Set-DhcpServerv6OptionValue
Sets an IPv6 option value at the server, scope, or reservation level.
Syntax
Set-DhcpServerv6OptionValue
[-PassThru]
[-Force]
[[-Prefix] <IPAddress>]
[-UserClass <String>]
[-ComputerName <String>]
[-ReservedIP <IPAddress>]
[-Value] <String[]>
[-OptionId] <UInt32>
[-VendorClass <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-DhcpServerv6OptionValue
[-PassThru]
[-Force]
[[-Prefix] <IPAddress>]
[-UserClass <String>]
[-DnsServer <IPAddress[]>]
[-DomainSearchList <String[]>]
[-InfoRefreshTime <UInt32>]
[-ComputerName <String>]
[-ReservedIP <IPAddress>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-DhcpServerv6OptionValue cmdlet sets an IPv6 option value at the server, scope, or reservation level. The definition for the option must already exist on the Dynamic Host Configuration Protocol (DHCP) server service. If the ReservedIP parameter is specified, then the option values are set at the reservation level. If only the Prefix parameter is specified, then the option values are set at the scope level. If neither the Prefix nor ReservedIP parameter is specified, then the option values are set at the server level. The Prefix and ReservedIP parameters cannot both be specified.
If the VendorClass parameter is specified, then this cmdlet sets the option value for the specified vendor class. If the UserClass parameter is specified, then this cmdlet sets the option value for the specified user class.
Examples
EXAMPLE 1
PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -DnsServer 2001:4898:7020:1020::2 -DomainSearchList contoso.comThis example sets the DHCPv6 server level option values for DNS server and domain search list options.
EXAMPLE 2
PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -DnsServer 2001:4898:7020:1020::2 -DomainSearchList contoso.comThis example sets the DHCPv6 option values for DNS server and domain search list options on the scope 2001:4898:7020:1020::.
EXAMPLE 3
PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -OptionId 23 -Value 2001:4898:7020:1020::2This example sets server-wide DHCPv6 option value for option ID 23, or the DNS server.
EXAMPLE 4
PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -OptionId 23 -Value 2001:4898:7020:1020::2This example sets the DHCPv6 option value for option ID 23, or the DNS server, for the specified DHCPv6 scope.
EXAMPLE 5
PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -ReservedIP 2001:4898:7020:1020::5 -OptionId 23 -Value 2001:4898:7020:1020::2This example sets the DHCPv6 option value for option ID 23, or the DNS server, for the specified reservation.
EXAMPLE 6
PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -VendorClass MSUCClient -OptionId 5 -Value 6874747073This example sets the vendor-class-specific DHCPv6 option value configured on the specified scope for the specified vendor class named MSUCClient.
EXAMPLE 7
PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -UserClass LabComputer -OptionId 23 -Value 2001:4898:7020:1020::20This example sets the user-class-specific DHCPv6 option value for option ID 23, or the DNS server, on the specified scope for the specified user class.
Parameters
-AsJob
ps_cimcommon_asjob
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComputerName
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the DHCP server service.
| Type: | String |
| Aliases: | Cn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DnsServer
Specifies one or more values for the DNS server option.
| Type: | IPAddress[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DomainSearchList
Specifies one or more values for the domain search list option.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Force
Specifies that the DNS server validation should not be performed. This parameter is applicable only if the DNSServer parameter or option ID 23 is specified.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InfoRefreshTime
Specifies the value for the information refresh option. This parameter value specifies an upper bound for how long a client should wait before refreshing information retrieved from DHCPv6 server. This parameter is used with stateless DHCPv6 as there are no addresses or other entities with lifetimes that can tell the client when to contact the DHCPv6 server to refresh its configuration.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-OptionId
Specifies the numeric identifier (ID) of the option for which a value is being set.
| Type: | UInt32 |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Prefix
Specifies the IPv6 subnet prefix of the scope on which the option value is being set.
| Type: | IPAddress |
| Position: | 3 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ReservedIP
Specifies the IPv6 address of the reservation for which the option value is being set.
| Type: | IPAddress |
| Aliases: | IPAddress |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserClass
Specifies the option value for the specified user class.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Value
Specifies the value being set for the option.
| Type: | String[] |
| Position: | 2 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-VendorClass
Specifies the option value for the specified vendor class.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Outputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Related Links
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for