFailoverConfiguration
   [-VM] <VirtualMachine>
   [-VMNetworkAdapterName <String>]
   [-IPv4Address <String>]
   [-IPv6Address <String>]
   [-IPv4SubnetMask <String>]
   [-IPv6SubnetPrefixLength <Int32>]
   [-IPv4PreferredDNSServer <String>]
   [-IPv4AlternateDNSServer <String>]
   [-IPv6PreferredDNSServer <String>]
   [-IPv6AlternateDNSServer <String>]
   [-IPv4DefaultGateway <String>]
   [-IPv6DefaultGateway <String>]
   [-ClearFailoverIPv4Settings]
   [-ClearFailoverIPv6Settings]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-VMNetworkAdapterFailoverConfiguration cmdlet sets the configuration of an IP address of a virtual network adapter to be used when a virtual machine fails over.

Examples

Example 1

PS C:\> Get-VMNetworkAdapter VM01 NetworkAdapter01 | Set-VMNetworkAdapterFailoverConfiguration -IPv4Address 10.100.1.100 -IPv4SubnetMask 255.255.255.0

This example configures a failover IPv4 address for virtual network adapter NetworkAdapter01 on virtual machine VM01.

Example 2

PS C:\> Get-VMNetworkAdapter VM01 NetworkAdapter01 | Set-VMNetworkAdapterFailoverConfiguration -ClearFailoverIPv4Settings

This example clears the current failover IPv4 settings on virtual network adapter NetworkAdapter01 for virtual machine VM01.

Example 3

PS C:\> Get-VMNetworkAdapter VM01 NetworkAdapter01 | Set-VMNetworkAdapterFailoverConfiguration -Ipv6Address aaaa:aaaa:aaaa:aaaa:aaaa:aaaa:aaa:aaaa -Ipv6SubnetPrefixLength 12

This example configures an IPv6 address and a prefix length of 12 for a virtual network adapter NetworkAdapter01 for virtual machine VM01.

Example 4

PS C:\> Get-VMNetworkAdapter VM01 NetworkAdapter01 | Set-VMNetworkAdapterFailoverConfiguration -ClearFailoverIPv6Settings

This example clears the current failover IPv6 settings on a virtual network adapter NetworkAdapter01 for virtual machine VM01.

Parameters

-ClearFailoverIPv4Settings

Clears the configured IPv4 failover settings. The IPv4 address configured in the primary virtual machine (static or dynamic) will be used by the Replica virtual machine.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ClearFailoverIPv6Settings

Clears the configured IPv6 failover settings. The IPv6 address configured in the primary virtual machine (static or dynamic) will be used by the Replica virtual machine.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ComputerName

Specifies one or more Hyper-V hosts on which the IP address configuration of a virtual network adapter is to be set. NetBIOS names, IP addresses, and fully-qualified domain names are allowable. The default is the local computer - use "localhost" or a dot (".") to specify the local computer explicitly.

Type:String[]
Position:Named
Default value:.
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IPv4Address

Specifies the IPv4 address to set on the VMNetworkAdapter for use on failover of the virtual machine. You must also specify the IPv4SubnetMask parameter when you specify this parameter.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IPv4AlternateDNSServer

Specifies the IPv4 alternate DNS server to be set on the VMNetworkAdapter for use on failover of the virtual machine.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IPv4DefaultGateway

Specifies the IPv4 default gateway to be set on VMNetworkAdapter for use on failover of the virtual machine..

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IPv4PreferredDNSServer

Specifies the IPv4 preferred DNS server to be set on VMNetworkAdapter for use on failover of the virtual machine.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IPv4SubnetMask

Specifies the IPv4 subnet mask to be set on VMNetworkAdapter for use on failover of the virtual machine. You must specify the IPv4Address parameter when you specify this parameter.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IPv6Address

Specifies the IPv6 address to be set on VMNetworkAdapter for use on failover of the virtual machine. You must specify the IPv6SubnetPrefixLength parameter when you specify this parameter.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IPv6AlternateDNSServer

Specifies the IPv6 alternate DNS server to be set on VMNetworkAdapter for use on failover of the virtual machine.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IPv6DefaultGateway

Specifies the IPv6 default gateway to be set on VMNetworkAdapter for use on failover of the virtual machine.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IPv6PreferredDNSServer

Specifies the IPv6 preferred DNS server to be set on VMNetworkAdapter for use on failover of the virtual machine.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IPv6SubnetPrefixLength

Specifies the IPv6 subnet prefix length to be set on VMNetworkAdapter for use on failover of the virtual machine. You must specify the IPv6Address parameter when you specify this parameter.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PassThru

Specifies that a Microsoft.HyperV.PowerShell.VMNetworkAdapterFailoverConfiguration object is to be passed through to the pipeline representing the IP address configuration to be set.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-VM

Specifies the virtual machine for which you want to configure the IP address.

Type:VirtualMachine
Position:0
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-VMName

Specifies the friendly name of the virtual machine for which you want to configure the IP address.

Type:String
Position:0
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-VMNetworkAdapter

Specifies the virtual network adapter for which you want to configure the IP address.

Type:VMNetworkAdapterBase
Position:0
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-VMNetworkAdapterName

Specifies the name of the virtual network adapter for which you want to set the IP address.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Outputs

None by default; Microsoft.HyperV.PowerShell.VMNetworkAdapterFailoverConfiguration if -PassThru is specified.