Share via


Move the Directory Database and Log Files to a Local Drive

Applies To: Windows Server 2008, Windows Server 2008 R2

You can use this procedure to move Active Directory database and log files to a local drive.

When you move the files to a folder on the local domain controller, you can move them permanently or temporarily. Move the files to a temporary destination if you need to reformat the original location, or move the files to a permanent location if you have additional disk space. If you reformat the original drive, use the same procedure to move the files back after the reformat is complete. Ntdsutil.exe updates the registry when you move files locally. Even if you are moving the files only temporarily, use Ntdsutil.exe so that the registry is always current.

If you do not have space on the local domain controller to move the files temporarily, you can copy files to a remote share. For information about copying files to a remote share, see Copy the Directory Database and Log Files to a Remote Share.

On a domain controller that is running Windows Server 2008, you do not have to restart the domain controller in Directory Services Restore Mode (DSRM) to move database files. You can stop the Active Directory Domain Services (AD DS) service and then restart the service after you move the files to their permanent location. For information about restartable AD DS, see the Windows Server 2008 Restartable AD DS Step-by-Step Guide (https://go.microsoft.com/fwlink/?LinkId=88649).

Membership in Builtin Administrators, or equivalent, is the minimum required to complete this procedure. Review details about using the appropriate accounts and group memberships at Local and Domain Default Groups (https://go.microsoft.com/fwlink/?LinkId=83477).

To move the directory database and log files to a local drive

  1. Open a Command Prompt as an administrator: On the Start menu, right-click Command Prompt, and then click Run as administrator. If the User Account Control dialog box appears, provide credentials, if required, and then click Continue.

  2. At the command prompt, type the following command, and then press ENTER:

    net stop ntds

    Type Y to agree to stop additional services, and then press ENTER.

  3. At the command prompt, change directories to the current location of the directory database file (Ntds.dit) or the log files, whichever you are moving.

  4. Run the dir command, and make a note of the current size and location of the Ntds.dit file.

  5. At the command prompt, type ntdsutil, and then press ENTER.

  6. At the ntdsutil prompt, type activate instance ntds, and then press ENTER.

  7. At the ntdsutil prompt, type files, and then press ENTER.

  8. To move the database file, at the file maintenance: prompt, use the following commands:

    • To move the Ntds.dit file, type the following command, and then press ENTER:

      move db to``<drive>:\<directory>

    • To move the log files, type the following command, and then press ENTER:

      move logs to``<drive>:\<directory>

    where <drive>:\<directory> specifies the path to the new location. If the directory does not exist, Ntdsutil.exe creates it.

Note

If the directory path contains any spaces, the entire path must be surrounded by quotation marks, for example, move db to"g:\new folder".

  1. After the move completes, at the file maintenance: prompt, type quit, and then press ENTER. Type quit again, and then press ENTER to quit Ntdsutil.exe.

  2. Change to the destination directory, and then run the dir command to confirm the presence of the files. If you have moved the database file, check the size of the Ntds.dit file against the file size that you noted in step 4 to be sure that you are focused on the correct file.

  3. If you are moving the database file or log files permanently, go to step 12.

    If you are moving the database file or log files temporarily, you can now perform any required updates to the original drive. After you update the drive, repeat steps 3 through 9 to move the files back to the original location.

    If the path to the database file or log files has not changed, go to step 13.

  4. If the path to the database file or log files has changed from the original location, check permissions on the database folder or logs folder, as follows:

    1. In Windows Explorer, right-click the folder to which you have moved the database file or log files, and then click Properties.

    2. Click the Security tab, and then click Advanced. Verify that the permissions are as follows:

      Administrators group has Allow Full Control.

      SYSTEM has Allow Full Control.

      The Include inheritable permissions from this object’s parent check box is cleared.

      No Deny permissions are selected.

    3. If the permissions in step 12b are in effect, go to step 13. If permissions other than the permissions described in step 12b are in effect, perform steps 12d through 12k.

    4. If Include inheritable permissions from this object’s parent is selected, click Edit, click to clear the setting, and then click OK.

      When you are prompted, click Copy to copy previously inherited permissions to this object.

    5. If Administrators or SYSTEM, or both, are not in the Name list, click OK, click Edit, and then click Add.

    6. In From this location, be sure that the name of the domain is selected.

    7. In Enter the object names to select, type System, if necessary, and then click OK. Repeat to add Administrators, if necessary, and then click OK.

    8. On the Security tab, click System, and then, in the Allow column, click Full Control. Repeat for Administrators.

    9. In the Group or user names box, click any name that is not SYSTEM (SID: S-1-5-18) or Administrators (SID: S-1-5-32-544), and then click Remove. Repeat until the only remaining accounts are Administrators and SYSTEM, and then click OK.

Note

Some accounts might appear in the form of security identifiers (SIDs). For more information, see article 243330 in the Microsoft Knowledge Base (https://go.microsoft.com/fwlink/?LinkId=182319).

10. Click **OK** to close **Properties**.  
      
  1. At the command prompt, type ntdsutil, and then press ENTER.

  2. At the ntdsutil prompt, type activate instance ntds, and then press ENTER.

  3. At the ntdsutil prompt, type files, and then press ENTER.

  4. At the file maintenance: prompt, type integrity, and then press ENTER.

    If you receive an error “JET_errOutOfSessions -1101” when you attempt to perform the integrity check, see article 2121690 (https://go.microsoft.com/fwlink/?LinkId=205688) in the Microsoft Knowledge Base. If the integrity check fails, see If the Database Integrity Check Fails, Perform Semantic Database Analysis with Fixup.

  5. If the integrity check succeeds, type quit, and then press ENTER to quit the file maintenance prompt. Type quit again, and then press ENTER to quit Ntdsutil.exe.

  6. At the command prompt, type the following command, and then press ENTER:

    net start ntds

  7. Open Event Viewer, and check the Directory Service log for errors.

  8. If the following events are logged in the Directory Service log in Event Viewer when you restart AD DS, stop AD DS, and then resolve the event issues as follows:

    • Event ID 1046. “The Active Directory database engine caused an exception with the following parameters.” In this case, AD DS cannot recover from this error and you must restore AD DS from backup.

    • Event ID 1168. “Internal error: An Active Directory error has occurred.” In this case, information is missing from the registry and you must restore AD DS from backup.

See Also

Concepts

If the Database Integrity Check Fails, Perform Semantic Database Analysis with Fixup
Copy the Directory Database and Log Files to a Remote Share
Recovering Active Directory Domain Services