Microsoft Security Bulletin MS14-084 - Critical

Vulnerability in VBScript Scripting Engine Could Allow Remote Code Execution (3016711)

Published: December 9, 2014

Version: 1.0

Executive Summary

This security update resolves a privately reported vulnerability in the VBScript scripting engine in Microsoft Windows. The vulnerability could allow remote code execution if a user visits a specially crafted website. An attacker who successfully exploited this vulnerability could gain the same user rights as the current user. If the current user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

This security update is rated Critical for affected versions of the VBScript scripting engine on affected Windows clients and Moderate for affected versions of the VBScript scripting engine on affected Windows servers. For more information, see the Affected Software section.

The security update addresses the vulnerability by modifying how the VBScript scripting engine handles objects in memory. For more information about the vulnerability, see the Vulnerability Information section.

For more information about this update, see Microsoft Knowledge Base Article 3016711.

Affected Software

The following versions of VBScript are affected by the vulnerability discussed in this bulletin. Earlier versions or editions that are not listed are either past their support life cycle or are not affected. The following affected software apply to systems with Internet Explorer 8 or earlier installed and to systems without Internet Explorer installed. Customers with systems running Internet Explorer 9 or later should apply Internet Explorer Cumulative Update 3008923 (MS14-080), which also addresses the vulnerability discussed in this bulletin.

Affected Software 

Operating System Component Maximum Security Impact Aggregate Severity Rating Updates Replaced
Windows Server 2003
Windows Server 2003 Service Pack 2 VBScript 5.6 \ (3012168) Remote Code Execution Moderate 2909213 in \ MS14-011
Windows Server 2003 Service Pack 2 VBScript 5.7\   (3012172) Remote Code Execution Moderate 2909212 in \ MS14-011
Windows Server 2003 Service Pack 2 VBScript 5.8 \ (3012176) Remote Code Execution Moderate 2909210 in \ MS14-011
Windows Server 2003 x64 Edition Service Pack 2 VBScript 5.6\   (3012168) Remote Code Execution Moderate 2909213 in \ MS14-011
Windows Server 2003 x64 Edition Service Pack 2 VBScript 5.7 \ (3012172) Remote Code Execution Moderate 2909212 in \ MS14-011
Windows Server 2003 x64 Edition Service Pack 2 VBScript 5.8\   (3012176) Remote Code Execution Moderate 2909210 in \ MS14-011
Windows Server 2003 with SP2 for Itanium-based Systems VBScript 5.6 \ (3012168) Remote Code Execution Moderate 2909213 in \ MS14-011
Windows Server 2003 with SP2 for Itanium-based Systems VBScript 5.7\   (3012172) Remote Code Execution Moderate 2909212 in \ MS14-011
Windows Vista
Windows Vista Service Pack 2 VBScript 5.7 \ (3012172) Remote Code Execution Critical 2909212 in \ MS14-011
Windows Vista Service Pack 2 VBScript 5.8  (Only for systems with IE8)[1]\ (3012176) Remote Code Execution Critical 2909210 in \ MS14-011
Windows Vista x64 Edition Service Pack 2 VBScript 5.7\   (3012172) Remote Code Execution Critical 2909212 in \ MS14-011
Windows Vista x64 Edition Service Pack 2 VBScript 5.8  (Only for systems with IE8)[1]\ (3012176) Remote Code Execution Critical 2909210 in \ MS14-011
Windows Server 2008
Windows Server 2008 for 32-bit Systems Service Pack 2 VBScript 5.7 \ (3012172) Remote Code Execution Moderate 2909212 in \ MS14-011
Windows Server 2008 for 32-bit Systems Service Pack 2 VBScript 5.8  (Only for systems with IE8)[1]\ (3012176) Remote Code Execution Moderate 2909210 in \ MS14-011
Windows Server 2008 for x64-based Systems Service Pack 2 VBScript 5.7 \ (3012172) Remote Code Execution Moderate 2909212 in \ MS14-011
Windows Server 2008 for x64-based Systems Service Pack 2 VBScript 5.8  (Only for systems with IE8)[1]\ (3012176) Remote Code Execution Moderate 2909210 in \ MS14-011
Windows Server 2008 for Itanium-based Systems Service Pack 2 VBScript 5.7 \ (3012172) Remote Code Execution Moderate 2909212 in \ MS14-011
Windows 7
Windows 7 for 32-bit Systems Service Pack 1 VBScript 5.8  (Only for systems with IE8)[1]\ (3012176) Remote Code Execution Critical 2909210 in \ MS14-011
Windows 7 for x64-based Systems Service Pack 1 VBScript 5.8  (Only for systems with IE8)[1]\ (3012176) Remote Code Execution Critical 2909210 in \ MS14-011
Windows Server 2008 R2
Windows Server 2008 R2 for x64-based Systems Service Pack 1 VBScript 5.8  (Only for systems with IE8)[1]\ (3012176) Remote Code Execution Moderate 2909210 in \ MS14-011
Windows Server 2008 R2 for Itanium-based Systems Service Pack 1 VBScript 5.8  (Only for systems with IE8)[1]\ (3012176) Remote Code Execution Moderate 2909210 in \ MS14-011
Server Core installation
Windows Server 2008 for 32-bit Systems Service Pack 2 VBScript 5.7  \ (3012172) None No severity rating[2] 2909212 in \ MS14-011
Windows Server 2008 for 32-bit Systems Service Pack 2 VBScript 5.8 \ (3012176) None No severity rating[2] 2909210 in \ MS14-011
Windows Server 2008 for x64-based Systems Service Pack 2 VBScript 5.7\   (3012172) None No severity rating[2] 2909212 in \ MS14-011
Windows Server 2008 for x64-based Systems Service Pack 2 VBScript 5.8 \ (3012176) None No severity rating[2] 2909210 in \ MS14-011
Windows Server 2008 R2 for x64-based Systems Service Pack 1 VBScript 5.8 \ (3012176) None No severity rating[2] 2909210 in \ MS14-011

Note An update for VBScript 5.8 is available for Windows Technical Preview and Windows Server Technical Preview and is provided by way of Internet Explorer Cumulative Update 3008923 (MS14-080). Customer who are running Preview editions are encouraged to apply the update, which is available via Windows Update.

[1]This update applies to systems with Internet Explorer 8 installed. Customers with systems running Internet Explorer 9 or later should apply Internet Explorer Cumulative Update 3008923 (MS14-080), which also addresses the vulnerability discussed in this bulletin.

[2]Severity ratings do not apply to this update for the specified software because the known attack vectors through Internet Explorer for the vulnerability discussed in this bulletin are blocked. However, as a defense-in-depth measure, Microsoft recommends that customers of this software apply this security update to help protect against any possible new attack vectors identified in the future.

 

Update FAQ

How do I determine which version of the VBScript scripting engine is installed on my system?   The VBScript scripting engine is installed with supported releases of Microsoft Windows. In addition, installing a newer version of Internet Explorer on a system can change the version of the VBScript scripting engine that is installed.

To determine which version of the VBScript scripting engine is installed on your system, perform the following steps:

  1. Open Windows Explorer.
  2. Navigate to the %systemroot%\system32 directory.
  3. Right-click vbscript.dll, select Properties, and then click the Details.

The version number is listed in the File Version field. If your file version starts with 5.8, for example 5.8.7600.16385, then VBScript 5.8 is installed on your system.

Once I know the version of the VBScript scripting engine installed on my system, where do I get the update?
The affected software in this bulletin apply to systems without Internet Explorer installed and to systems with Internet Explorer 8 or earlier versions installed. Customers with systems running Internet Explorer 9 or later should apply the Internet Explorer Cumulative Update (MS14-080), which also addresses the vulnerability discussed in this bulletin.

The following table summarizes which bulletin provides the update by version of VBScript and Internet Explorer.

Version MS14-084 MS14-080
VBScript 5.6\ (Internet Explorer 6) VBScript 5.6 \ (3012168) Not applicable
VBScript 5.7\ (Internet Explorer 6 and Internet Explorer 7) VBScript 5.7 \ (3012172) Not applicable
VBScript 5.8\ (Internet Explorer 8) VBScript 5.8 \ (3012176) Not applicable
VBScript 5.8\ (Internet Explorer 9) Not applicable Internet Explorer 9 \ (3008923)
VBScript 5.8\ (Internet Explorer 10) Not applicable Internet Explorer 10 \ (3008923)
VBScript 5.8\ (Internet Explorer 11) Not applicable Internet Explorer 11 \ (3008923)

Severity Ratings and Vulnerability Identifiers

The following severity ratings assume the potential maximum impact of the vulnerability. For information regarding the likelihood, within 30 days of this security bulletin's release, of the exploitability of the vulnerability in relation to its severity rating and security impact, please see the Exploitability Index in the December bulletin summary.

Vulnerability Severity Rating and Maximum Security Impact by Affected Software
Affected Software VBScript Memory Corruption Vulnerability - CVE-2014-6363 Aggregate Severity Rating
VBScript 5.6 (Internet Explorer 6)
VBScript 5.6 on Windows Server 2003 Service Pack 2 Moderate Remote Code Execution Moderate
VBScript 5.6 on Windows Server 2003 x64 Edition Service Pack 2 Moderate Remote Code Execution Moderate
VBScript 5.6 on Windows Server 2003 with SP2 for Itanium-based Systems ModerateRemote Code Execution Moderate
VBScript 5.7 (Internet Explorer 7)
VBScript 5.7 on Windows Server 2003 Service Pack 2 ModerateRemote Code Execution Moderate
VBScript 5.7 on Windows Server 2003 x64 Edition Service Pack 2 ModerateRemote Code Execution Moderate
VBScript 5.7 on Windows Server 2003 with SP2 for Itanium-based Systems ModerateRemote Code Execution Moderate
VBScript 5.7 on Windows Vista Service Pack 2 CriticalRemote Code Execution Critical
VBScript 5.7 on Windows Vista x64 Edition Service Pack 2 CriticalRemote Code Execution Critical
VBScript 5.7 on Windows Server 2008 for 32-bit Systems Service Pack 2 ModerateRemote Code Execution Moderate
VBScript 5.7 on Windows Server 2008 for 32-bit Systems Service Pack 2 (Server Core installation) NoneNo severity rating None
VBScript 5.7 on Windows Server 2008 for x64-based Systems Service Pack 2 ModerateRemote Code Execution Moderate
VBScript 5.7 on Windows Server 2008 for x64-based Systems Service Pack 2 (Server Core installation) None \ No severity rating None
VBScript 5.7 on Windows Server 2008 for Itanium-based Systems Service Pack 2 ModerateRemote Code Execution Moderate
VBScript 5.8 (Internet Explorer 8)
VBScript 5.8 on Windows Server 2003 Service Pack 2 ModerateRemote Code Execution Moderate
VBScript 5.8 on Windows Server 2003 x64 Edition Service Pack 2 ModerateRemote Code Execution Moderate
VBScript 5.8 on Windows Vista Service Pack 2 CriticalRemote Code Execution Critical
VBScript 5.8 on Windows Vista x64 Edition Service Pack 2 CriticalRemote Code Execution Critical
VBScript 5.8 on Windows Server 2008 for 32-bit Systems Service Pack 2 ModerateRemote Code Execution Moderate
VBScript 5.8 on Windows Server 2008 for 32-bit Systems Service Pack 2 (Server Core installation) NoneNo severity rating None
VBScript 5.8 on Windows Server 2008 for x64-based Systems Service Pack 2 ModerateRemote Code Execution Moderate
VBScript 5.8 on Windows Server 2008 for x64-based Systems Service Pack 2 (Server Core installation) NoneNo severity rating None
VBScript 5.8 on Windows 7 for 32-bit Systems Service Pack 1 CriticalRemote Code Execution Critical
VBScript 5.8 on Windows 7 for x64-based Systems Service Pack 1 CriticalRemote Code Execution Critical
VBScript 5.8 on Windows Server 2008 R2 for x64-based Systems Service Pack 1 ModerateRemote Code Execution Moderate
VBScript 5.8 on Windows Server 2008 R2 for x64-based Systems Service Pack 1 (Server Core installation) NoneNo severity rating None
VBScript 5.8 on Windows Server 2008 R2 for Itanium-based Systems Service Pack 1 ModerateRemote Code Execution Moderate

Vulnerability Information

VBScript Memory Corruption Vulnerability - CVE-2014-6363

A remote code execution vulnerability exists in the way that the VBScript engine, when rendered in Internet Explorer, handles objects in memory. In a web-based attack scenario, an attacker could host a specially crafted website that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the website. An attacker could also embed an ActiveX control marked "safe for initialization" in an application or Microsoft Office document that hosts the IE rendering engine. The attacker could also take advantage of compromised websites and websites that accept or host user-provided content or advertisements. These websites could contain specially crafted content that could exploit this vulnerability.

An attacker who successfully exploited this vulnerability could gain the same user rights as the current user. If the current user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. The update addresses the vulnerability by modifying how the VBScript scripting engine handles objects in memory.

Microsoft received information about this vulnerability through coordinated vulnerability disclosure. When this security bulletin was originally issued, Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers.

Mitigating Factors

Microsoft has not identified any mitigating factors for this vulnerability.

Workarounds

Microsoft has not identified any workarounds for this vulnerability.

Security Update Deployment

For Security Update Deployment information, see the Microsoft Knowledge Base article referenced in the Executive Summary.

Acknowledgments

Microsoft recognizes the efforts of those in the security community who help us protect customers through coordinated vulnerability disclosure. See Acknowledgments for more information.

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions

  • V1.0 (December 9, 2014): Bulletin published.

Page generated 2015-01-14 12:24Z-08:00.