Remove-NlbClusterNodeDip
Remove-NlbClusterNodeDip
Removes a dedicate IP address from a Network Load Balancing (NLB) cluster.
Syntaxe
Parameter Set: NonPipeline
Remove-NlbClusterNodeDip [-IP] <IPAddress> [-Force] [-HostName <String> ] [-InterfaceName <String> ] [-PassThru] [ <CommonParameters>]
Parameter Set: Pipeline
Remove-NlbClusterNodeDip -InputObject <ClusterNodeDip[]> [-Force] [-PassThru] [ <CommonParameters>]
Description détaillée
The Remove-NlbClusterNodeDIP cmdlet removes a dedicate IP address from a Network Load Balancing (NLB) cluster. Once a dedicated IP address is removed, the node will not be accessible through this IP address.
This cmdlet changes the configuration on all cluster nodes. As a result, the NLB cluster will have to restart the convergence process on all nodes to guarantee that configuration changes have been applied on all nodes and that a consistent state is reached. Any additional operations on the NLB cluster should not be initiated until all cluster nodes have completed the convergence process and are back to the converged state.
Paramètres
-Force
Runs the cmdlet without prompting for confirmation. By default the cmdlet will ask for confirmation from the user before proceeding.
Alias |
F |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-HostName<String>
Specifies the name of the cluster host against which this cmdlet is run. If this parameter is omitted or a value of . is entered, then the local cluster is assumed.
Alias |
Host,HN,H |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-IP<IPAddress>
Specifies the IP address for the cluster node from which the dedicated IP address will be removed.
Alias |
none |
Obligatoire ? |
true |
Position ? |
1 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-InputObject<ClusterNodeDip[]>
Specifies the cluster node dedicated IP address to remove.
Alias |
none |
Obligatoire ? |
true |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByValue, ByPropertyName) |
Accepter les caractères génériques ? |
false |
-InterfaceName<String>
Specifies the interface to which NLB is bound. This is the interface of the cluster against which this cmdlet is run.
Alias |
Interface,IN,I |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-PassThru
Sends items from the interactive window down the pipeline as input to other cmdlets. By default, this cmdlet does not generate any output.
To send items from the interactive window down the pipeline, click to select the items and then click OK. Shift-click and Ctrl-click are supported.
Alias |
Pass |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
<CommonParameters>
Cette applet de commande prend en charge les paramètres courants : -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer et -OutVariable. Pour plus d’informations, consultez about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Entrées
Le type d’entrée correspond au type des objets que vous pouvez transmettre à l’applet de commande.
- Microsoft.NetworkLoadBalancingClusters.PowerShell.ClusterNodeDip
Sorties
Le type de sortie est le type des objets émis par l’applet de commande.
- Microsoft.NetworkLoadBalancingClusters.PowerShell.ClusterNodeDip
Exemples
EXAMPLE 1
This example removes the dedicated IP address from the local cluster after seeking confirmation from the user.
PS C:\> Remove-NlbClusterNodeDip –IP fe80::9bf9:2019:372a:ca5
EXAMPLE 2
This example removes the dedicated IP address from the local cluster without seeking confirmation from the user.
PS C:\> Remove-NlbClusterNodeDip –IP fe80::9bf9:2019:372a:ca5 -Force
EXAMPLE 3
This example removes the dedicated IP address from the remote host.
PS C:\> Remove-NlbClusterNodeDip –IP fe80::8cb4:defa:65b2:8983 -HostName node2