Export (0) Print
Expand All

Set-NetQosDcbxSetting

Windows Server 2012 R2 and Windows 8.1

Updated: October 17, 2013

Applies To: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2

Set-NetQosDcbxSetting

Sets the data center bridging exchange (DCBX) settings.

Syntax

Parameter Set: InputObject (cdxml)
Set-NetQosDcbxSetting -Willing <Boolean> [-AsJob] [-CimSession <CimSession[]> ] [-InputObject <CimInstance[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]




Detailed Description

The Set-NetQosDcbxSetting cmdlet sets the data center bridging exchange (DCBX) settings. The only setting that Windows Server® 2012 and later allows a user to set is that the network adapters in computers running Windows Server 2012 and later should accept data center bridging (DCB) configurations from Windows Server 2012 and later or from a remote device via the DCBX protocol, which is specified in the IEEE data center bridging (DCB) standard.

If the Willing parameter is set to True, then Windows Server 2012 or later will not send priority-based flow control (PFC) and traffic class settings to DCB-capable network adapters in the computer. If the Willing parameter is set to False, then Windows Server 2012 or later will send the settings to the network adapters.

Parameters

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell® background jobs, see about_Jobs.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-CimSession<CimSession[]>

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.


Aliases

Session

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-InputObject<CimInstance[]>

Specified the object which will be modified by this cmdlet. The object must be piped to the cmdlet.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

True (ByValue)

Accept Wildcard Characters?

false

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-ThrottleLimit<Int32>

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-Willing<Boolean>

Specifies that a DCB-capable network adapter should accept the configuration from a remote peer via the DCBX protocol.


Aliases

none

Required?

true

Position?

named

Default Value

none

Accept Pipeline Input?

True (ByPropertyName)

Accept Wildcard Characters?

false

-Confirm

Prompts you for confirmation before running the cmdlet.


Required?

false

Position?

named

Default Value

false

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.


Required?

false

Position?

named

Default Value

false

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

<CommonParameters>

This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see    about_CommonParameters.

Inputs

The input type is the type of the objects that you can pipe to the cmdlet.

  • None

Outputs

The output type is the type of the objects that the cmdlet emits.

  • Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetQosDcbxSettingData

    The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
    The MSFT_NetQosDcbxSettingData object contains the DCBX setting configured in Windows Server 2012 and later. Only when the PassThru parameter is specified will the command return the MSFT_NetQosDcbxSettingData object.


  • Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetQosDcbxSettingData

    The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.


Examples

EXAMPLE 1

This example enables the DCBX willing state, so that a DCB-capable network adapter is willing to accept configurations from a remote peer.


PS C:\> Set-NetQosDcbxSetting -Willing $true

Related topics

Was this page helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft