Set-DhcpServerv4OptionValue
Sets an IPv4 option value at the server, scope, or reservation level.
Syntax
Set-DhcpServerv4OptionValue
[-PolicyName <String>]
[-PassThru]
[-Force]
[-ReservedIP <IPAddress>]
[[-ScopeId] <IPAddress>]
[-UserClass <String>]
[-ComputerName <String>]
[-VendorClass <String>]
[-Value] <String[]>
[-OptionId] <UInt32>
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-DhcpServerv4OptionValue
[-PolicyName <String>]
[-PassThru]
[-Force]
[-DnsDomain <String>]
[-DnsServer <IPAddress[]>]
[-ReservedIP <IPAddress>]
[-Router <IPAddress[]>]
[[-ScopeId] <IPAddress>]
[-UserClass <String>]
[-WinsServer <IPAddress[]>]
[-Wpad <String>]
[-ComputerName <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-DhcpServerv4OptionValue cmdlet sets an IPv4 option value at the server, scope, or reservation level. The definition for the option must already exist. This cmdlet will fail if the option definition does not exist in the Dynamic Host Configuration Protocol (DHCP) server service. If only the ReservedIP parameter is specified, then the option values are set at the reservation level. If only the ScopeId parameter is specified, then the option values are set at the scope level. If neither the ScopeId nor ReservedIP parameter is specified, then the option values are set at the server level. If the VendorClass parameter is specified, then the option value is set for that vendor class. If the UserClass parameter is specified, then the option value is set for that user class. If the PolicyName parameter is specified, then the option values are set for that policy. The UserClass and PolicyName parameters cannot both be specified. The ScopeId and ReservedIP parameters cannot both be specified.
The PolicyName and ReservedIP parameters cannot both be specified.
Note: The option values for policies can only be set for a DHCP server service running on Windows Server® 2012. Setting user class options for a DHCP server service running on Windows Server 2012 creates of a policy with the policy name set to the name of the user class. For a DHCP server service running on firstref_server_7 or earlier, only option values based upon the user class can be set.
To set options based upon legacy user classes, then the UserClass parameter must be specified.
Examples
EXAMPLE 1
PS C:\>Set-DhcpServerv4OptionValue -ComputerName dhcpserver.contoso.com -DnsServer 192.168.1.2 -WinsServer 192.168.1.3 -DnsDomain contoso.com -Router 192.168.1.1 -Wpad http://proxy.contoso.com/wpad.datThis example sets the server level option values for DNS server, WINS server, DNS domain, router, and WPAD.
EXAMPLE 2
PS C:\>Set-DhcpServerv4OptionValue -ComputerName dhcpserver.contoso.com -ScopeId 10.10.10.0 -DnsServer 192.168.1.2 -WinsServer 192.168.1.3 -DnsDomain contoso.com -Router 192.168.1.1 -Wpad http://proxy.contoso.com/wpad.datThis example sets the option values for DNS server, WINS server, DNS domain, router, and WPAD for scope 10.10.10.0.
EXAMPLE 3
PS C:\>Set-DhcpServerv4OptionValue -ComputerName dhcpserver.contoso.com -ReservedIP 10.10.10.5 -DnsServer 192.168.1.2 -WinsServer 192.168.1.3 -DnsDomain contoso.com -Router 192.168.1.1 -Wpad http://proxy.contoso.com/wpad.datThis example sets the option values for DNS server, WINS server, DNS domain, router, and WPAD for reserved IP address 10.10.10.5.
EXAMPLE 4
PS C:\>Set-DhcpServerv4OptionValue -ComputerName dhcpserver.contoso.com -ScopeId 10.10.10.0 -PolicyName LabComputers -DnsServer 192.168.1.2 -WinsServer 192.168.1.3 -DnsDomain contoso.com -Router 192.168.1.1 -Wpad http://proxy.contoso.com/wpad.datThis example sets the option values for DNS server, WINS server, DNS domain, router, and WPAD for policy named LabComputers in the scope 10.10.10.0.
EXAMPLE 5
PS C:\>Set-DhcpServerv4OptionValue -ComputerName dhcpserver.contoso.com -OptionId 6 -Value 192.168.1.1This example sets the server-wide DHCPv4 option value for option ID 6, or DNS server.
EXAMPLE 6
PS C:\>Set-DhcpServerv4OptionValue -ComputerName dhcpserver.contoso.com -ScopeId 10.10.10.0 -OptionId 6 -Value 192.168.1.1This example sets the DHCPv4 option value for option ID 6, or DNS server, for the scope 10.10.10.0.
EXAMPLE 7
PS C:\>Set-DhcpServerv4OptionValue -ComputerName dhcpserver.contoso.com -ReservedIP 10.10.10.5 -OptionId 6 -Value 192.168.1.1This example sets the DHCPv4 option value for option ID 6, or DNS server, for the specified reservation.
EXAMPLE 8
PS C:\>Set-DhcpServerv4OptionValue -ComputerName dhcpserver.contoso.com -ScopeId 10.10.10.0 -VendorClass MSUCClient -OptionId 5 -Value 6874747073This example sets the vendor-class-specific DHCPv4 option value for option ID 5 on the specified scope for the specified vendor class named MSUCClient.
EXAMPLE 9
PS C:\>Set-DhcpServerv4OptionValue -ComputerName dhcpserver.contoso.com -ScopeId 10.10.10.0 -PolicyName PrinterPolicy -OptionId 6 -Value 192.168.1.10This example sets the DHCPv4 option value for option ID 6, or DNS server, on the specified scope for the specified policy.
EXAMPLE 10
PS C:\>Set-DhcpServerv4OptionValue -ComputerName dhcpserver.contoso.com -ScopeId 10.10.10.0 -UserClass LabComputer -OptionId 6 -Value 192.168.1.10This example sets the user-class-specific DHCPv4 option value for option ID 6, or DNS server, on the specified scope for the specified user class.
EXAMPLE 11
PS C:\> Set-DhcpServerv4OptionValue -ScopeId 10.10.10.0 -OptionId 43 -Value "241","08","33","255","132","10","33","255","133"This example sets the vendor-class-specific DHCPv4 option value for option ID 43, or embedded vendor-specific options, on the specified scope.
Parameters
-AsJob
ps_cimcommon_asjob
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComputerName
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the DHCP server service.
| Type: | String |
| Aliases: | Cn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DnsDomain
Specifies the value for the DNS domain option.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DnsServer
Specifies one or more values for the DNS server option, in the IPv4 address format.
| Type: | IPAddress[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Force
Specifies that the DNS server validation will be skipped. This parameter is only applicable if the DnsServer parameter is specified.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OptionId
Specifies the numeric identifier (ID) of the option for which one or more values are set.
| Type: | UInt32 |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PolicyName
Specifies the name of the policy for which one or more option values are set.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ReservedIP
Specifies the IPv4 address of the reservation for which one or more option values are set.
| Type: | IPAddress |
| Aliases: | IPAddress |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Router
Specifies one or more values for the router or default gateway option, in IPv4 address format.
| Type: | IPAddress[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ScopeId
Specifies the scope ID, in IPv4 address format for which one or more option values are set.
| Type: | IPAddress |
| Position: | 3 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserClass
Sets the option value for the specified user class.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Value
Specifies one or more values to be set for the option. The format that the values need to be specified is specified per the data type of the options as follows:
-- Byte, Word, DWord, DWordDword: The values need to be specified as decimal or hexadecimal strings
-- IPAddress, IPv6Address: The values will need to be specified as strings
-- String: The values will need to be specified as strings
-- BinaryData, EncapsulatedData: The values will need to be specified as hexadecimal strings
| Type: | String[] |
| Position: | 2 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-VendorClass
Sets the option value for the specified vendor class.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WinsServer
Specifies the values for the WINS server option, in IPv4 address format.
| Type: | IPAddress[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Wpad
Specifies the value for the web proxy auto detection option. The value for this option is specified as a URL.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
Inputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Outputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Related Links
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for