Microsoft Security Bulletin MS11-023 - Important
Vulnerabilities in Microsoft Office Could Allow Remote Code Execution (2489293)
Published:
Version: 1.0
General Information
Executive Summary
This security update resolves one publicly disclosed vulnerability and one privately reported vulnerability in Microsoft Office. The vulnerabilities could allow remote code execution if a user opens a specially crafted Office file or if a user opens a legitimate Office file that is located in the same network directory as a specially crafted library file. An attacker who successfully exploited either of these vulnerabilities could gain the same user rights as the logged on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
This security update is rated Important for all supported editions of Microsoft Office XP, Microsoft Office 2003, Microsoft Office 2007, Microsoft Office 2004 for Mac, and Microsoft Office 2008 for Mac; and Open XML File Format Converter for Mac. For more information, see the subsection, Affected and Non-Affected Software, in this section.
The security update addresses the vulnerabilities by correcting the way that Microsoft Office handles graphic objects in specially crafted Office files and by correcting the manner in which Microsoft Office loads external libraries. For more information about the vulnerabilities, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.
Recommendation. Customers can configure automatic updating to check online for updates from Microsoft Update by using the Microsoft Update service. Customers who have automatic updating enabled and configured to check online for updates from Microsoft Update typically will not need to take any action because this security update will be downloaded and installed automatically. Customers who have not enabled automatic updating need to check for updates from Microsoft Update and install this update manually. For information about specific configuration options in automatic updating in supported editions of Windows XP and Windows Server 2003, see Microsoft Knowledge Base Article 294871. For information about automatic updating in supported editions of Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2, see Understanding Windows automatic updating.
For administrators and enterprise installations, or end users who want to install this security update manually, Microsoft recommends that customers apply the update at the earliest opportunity using update management software, or by checking for updates using the Microsoft Update service.
Known Issues. Microsoft Knowledge Base Article 2489293 documents the currently known issues that customers may experience when installing this security update. The article also documents recommended solutions for these issues. When currently known issues and recommended solutions pertain only to specific releases of this software, this article provides links to further articles.
Affected and Non-Affected Software
The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.
Affected Software
| Microsoft Office Suite and Other Software | Maximum Security Impact | Aggregate Severity Rating | Bulletins Replaced by this Update |
|---|---|---|---|
| Microsoft Office Suites | |||
| Microsoft Office XP Service Pack 3 (KB2509461) | Remote Code Execution | Important | MS10-087 |
| Microsoft Office 2003 Service Pack 3 (KB2509503) | Remote Code Execution | Important | MS10-087 |
| Microsoft Office 2007 Service Pack 2 (KB2509488) | Remote Code Execution | Important | MS10-087 |
| Microsoft Office for Mac | |||
| Microsoft Office 2004 for Mac (KB2505924) | Remote Code Execution | Important | None |
| Microsoft Office 2008 for Mac (KB2505927) | Remote Code Execution | Important | MS10-087 |
| Open XML File Format Converter for Mac (KB2505935) | Remote Code Execution | Important | MS10-087 |
Non-Affected Software
| Office and Other Software |
|---|
| Microsoft Office 2010 (32-bit editions) |
| Microsoft Office 2010 (64-bit editions) |
| Microsoft Office for Mac 2011 |
| Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats Service Pack 2 |
| Microsoft Word Viewer |
| Microsoft Excel Viewer Service Pack 2 |
| Microsoft PowerPoint Viewer Service Pack 2 |
| Microsoft Visio 2007 Viewer Service Pack 2 |
| Microsoft Visio 2010 Viewer |
| Microsoft Works 9 |
Frequently Asked Questions (FAQ) Related to This Security Update
Where are the file information details?
Refer to the reference tables in the Security Update Deployment section for the location of the file information details.
Why does this update address several reported security vulnerabilities?
This update contains support for several vulnerabilities because the modifications that are required to address these issues are located in related files. Instead of having to install several updates that are almost the same, customers need to install this update only.
Is this update related to Microsoft Security Advisory 2269637?
Yes, the Office Component Insecure Library Loading Vulnerability (CVE-2011-0107) addressed by this update is related to the class of vulnerabilities, described in Microsoft Security Advisory 2269637, that affects how applications load external libraries. This security update addresses a particular instance of this type of vulnerability.
Does this update contain any security-related changes to functionality?
Yes. The updates for Microsoft Office 2003 Service Pack 3 (KB2509503) and Microsoft Office 2007 Service Pack 2 (KB2509488), in conjunction with updates for Microsoft Word, Microsoft Excel, and Microsoft PowerPoint, provide support for the Office File Validation feature. For more information about the Office File Validation feature, see Microsoft Security Advisory 2501584.
How is this security update related to MS11-029?
The security update package for Microsoft Office XP (KB2509461) offered in this bulletin also addresses the vulnerability described in the MS11-029 security bulletin. Users with Microsoft Office XP installed only need to install either security update package.
How is this security update related to MS10-087 and MS10-088?
The Microsoft Office 2004 for Mac (KB2505924) update offered in this bulletin also addresses the vulnerabilities described in the MS10-087 and MS10-088 security bulletins.
MS11-022 and MS11-021 also describe vulnerabilities in Microsoft Office 2004 for Mac, Microsoft Office 2008 for Mac, and Open XML File Format Converter for Mac. How do MS11-022 and MS11-021 relate to this bulletin, MS11-023?
The security update packages for Microsoft Office 2004 for Mac (KB2505924), Microsoft Office 2008 for Mac (KB2505927), and Open XML File Format Converter for Mac (KB2505935) offered in this bulletin also address the vulnerabilities described in the MS11-022 and MS11-021 security bulletins. Users with Microsoft Office 2004 for Mac, Microsoft Office 2008 for Mac, or Open XML File Format Converter for Mac installed will only need to install these security update packages once.
I have a non-vulnerable version of software installed, why am I being offered this update?
Some non-affected software, including Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats, Microsoft Word Viewer, Microsoft Excel Viewer, and Microsoft PowerPoint Viewer, contain the vulnerable shared component of Microsoft Office, but because they do not access the vulnerable code, they are not affected by this vulnerability. However, since the vulnerable code is present, this update will be offered.
Does the offer to update a non-vulnerable version of Microsoft Office constitute an issue in the Microsoft update mechanism?
No, the update mechanism is functioning correctly in that it detects a lower version of the files on the system than in the update package and thus, offers the update.
How are Microsoft Office standalone programs affected by the vulnerability?
A Microsoft Office standalone program is affected with the same severity rating as the corresponding Microsoft Office Suite. For example, a standalone installation of Microsoft Excel is affected with the same severity rating as an installation of the affected Microsoft Office Suite.
I am using an older release of the software discussed in this security bulletin. What should I do?
The affected software listed in this bulletin have been tested to determine which releases are affected. Other releases are past their support life cycle. For more information about the product lifecycle, visit the Microsoft Support Lifecycle Web site.
It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. To determine the support lifecycle for your software release, see Select a Product for Lifecycle Information. For more information about service packs for these software releases, see Lifecycle Supported Service Packs.
Customers who require custom support for older software must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country in the Contact Information list, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Microsoft Support Lifecycle Policy FAQ.
Vulnerability Information
Severity Ratings and Vulnerability Identifiers
The following severity ratings assume the potential maximum impact of the vulnerability. For information regarding the likelihood, within 30 days of this security bulletin's release, of the exploitability of the vulnerability in relation to its severity rating and security impact, please see the Exploitability Index in the April bulletin summary. For more information, see Microsoft Exploitability Index.
| Affected Software | Office Component Insecure Library Loading Vulnerability - CVE-2011-0107 | Microsoft Office Graphic Object Dereferencing Vulnerability - CVE-2011-0977 | Aggregate Severity Rating |
|---|---|---|---|
| Microsoft Office Suites | |||
| Microsoft Office XP Service Pack 3 | Important Remote Code Execution | Important Remote Code Execution | Important |
| Microsoft Office 2003 Service Pack 3 | Important Remote Code Execution | Important Remote Code Execution | Important |
| Microsoft Office 2007 Service Pack 2 | Important Remote Code Execution | Important Remote Code Execution | Important |
| Microsoft Office for Mac | |||
| Microsoft Office 2004 for Mac | Not applicable | Important Remote Code Execution | Important |
| Microsoft Office 2008 for Mac | Not applicable | Important Remote Code Execution | Important |
| Open XML File Format Converter for Mac | Not applicable | Important Remote Code Execution | Important |
Office Component Insecure Library Loading Vulnerability - CVE-2011-0107
A remote code execution vulnerability exists in the way that Microsoft Office handles the loading of DLL files. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2011-0107.
Mitigating Factors for Office Component Insecure Library Loading Vulnerability - CVE-2011-0107
Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:
- For an attack to be successful, a user must visit an untrusted remote file system location or WebDAV share and open an Office-related file (such as a .docx file).
- The file sharing protocol, Server Message Block (SMB), is often disabled on the perimeter firewall. This limits the potential attack vectors for this vulnerability.
- An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
Workarounds for Office Component Insecure Library Loading Vulnerability - CVE-2011-0107
Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:
- Disable loading of libraries from WebDAV and remote network shares
Note See Microsoft Knowledge Base Article 2264107 to deploy a workaround tool that allows customers to disable the loading of libraries from remote network or WebDAV shares. This tool can be configured to disallow insecure loading on a per-application or a global system basis.
Customers who are informed by their vendor of an application being vulnerable can use this tool to help protect against attempts to exploit this issue.
Note See Microsoft Knowledge Base Article 2264107 to use the automated Microsoft Fix it solution to deploy the registry key to block loading of libraries for SMB and WebDAV shares. Note that this Fix it solution does require you to install the workaround tool also described in Microsoft Knowledge Base Article 2264107 first. This Fix it solution only deploys the registry key and requires the workaround tool in order to be effective. We recommend that administrators review the KB article closely prior to deploying this Fix it solution.
- Disable the WebClient service
Disabling the WebClient service helps protect affected systems from attempts to exploit this vulnerability by blocking the most likely remote attack vector through the Web Distributed Authoring and Versioning (WebDAV) client service. After applying this workaround it is still possible for remote attackers who successfully exploit this vulnerability to cause the system to run programs located on the targeted user's computer or the Local Area Network (LAN), but users will be prompted for confirmation before opening arbitrary programs from the Internet.
To disable the WebClient Service, follow these steps:
- Click Start, click Run, type Services.msc and then click OK.
- Right-click WebClient service and select Properties.
- Change the Startup type to Disabled. If the service is running, click Stop.
- Click OK and exit the management application.
Impact of workaround. When the WebClient service is disabled, Web Distributed Authoring and Versioning (WebDAV) requests are not transmitted. In addition, any services that explicitly depend on the Web Client service will not start, and an error message will be logged in the System log. For example, WebDAV shares will be inaccessible from the client computer.
How to undo the workaround.
To re-enable the WebClient Service, follow these steps:
- Click Start, click Run, type Services.msc and then click OK.
- Right-click WebClient service and select Properties.
- Change the Startup type to Automatic. If the service is not running, click Start.
- Click OK and exit the management application.
- Block TCP ports 139 and 445 at the firewall
These ports are used to initiate a connection with the affected component. Blocking TCP ports 139 and 445 at the firewall will help protect systems that are behind that firewall from attempts to exploit this vulnerability. Microsoft recommends that you block all unsolicited inbound communication from the Internet to help prevent attacks that may use other ports. For more information about ports, see the TechNet article, TCP and UDP Port Assignments.
Impact of workaround. Several Windows services use the affected ports. Blocking connectivity to the ports may cause various applications or services to not function. Some of the applications or services that could be impacted are listed below:
- Applications that use SMB (CIFS)
- Applications that use mailslots or named pipes (RPC over SMB)
- Server (File and Print Sharing)
- Group Policy
- Net Logon
- Distributed File System (DFS)
- Terminal Server Licensing
- Print Spooler
- Computer Browser
- Remote Procedure Call Locator
- Fax Service
- Indexing Service
- Performance Logs and Alerts
- Systems Management Server
- License Logging Service
How to undo the workaround. Unblock TCP ports 139 and 445 at the firewall. For more information about ports, see TCP and UDP Port Assignments.
FAQ for Office Component Insecure Library Loading Vulnerability - CVE-2011-0107
What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
What causes the vulnerability?
The vulnerability is caused when Microsoft Office incorrectly restricts the path used for loading external libraries.
How is Microsoft Office affected by this vulnerability?
Although the known attack vectors can only leverage Microsoft Word, the vulnerable code exists in a shared component of Microsoft Office.
What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could run arbitrary code as the logged-on user. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. If a user is logged-on with administrative user rights, an attacker could take complete control of the affected system. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
How could an attacker exploit the vulnerability?
An attacker could convince a user to open a legitimate Office-related file (such as a .docx file) that is located in the same network directory as a specially crafted dynamic link library (DLL) file. Then, while opening the legitimate file, Microsoft Office could attempt to load the DLL file and execute any code it contained.
In an e-mail attack scenario, an attacker could exploit the vulnerability by sending a legitimate Office-related file attachment (such as a .docx file) to a user, and convincing the user to place the attachment into a directory containing a specially crafted DLL file and to open the legitimate file. Then, while opening the legitimate file, Microsoft Office could attempt to load the DLL file and execute any code it contained.
In a network attack scenario, an attacker could place a legitimate Office-related file and a specially crafted DLL in a network share, a UNC, or WebDAV location and then convince the user to open the file.
What systems are primarily at risk from the vulnerability?
Systems where Microsoft Office is used, including workstations and terminal servers, are primarily at risk. Servers could be at more risk if administrators allow users to log on to servers and to run programs. However, best practices strongly discourage allowing this.
What does the update do?
The update addresses this vulnerability by correcting the manner in which Microsoft Office loads external libraries.
Is this vulnerability related to Microsoft Security Advisory 2269637?
Yes, this vulnerability is related to the class of vulnerabilities, described in Microsoft Security Advisory 2269637, that affects how applications load external libraries. This security update addresses a particular instance of this type of vulnerability.
When this security bulletin was issued, had this vulnerability been publicly disclosed?
Yes. This vulnerability has been publicly disclosed. It has been assigned Common Vulnerability and Exposure number CVE-2011-0107.
When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.
Does applying this security update help protect customers from the code, published publicly, that could attempt to exploit this vulnerability?
Yes. This security update addresses the vulnerability that potentially could be exploited by using the published proof of concept code. The vulnerability that has been addressed has been assigned Common Vulnerability and Exposure number CVE-2011-0107.
Microsoft Office Graphic Object Dereferencing Vulnerability - CVE-2011-0977
A remote code execution vulnerability exists in the way that Microsoft Office handles graphic objects when parsing a specially crafted Office file. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2011-0977.
Mitigating Factors for Microsoft Office Graphic Object Dereferencing Vulnerability - CVE-2011-0977
Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:
- An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
- The vulnerability cannot be exploited automatically through e-mail. For an attack to be successful, a user must open an attachment that is sent in an e-mail message.
- In a Web-based attack scenario, an attacker would have to host a Web site that contains a specially crafted Office file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link that takes users to the attacker's Web site, and then convince them to open a specially crafted Office file.
Workarounds for Microsoft Office Graphic Object Dereferencing Vulnerability - CVE-2011-0977
Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality.
- Use Microsoft Office File Block policy to block the opening of Office 2003 and earlier documents in Microsoft Excel from unknown or untrusted sources and locations
The following registry scripts can be used to set the File Block policy.
Note Modifying the Registry incorrectly can cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that problems resulting from incorrect modification of the Registry can be solved. Modify the Registry at your own risk.
For Office 2003
Windows Registry Editor Version 5.00[HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Excel\Security\FileOpenBlock]"BinaryFiles"=dword:00000001
Note In order to use 'FileOpenBlock' with Microsoft Office 2003, all of the latest security updates for Microsoft Office 2003 must be applied.For Office 2007
Windows Registry Editor Version 5.00[HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\12.0\Excel\Security\FileOpenBlock]"BinaryFiles"=dword:00000001
Note In order to use 'FileOpenBlock' with Microsoft Office 2007, all of the latest security updates for Office 2007 must be applied.Impact of workaround. For Microsoft Office 2003 and Microsoft Office 2007, users who have configured the File Block policy and have not configured a special exempt directory or have not moved files to a trusted location as discussed in Microsoft Knowledge Base Article 922848 will be unable to open Office 2003 files or earlier versions.
How to undo the workaround.
For Office 2003
Windows Registry Editor Version 5.00[HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Excel\Security\FileOpenBlock]"BinaryFiles"=dword:00000000For Office 2007
Windows Registry Editor Version 5.00[HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\12.0\Excel\Security\FileOpenBlock]"BinaryFiles"=dword:00000000 - Use the Microsoft Office Isolated Conversion Environment (MOICE) when opening files from unknown or untrusted sources
The Microsoft Office Isolated Conversion Environment (MOICE) helps protect Office 2003 installations by more securely opening Word, Excel, and PowerPoint binary format files.
To install MOICE, you must have Office 2003 or Office 2007 installed.
To install MOICE, you must also have the Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats. The compatibility pack is available as a free download from the Microsoft Download Center.
MOICE requires all updates that are recommended for all Office programs. Visit Microsoft Update to install all recommended updates.
Enable MOICE
Note See Microsoft Knowledge Base Article 935865 to use the automated Microsoft Fix it solution to enable or disable this workaround.
To manually enable MOICE, run the commands as specified in the following table. Running the commands will associate the Office application extensions with MOICE.
Command to enable MOICE to be the registered handler For Word, run the following command from a command prompt:
ASSOC .doc=oice.word.documentFor Excel, run the following commands from a command prompt:
ASSOC .XLS=oice.excel.sheet
ASSOC .XLT=oice.excel.template
ASSOC .XLA=oice.excel.addinFor PowerPoint, run the following commands from a command prompt:
ASSOC .PPT=oice.powerpoint.show
ASSOC .POT=oice.powerpoint.template
ASSOC .PPS=oice.powerpoint.slideshowNote On Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2, run the above commands from an elevated command prompt.
For more information on MOICE, see Microsoft Knowledge Base Article 935865.
Impact of workaround. Office 2003 and earlier formatted documents that are converted to the Microsoft Office 2007 Open XML format by MOICE will not retain macro functionality. Additionally, documents with passwords or that are protected with Digital Rights Management cannot be converted.
How to undo the workaround. Run the commands to disable MOICE as specified in the table below.
Command to disable MOICE as the registered handler For Word, run the following command from a command prompt:
ASSOC .doc=Word.Document.8For Excel, run the following commands from a command prompt:
ASSOC .xls=Excel.Sheet.8
ASSOC .xlt=Excel.Template
ASSOC .xla=Excel.AddinFor PowerPoint, run the following commands from a command prompt:
ASSOC .ppt=PowerPoint.Show.8
ASSOC .PPS=oice.powerpoint.slideshow
ASSOC .pps=PowerPoint.SlideShow.8Note On Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2, run the above commands from an elevated command prompt.
- Do not open Office files that you receive from untrusted sources or that you receive unexpectedly from trusted sources
Do not open Office files that you receive from untrusted sources or that you receive unexpectedly from trusted sources. This vulnerability could be exploited when a user opens a specially crafted file.
FAQ for Microsoft Office Graphic Object Dereferencing Vulnerability - CVE-2011-0977
What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs or view, change, or delete data; or create new accounts with full user rights.
What causes the vulnerability?
The vulnerability is caused when Microsoft Office does not properly handle dereferencing data structures when parsing a specially crafted Office file that contains graphic objects.
What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could run arbitrary code as the logged-on user. If a user is logged on with administrative user rights, an attacker could take complete control of the affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
How could an attacker exploit the vulnerability?
Although the vulnerable code exists in a shared component of Microsoft Office, the known attack vector is through Microsoft Excel. Exploitation of this vulnerability requires that a user open a specially crafted Excel file with an affected version of Microsoft Excel.
In an e-mail attack scenario, an attacker could exploit the vulnerability by sending a specially crafted Excel file to the user and by convincing the user to open the file.
In a Web-based attack scenario, an attacker would have to host a Web site that contains an Excel file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to convince them to visit the Web site, typically by getting them to click a link that takes them to the attacker's site, and then convince them to open the specially crafted Excel file.
The attack vector for the vulnerability is through Microsoft Excel. Why is this a Microsoft Office bulletin?
Although the known attack vector for exploitation of the vulnerability is through Microsoft Excel, the vulnerable code exists in a shared component of Microsoft Office. The detection logic used to scan for affected systems is designed to check for the affected shared component of Microsoft Office and to offer the updates to a system regardless of whether or not Microsoft Excel is installed.
What systems are primarily at risk from the vulnerability?
Systems where Microsoft Excel is used are primarily at risk. Servers could be at more risk if administrators allow users to log on to servers and to run programs. However, best practices strongly discourage allowing this.
What does the update do?
The update addresses the vulnerability by correcting the way that Microsoft Office handles graphic objects in specially crafted Office files.
When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.
When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.
Update Information
Detection and Deployment Tools and Guidance
Security Central
Manage the software and security updates you need to deploy to the servers, desktop, and mobile systems in your organization. For more information see the TechNet Update Management Center. The Microsoft TechNet Security Web site provides additional information about security in Microsoft products.
Security updates are available from Microsoft Update and Windows Update. Security updates are also available from the Microsoft Download Center. You can find them most easily by doing a keyword search for "security update."
For customers of Microsoft Office for Mac, Microsoft AutoUpdate for Mac can help keep your Microsoft software up to date. For more information about using Microsoft AutoUpdate for Mac, see Check for software updates automatically.
Finally, security updates can be downloaded from the Microsoft Update Catalog. The Microsoft Update Catalog provides a searchable catalog of content made available through Windows Update and Microsoft Update, including security updates, drivers and service packs. By searching using the security bulletin number (such as, "MS07-036"), you can add all of the applicable updates to your basket (including different languages for an update), and download to the folder of your choosing. For more information about the Microsoft Update Catalog, see the Microsoft Update Catalog FAQ.
Detection and Deployment Guidance
Microsoft provides detection and deployment guidance for security updates. This guidance contains recommendations and information that can help IT professionals understand how to use various tools for detection and deployment of security updates. For more information, see Microsoft Knowledge Base Article 961747.
Microsoft Baseline Security Analyzer
Microsoft Baseline Security Analyzer (MBSA) allows administrators to scan local and remote systems for missing security updates as well as common security misconfigurations. For more information about MBSA, visit Microsoft Baseline Security Analyzer.
The following table provides the MBSA detection summary for this security update.
| Software | MBSA |
|---|---|
| Microsoft Office XP Service Pack 3 | Yes |
| Microsoft Office 2003 Service Pack 3 | Yes |
| Microsoft Office 2007 Service Pack 2 | Yes |
| Microsoft Office 2004 for Mac | No |
| Microsoft Office 2008 for Mac | No |
| Open XML File Format Converter for Mac | No |
Note For customers using legacy software not supported by the latest release of MBSA, Microsoft Update, and Windows Server Update Services, please visit Microsoft Baseline Security Analyzer and reference the Legacy Product Support section on how to create comprehensive security update detection with legacy tools.
Windows Server Update Services
Windows Server Update Services (WSUS) enables information technology administrators to deploy the latest Microsoft product updates to computers that are running the Windows operating system. For more information about how to deploy security updates using Windows Server Update Services, see the TechNet article, Windows Server Update Services.
Systems Management Server
The following table provides the SMS detection and deployment summary for this security update.
| Software | SMS 2.0 | SMS 2003 with SUIT | SMS 2003 with ITMU | Configuration Manager 2007 |
|---|---|---|---|---|
| Microsoft Office XP Service Pack 3 | No | No | Yes | Yes |
| Microsoft Office 2003 Service Pack 3 | No | No | Yes | Yes |
| Microsoft Office 2007 Service Pack 2 | No | No | Yes | Yes |
| Microsoft Office 2004 for Mac | No | No | No | No |
| Microsoft Office 2008 for Mac | No | No | No | No |
| Open XML File Format Converter for Mac | No | No | No | No |
For SMS 2.0 and SMS 2003, the Security Update Inventory Tool (SUIT) can be used by SMS to detect security updates. See also Downloads for Systems Management Server 2.0.
For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, see SMS 2003 Inventory Tool for Microsoft Updates. For more information about SMS scanning tools, see SMS 2003 Software Update Scanning Tools. See also Downloads for Systems Management Server 2003.
System Center Configuration Manager 2007 uses WSUS 3.0 for detection of updates. For more information about Configuration Manager 2007 Software Update Management, visit System Center Configuration Manager 2007.
For more information about SMS, visit the SMS Web site.
For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.
Note If you have used an Administrative Installation Point (AIP) for deploying Office XP or Office 2003, you may not be able to deploy the update using SMS if you have updated the AIP from the original baseline. For more information, see the Office Administrative Installation Point heading in this section.
Office Administrative Installation Point
If you installed your application from a server location, the server administrator must update the server location with the administrative update and deploy that update to your system.
- For supported versions of Microsoft Office XP, see Creating an Administrative Installation Point. For more information on how to change the source for a client system from an updated administrative installation point to an Office XP original baseline source, see Microsoft Knowledge Base Article 922665.
Note If you plan to manage software updates centrally from an updated administrative image, you can find more information in the article Updating Office XP Clients from a Patched Administrative Image. - For supported versions of Microsoft Office 2003, see Creating an Administrative Installation Point. For more information on how to change the source for a client computer from an updated administrative installation point to an Office 2003 original baseline source or Service Pack 3 (SP3), see Microsoft Knowledge Base Article 902349.
Note If you plan to manage software updates centrally from an updated administrative image, you can find more information in the article, Distributing Office 2003 Product Updates. - For creating a network installation point for supported versions of Microsoft Office, see Create a network installation point for Microsoft Office.
Note If you plan to manage security updates centrally, use Windows Server Update Services. For more information about how to deploy security updates for Microsoft Office, visit the Windows Server Update Services Web site.
Update Compatibility Evaluator and Application Compatibility Toolkit
Updates often write to the same files and registry settings required for your applications to run. This can trigger incompatibilities and increase the time it takes to deploy security updates. You can streamline testing and validating Windows updates against installed applications with the Update Compatibility Evaluator components included with Application Compatibility Toolkit.
The Application Compatibility Toolkit (ACT) contains the necessary tools and documentation to evaluate and mitigate application compatibility issues before deploying Microsoft Windows Vista, a Windows Update, a Microsoft Security Update, or a new version of Windows Internet Explorer in your environment.
Security Update Deployment
Affected Software
For information about the specific security update for your affected software, click the appropriate link:
Office XP (all editions)
Reference Table
The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.
| Inclusion in Future Service Packs | There are no more service packs planned for this software. The update for this issue may be included in a future update rollup. |
| Deployment | |
| Installing without user intervention | officexp-KB2509461-FullFile-ENU.exe /q:a |
| Installing without restarting | officexp-KB2509461-FullFile-ENU.exe /r:n |
| Update log file | Not applicable |
| Further information | For detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance. For features you can selectively install, see the Office Features for Administrative Installations subsection in this section. |
| Restart Requirement | |
| Restart required? | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012. |
| HotPatching | Not applicable |
| Removal Information | Use Add or Remove Programs tool in Control Panel. Note When you remove this update, you may be prompted to insert the Microsoft Office XP CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771. |
| File Information | See Microsoft Knowledge Base Article 2509461 |
| Registry Key Verification | Not applicable |
Office Features
The following table contains the list of feature names (case sensitive) that must be reinstalled for the update. To install all features, you can use REINSTALL=ALL or you can install the following features:
| Product | Feature |
|---|---|
| ACCESS, FP, OUTLOOK, PPT, ACCESSRT, PUB | ProductFiles |
| PIPC1, PROPLUS, PRO, SBE, STD, STDEDU | ProductFiles |
| EXCEL | EXCELNonBootFiles, ProductFiles |
Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by Windows Installer.
Deployment Information
Installing the Update
You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.
This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.
To install the 2.0 or later version of Windows Installer, visit one of the following Microsoft Web sites:
- Windows Installer 4.5 Redistributable for Windows Server 2008, Windows Vista, Windows Server 2003, and Windows XP
- Windows Installer 3.1 Redistributable for Windows Server 2003, Windows XP, and Microsoft Windows 2000
- Windows Installer 2.0 Redistributable for Microsoft Windows 2000 and Windows NT 4.0
For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.
This security update supports the following setup switches.
| Switch | Description |
|---|---|
| /q | Specifies quiet mode, or suppresses prompts, when files are being extracted. |
| /q:u | Specifies user-quiet mode, which presents some dialog boxes to the user. |
| /q:a | Specifies administrator-quiet mode, which does not present any dialog boxes to the user. |
| /t:path | Specifies the target folder for extracting files. |
| /c | Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder. |
| /c:path | Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file. |
| /r:n | Never restarts the system after installation. |
| /r:I | Prompts the user to restart the system if a restart is required, except when used with /q:a. |
| /r:a | Always restarts the system after installation. |
| /r:s | Restarts the system after installation without prompting the user. |
| /n:v | No version checking - Install the program over any earlier version. |
Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.
Removing the Update
To remove this security update, use the Add or Remove Programs tool in Control Panel. Note When you remove this update, you may be prompted to insert the Microsoft Office XP CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.
Verifying That the Update Has Been Applied
- Microsoft Baseline Security Analyzer
To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.
- File Version Verification
Because there are several versions and editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.
- Click Start, and then click Search.
- In the Search Results pane, click All files and folders under Search Companion.
- In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
- In the list of files, right-click a file name from the appropriate file information table, and then click Properties.
Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed. - On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.
Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
Office 2003 (all editions)
Reference Table
The following table contains the security update information for this software. You can find additional information in the Deployment Information subsection below.
| Inclusion in Future Service Packs | There are no more service packs planned for this software. The update for this issue may be included in a future update rollup. |
| Deployment | |
| Installing without user intervention | Office2003-kb2509503-fullfile-enu.exe /q:a |
| Installing without restarting | Office2003-kb2509503-fullfile-enu.exe /r:n |
| Update log file | Not applicable |
| Further information | For detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance. For features you can selectively install, see the Office Features for Administrative Installations subsection in this section. |
| Restart Requirement | |
| Restart required? | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012. |
| HotPatching | Not applicable |
| Removal Information | Use Add or Remove Programs tool in Control Panel. Note When you remove this update, you may be prompted to insert the Microsoft Office 2003 CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771. |
| File Information | See Microsoft Knowledge Base Article 2509503 |
| Registry Key Verification | Not applicable |
Office Features
The following table contains the list of feature names (case sensitive) that must be reinstalled for the update. To install all features, you can use REINSTALL=ALL or you can install the following features:
| Product | Feature |
|---|---|
| VISVEA, PPT11, RMS, STD11, ACCESSRT, ACC11, BASIC11, FP11, ONOTE11, OUTLS11, OUTL11, OUTLSM11, PERS11, PRO11SB, PROI11, PRO11, PUB11, STDP11, WORD11, INF11, EXCEL11, PRJPROE, PRJPRO, PRJSTDE, PRJSTD, VISPRO, VISPROR, VISSTD, VISSTDR | ProductNonBootFiles |
Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by Windows Installer.
Deployment Information
Installing the Update
You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.
This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.
To install the 2.0 or later version of Windows Installer, visit one of the following Microsoft Web sites:
- Windows Installer 4.5 Redistributable for Windows Server 2008, Windows Vista, Windows Server 2003, and Windows XP
- Windows Installer 3.1 Redistributable for Windows Server 2003, Windows XP, and Microsoft Windows 2000
- Windows Installer 2.0 Redistributable for Microsoft Windows 2000 and Windows NT 4.0
For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.
This security update supports the following setup switches.
| Switch | Description |
|---|---|
| /q | Specifies quiet mode, or suppresses prompts, when files are being extracted. |
| /q:u | Specifies user-quiet mode, which presents some dialog boxes to the user. |
| /q:a | Specifies administrator-quiet mode, which does not present any dialog boxes to the user. |
| /t:path | Specifies the target folder for extracting files. |
| /c | Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder. |
| /c:path | Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file. |
| /r:n | Never restarts the system after installation. |
| /r:I | Prompts the user to restart the system if a restart is required, except when used with /q:a. |
| /r:a | Always restarts the system after installation. |
| /r:s | Restarts the system after installation without prompting the user. |
| /n:v | No version checking - Install the program over any earlier version. |
Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.
Removing the Update
To remove this security update, use the Add or Remove Programs tool in Control Panel.
Note When you remove this update, you may be prompted to insert the Microsoft Office 2003 CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.
Verifying that the Update Has Been Applied
- Microsoft Baseline Security Analyzer
To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.
- File Version Verification
Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.
- Click Start and then enter an update file name in the Start Search box.
- When the file appears under Programs, right-click the file name and click Properties.
- On the General tab, compare the file size with the file information tables provided in the bulletin KB article.
- You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
- Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.
Microsoft Office 2007 (all editions)
Reference Table
The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.
| Inclusion in Future Service Packs | The update for this issue will be included in a future service pack or update rollup |
| Deployment | |
| Installing without user intervention | Office2007-kb2509488-fullfile-x86-glb.exe /passive |
| Installing without restarting | Office2007-kb2509488-fullfile-x86-glb.exe /norestart |
| Update log file | Not applicable |
| Further information | For detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance. |
| Restart Requirement | |
| Restart required? | In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012. |
| HotPatching | Not applicable |
| Removal Information | Use Add or Remove Programs tool in Control Panel. |
| File Information | See Microsoft Knowledge Base Article 2509488 |
| Registry Key Verification | Not applicable |
Deployment Information
Installing the Update
You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.
This security update requires that Windows Installer 3.1 or later be installed on the system.
To install the 3.1 or later version of Windows Installer, visit one of the following Microsoft Web sites:
- Windows Installer 4.5 Redistributable for Windows Server 2008, Windows Vista, Windows Server 2003, and Windows XP
- Windows Installer 3.1 Redistributable for Windows Server 2003, Windows XP, and Microsoft Windows 2000
For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.
This security update supports the following setup switches.
| Switch | Description |
|---|---|
| /? or /help | Displays usage dialog. |
| /passive | Specifies passive mode. Requires no user interaction; users see basic progress dialogs but cannot cancel. |
| /quiet | Specifies quiet mode, or suppresses prompts, when files are being extracted. |
| /norestart | Suppresses restarting the system if the update requires a restart. |
| /forcerestart | Automatically restarts the system after applying the update, regardless of whether the update requires the restart. |
| /extract | Extracts the files without installing them. You are prompted for a target folder. |
| /extract:<path> | Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file. |
| /lang:<LCID> | Forces the use of a specific language, when the update package supports that language. |
| /log:<log file> | Enables logging, by both Vnox and Installer, during the update installation. |
Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.
Removing the Update
To remove this security update, use the Add or Remove Programs tool in Control Panel.
Note When you remove this update, you may be prompted to insert the 2007 Microsoft Office CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.
Verifying that the Update Has Been Applied
- Microsoft Baseline Security Analyzer
To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.
- File Version Verification
Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.
- Click Start and then enter an update file name in the Start Search box.
- When the file appears under Programs, right-click the file name and click Properties.
- On the General tab, compare the file size with the file information tables provided in the bulletin KB article.
- You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
- Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.
Office 2004 for Mac
Deployment Information
Prerequisites
- Mac OS X version 10.2.8 or later on a G3, Mac OS X-compatible processor or higher
- Mac OS X user accounts must have administrator privileges to install this security update
Installing the Update
Download and install the appropriate language version of the Microsoft Office 2004 for Mac 11.6.3 Update from the Microsoft Download Center.
- Quit any applications that are running, including virus-protection applications, all Microsoft Office applications, Microsoft Messenger for Mac, and Office Notifications, because they might interfere with installation.
- Open the Microsoft Office 2004 for Mac 11.6.3 Update volume on your desktop. This step might have been performed for you.
- To start the update process, in the Microsoft Office 2004 for Mac 11.6.3 Update volume window, double-click the Microsoft Office 2004 for Mac 11.6.3 Update application, and follow the instructions on the screen.
- If the installation finishes successfully, you can remove the update installer from your hard disk. To verify that the installation finished successfully, see the following "Verifying Update Installation" heading. To remove the update installer, first drag the Microsoft Office 2004 for Mac 11.6.3 Update volume to the Trash, and then drag the file that you downloaded to the Trash.
Verifying Update Installation
To verify that a security update is installed on an affected system, follow these steps:
- In the Finder, navigate to the Application Folder (Microsoft Office 2004: Office).
- Select the file, Microsoft Component Plugin.
- On the File menu, click Get Info or Show Info.
If the Version number is 11.6.3, the update has been successfully installed.
Restart Requirement
This update does not require you to restart your computer.
Removing the Update
This security update cannot be uninstalled.
Additional Information
If you have technical questions or problems downloading or using this update, visit Microsoft for Mac Support to learn about the support options that are available to you.
Office 2008 for Mac
Deployment Information
Prerequisites
- Mac OS X version 10.4.9 or later on an Intel, PowerPC G5, or PowerPC G4 (500 MHz or faster) processor
- Mac OS X user accounts must have administrator privileges to install this security update
Installing the Update
Download and install the appropriate language version of the Microsoft Office 2008 for Mac 12.2.9 Update from the Microsoft Download Center.
- Quit any applications that are running, including virus-protection applications, all Microsoft Office applications, Microsoft Messenger for Mac, and Office Notifications, because they might interfere with installation.
- Open the Microsoft Office 2008 for Mac 12.2.9 Update volume on your desktop. This step might have been performed for you.
- To start the update process, in the Microsoft Office 2008 for Mac 12.2.9 Update volume window, double-click the Microsoft Office 2008 for Mac 12.2.9 Update application, and follow the instructions on the screen.
- If the installation finishes successfully, you can remove the update installer from your hard disk. To verify that the installation finished successfully, see the following "Verifying Update Installation" heading. To remove the update installer, first drag the Microsoft Office 2008 for Mac 12.2.9 Update volume to the Trash, and then drag the file that you downloaded to the Trash.
Verifying Update Installation
To verify that a security update is installed on an affected system, follow these steps:
- In the Finder, navigate to the Application Folder (Microsoft Office 2008: Office).
- Select the file, Microsoft Component Plugin.
- On the File menu, click Get Info or Show Info.
If the Version number is 12.2.9, the update has been successfully installed.
Restart Requirement
This update does not require you to restart your computer.
Removing the Update
This security update cannot be uninstalled.
Additional Information
If you have technical questions or problems downloading or using this update, visit Microsoft for Mac Support to learn about the support options that are available to you.
Open XML File Format Converter for Mac
Deployment Information
Prerequisites
- Mac OS X version 10.4.9 or later on an Intel, PowerPC G5, or PowerPC G4 (500 MHz or faster) processor
- Mac OS X user accounts must have administrator privileges to install this security update
Installing the Update
Download and install the appropriate language version of the Open XML File Format Converter for Mac 1.1.9 Update from the Microsoft Download Center.
- Quit any applications that are running, including virus-protection applications, all Microsoft Office applications, Microsoft Messenger for Mac, and Office Notifications, because they might interfere with installation.
- Open the Open XML File Format Converter for Mac 1.1.9 Update volume on your desktop. This step might have been performed for you.
- To start the update process, in the Open XML File Format Converter for Mac 1.1.9 Update volume window, double-click the Open XML File Format Converter for Mac 1.1.9 Update application, and follow the instructions on the screen.
- If the installation finishes successfully, you can remove the update installer from your hard disk. To verify that the installation finished successfully, see the following "Verifying Update Installation" heading. To remove the update installer, first drag the Open XML File Format Converter for Mac 1.1.9 Update volume to the Trash, and then drag the file that you downloaded to the Trash.
Verifying Update Installation
To verify that a security update is installed on an affected system, follow these steps:
- In the Finder, navigate to the Application Folder.
- Select the file, Open XML File Format Converter.
- On the File menu, click Get Info or Show Info.
If the Version number is 1.1.9, the update has been successfully installed.
Restart Requirement
This update does not require you to restart your computer.
Removing the Update
This security update cannot be uninstalled.
Additional Information
If you have technical questions or problems downloading or using this update, visit Microsoft for Mac Support to learn about the support options that are available to you.
Other Information
Acknowledgments
Microsoft thanks the following for working with us to help protect customers:
- Haifei Li of Fortinet’s FortiGuard Labs for reporting the Office Component Insecure Library Loading Vulnerability (CVE-2011-0107)
- An anonymous researcher, working with TippingPoint's Zero Day Initiative, for reporting the Microsoft Office Graphic Object Dereferencing Vulnerability (CVE-2011-0977)
Microsoft Active Protections Program (MAPP)
To improve security protections for customers, Microsoft provides vulnerability information to major security software providers in advance of each monthly security update release. Security software providers can then use this vulnerability information to provide updated protections to customers via their security software or devices, such as antivirus, network-based intrusion detection systems, or host-based intrusion prevention systems. To determine whether active protections are available from security software providers, please visit the active protections Web sites provided by program partners, listed in Microsoft Active Protections Program (MAPP) Partners.
Support
- Customers in the U.S. and Canada can receive technical support from Security Support or 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates. For more information about available support options, see Microsoft Help and Support.
- International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.
Disclaimer
The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.
Revisions
- V1.0 (April 12, 2011): Bulletin published.