Export (0) Print
Expand All
Expand Minimize
This topic has not yet been rated - Rate this topic

Set-CsClsConfiguration

Lync Server 2013
 

Topic Last Modified: 2013-03-07

Modifies an existing collection of centralized logging configuration settings. Centralized logging provides a way for administrators to simultaneously enable or disable tracing on multiple computers. This cmdlet was introduced in Lync Server 2013.

Set-CsClsConfiguration [-Identity <XdsIdentity>] <COMMON PARAMETERS>
Set-CsClsConfiguration [-Instance <PSObject>] <COMMON PARAMETERS>
COMMON PARAMETERS: [-CacheFileLocalFolders <String>] [-CacheFileLocalMaxDiskUsage <UInt32>] [-CacheFileLocalRetentionPeriod <UInt32>] [-CacheFileNetworkFolder <String>] [-ComponentThrottleLimit <UInt32>] [-ComponentThrottleSample <UInt32>] [-Confirm [<SwitchParameter>]] [-EtlFileFolder <String>] [-EtlFileRolloverMinutes <UInt32>] [-EtlFileRolloverSizeMB <UInt32>] [-Force <SwitchParameter>] [-MinimumClsAgentServiceVersion <UInt32>] [-Regions <PSListModifier>] [-Scenarios <PSListModifier>] [-SearchTerms <PSListModifier>] [-SecurityGroups <PSListModifier>] [-TmfFileSearchPath <String>] [-WhatIf [<SwitchParameter>]]

In Example 1, the global collection of centralized logging configuration settings is modified to set the maximum size of an ETL file to 40 megabytes.

Set-CsClsConfiguration -Identity "global" -EtlRolloverFileSizeMB 40

The command shown in Example 2 modifies the maximum ETL file size for all the centralized logging configuration settings in use in the organization. To do this, the command first calls the Get-CsClsConfiguration cmdlet to return a collection of all the centralized logging settings. That collection is then piped to the Set-CsClsConfiguration cmdlet, which changes the value of the EtlRolloverFileSizeMB property for each item in the collection to 40 megabytes.

Get-CsClsConfiguration | Set-CsClsConfiguration -EtlRolloverFileSizeMB 40

The centralized logging service (which replaces the OCSLogger and OCSTracer tools used in Microsoft Lync Server 2010) provides a way for administrators to manage logging and tracing for all computers and pools running Lync Server 2013. Centralized logging enables administrators to stop, start, and configure logging for one or more pools and computers by using a single command; for example, you can use one command to enable Address Book service logging on all your Address Book servers. This differs from the OCSLogger and OCSTracer tools, which had to be individually managed (including individually stopped and started) on each server. In addition, the centralized logging service also provides a way for administrators to search trace logs from the command, using the Windows PowerShell command-line interface and the Search-CsClsLogging cmdlet.

Centralized logging is built around a series of predefined scenarios that offer a more finely-targeted approach to logging than offered in previous versions of Lync Server. These scenarios predetermine the server components and logging for you; as a result, an administrator enabling the RGS scenario can be confident that he or she will only log information relevant to the Response Group service and not to, say, the audio conferencing provider service.

It is also possible to define custom scenarios by using the New-CsClsScenario cmdlet.

Centralized logging is managed by using collections of centralized logging service configuration settings. When you install Lync Server 2013, you install a global set of these configuration settings; in addition, administrators can add custom settings collections at the site scope. Administrators can use the Set-CsClsConfiguration cmdlet to modify any of these settings.

To return a list of all the role-based access control (RBAC) roles this cmdlet has been assigned to (including any custom RBAC roles you have created yourself), run the following command from the Windows PowerShell prompt:

Get-CsAdminRole | Where-Object {$_.Cmdlets –match "Set-CsClsConfiguration"}

Lync Server Control Panel: The functions carried out by the Set-CsClsConfiguration cmdlet are not available in the Lync Server Control Panel.

 

Parameter Required Type Description

CacheFileLocalFolders

Optional

System.String

One or more full paths to the local folders where the cache files will be stored. The default value is %TEMP%\Tracing. If more than one path is specified, then separate them with semi-colons.

CacheFileLocalMaxDiskUsage

Optional

System.UInt32

Maximum amount of disk space (percentage) that can be used for the cache files. The default value is 80.

CacheFileLocalRetentionPeriod

Optional

System.UInt32

Maximum number of days that cache files are retained locally. The default value is 14.

CacheFileNetworkFolder

Optional

System.String

Full UNC path to the network cache folder. There is no default value.

ComponentThrottleLimit

Optional

System.UInt32

Maximum rate at which a component is allowed to generate trace records before its tracing is throttled. The default value is 5000 trace calls per second.

The default value is 5000.

ComponentThrottleSample

Optional

System.UInt32

Maximum number of times the ComponentThrottleLimit can be exceeded within a one minute interval. The default value is 3.

Confirm

Optional

System.Management.Automation.SwitchParameter

Prompts you for confirmation before executing the command.

EtlFileFolder

Optional

System.String

Full path to the folder where the event log trace files will be stored. The default value is %TEMP%\Tracing. Note that %TEMP% is evaluated in the contents of the CLS Service so it actual expands to %WINDIR%\ServiceProfiles\NetworkService\AppData\Local

EtlFileRolloverMinutes

Optional

System.UInt32

Maximum amount of time (in minutes) that can elapse before a new event log trace file is created. (This new file will be created even if the existing trace file has not reached the specified rollover size.) The default value is 60.

EtlFileRolloverSizeMB

Optional

System.UInt32

Maximum size (in megabytes) that at event trace log file can reach before a new file is created. The default value is 20.

Force

Optional

System.Management.Automation.SwitchParameter

Suppresses the display of any non-fatal error message that might occur when running the command.

Identity

Optional

Microsoft.Rtc.Management.Xds.XdsIdentity

Unique identifier of the centralized logging configuration settings to be modified. To refer to the global settings, use this syntax:

-Identity global

To refer to site settings, use syntax similar to this:

-Identity site:Redmond

You cannot use wildcards when specifying an Identity.

Instance

Optional

System.Management.Automation.PSObject

Allows you to pass a reference to an object rather than set individual parameter values.

MinimumClsAgentServiceVersion

Optional

System.UInt32

Specifies the minimum version of the centralized logging service agent to be used when logging data; any computers with an agent version lower than the minimum value will be excluded from the logging operations. The default value is 6, representing Lync Server 2013. This parameter is intended for use with Lync Online.

Regions

Optional

System.Management.Automation.PSListModifier

Collection of regions defined for the centralized logging configuration settings. Regions are defined using the New-CsClsRegion cmdlet.

This parameter is intended for use with Lync Online.

Scenarios

Optional

System.Management.Automation.PSListModifier

Collection of components/situations that can be traced using centralized logging. Scenarios are managed using the CsClsScenario cmdlets.

SearchTerms

Optional

System.Management.Automation.PSListModifier

Collection of terms that help determine the personally identifiable information available to technical support personnel who search the centralized logging files. Search terms are managed using the CsClsSearchTerm cmdlets.

SecurityGroups

Optional

System.Management.Automation.PSListModifier

Security groups who are allowed to access the log files.

This parameter is intended for use with Lync Online.

TmfFileSearchPath

Optional

System.String

Search path for TMF (trace message format) files. TMF files convert binary trace messages to a human-readable format.

WhatIf

Optional

System.Management.Automation.SwitchParameter

Describes what would happen if you executed the command without actually executing the command.

The Set-CsClsConfiguration cmdlet accepts pipelined instances of the icrosoft.Rtc.Management.WritableConfig.Settings.CentralizedLogging.CentralizedLoggingConfiguration object.

None. Instead, the Set-CsClsConfiguration cmdlet modifies existing instances of the icrosoft.Rtc.Management.WritableConfig.Settings.CentralizedLogging.CentralizedLoggingConfiguration object.

 
Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft. All rights reserved.