Partager via


UITypeEditor Classe

Définition

Fournit une classe de base pouvant être utilisée pour concevoir des éditeurs de valeurs dont l'interface utilisateur permet de représenter et de modifier les valeurs d'objets des types de données pris en charge.

public ref class UITypeEditor
public class UITypeEditor
type UITypeEditor = class
Public Class UITypeEditor
Héritage
UITypeEditor
Dérivé

Exemples

L’exemple de code suivant montre qu’un peut être associé à une UITypeEditor propriété integer, double ou float à l’aide d’un EditorAttribute pour fournir une interface de sélection d’angle à partir de la fenêtre Propriétés en mode création. Cet exemple utilise l’interface IWindowsFormsEditorService pour afficher un contrôle déroulant dans la fenêtre Propriétés en mode création. Compilez le code et ajoutez l’assembly à la boîte à outils à l’aide de la commande Personnaliser la boîte à outils du menu Outils de Visual Studio. Créez une instance du et cliquez sur le bouton déroulant en regard de la propriété Angle dans la fenêtre Propriétés pour configurer la propriété à l’aide de AngleTestControl l’éditeur.

#using <System.Windows.Forms.dll>
#using <System.Drawing.dll>
#using <System.dll>

using namespace System;
using namespace System::ComponentModel;
using namespace System::Drawing;
using namespace System::Drawing::Design;
using namespace System::Windows::Forms;
using namespace System::Windows::Forms::Design;

namespace AngleEditor
{
   // Provides a user interface for adjusting an angle value.
   ref class AngleControl: public System::Windows::Forms::UserControl
   {
   public:

      // Stores the angle.
      double angle;

   private:

      // Stores the rotation offset.
      int rotation;

      // Control state tracking variables.
      int dbx;
      int dby;
      int overButton;

   public:
      AngleControl( double initial_angle )
      {
         this->angle = initial_angle;
         this->SetStyle( static_cast<ControlStyles>(ControlStyles::AllPaintingInWmPaint), true );
         rotation = 0;
         dbx = -10;
         dby = -10;
         overButton = -1;
      }

   protected:
      virtual void OnPaint( System::Windows::Forms::PaintEventArgs^ e ) override
      {
         // Set angle origin point at center of control.
         int originX = (this->Width / 2);
         int originY = (this->Height / 2);

         // Fill background and ellipse and center point.
         e->Graphics->FillRectangle( gcnew SolidBrush( Color::DarkBlue ), 0, 0, this->Width, this->Height );
         e->Graphics->FillEllipse( gcnew SolidBrush( Color::White ), 1, 1, this->Width - 3, this->Height - 3 );
         e->Graphics->FillEllipse( gcnew SolidBrush( Color::SlateGray ), originX - 1, originY - 1, 3, 3 );

         // Draw angle markers.
         int startangle = (270 - rotation) % 360;
         e->Graphics->DrawString( startangle.ToString(), gcnew System::Drawing::Font( "Arial",8.0 ), gcnew SolidBrush( Color::DarkGray ), (float)(this->Width / 2) - 10, (float)10 );
         startangle = (startangle + 90) % 360;
         e->Graphics->DrawString( startangle.ToString(), gcnew System::Drawing::Font( "Arial",8 ), gcnew SolidBrush( Color::DarkGray ), (float)this->Width - 18, (float)(this->Height / 2) - 6 );
         startangle = (startangle + 90) % 360;
         e->Graphics->DrawString( startangle.ToString(), gcnew System::Drawing::Font( "Arial",8 ), gcnew SolidBrush( Color::DarkGray ), ((float)this->Width / 2) - 6, (float)this->Height - 18 );
         startangle = (startangle + 90) % 360;
         e->Graphics->DrawString( startangle.ToString(), gcnew System::Drawing::Font( "Arial",8 ), gcnew SolidBrush( Color::DarkGray ), (float)10, (float)(this->Height / 2) - 6 );

         // Draw line along the current angle.
         double radians = ((((int)(angle + rotation) + 360) % 360) * Math::PI) / (double)180;
         e->Graphics->DrawLine( gcnew Pen( gcnew SolidBrush( Color::Red ),1 ), originX, originY, originX + (int)((double)originX * (double)Math::Cos( radians )), originY + (int)((double)originY * (double)Math::Sin( radians )) );

         // Output angle information.
         e->Graphics->FillRectangle( gcnew SolidBrush( Color::Gray ), this->Width - 84, 3, 82, 13 );
         e->Graphics->DrawString( String::Format( "Angle: {0}", angle.ToString( "F4" ) ), gcnew System::Drawing::Font( "Arial",8 ), gcnew SolidBrush( Color::Yellow ), (float)this->Width - 84, (float)2 );

         // Draw square at mouse position of last angle adjustment.
         e->Graphics->DrawRectangle( gcnew Pen( gcnew SolidBrush( Color::Black ),1 ), dbx - 2, dby - 2, 4, 4 );

         // Draw rotation adjustment buttons.
         if ( overButton == 1 )
         {
            e->Graphics->FillRectangle( gcnew SolidBrush( Color::Green ), this->Width - 28, this->Height - 14, 12, 12 );
            e->Graphics->FillRectangle( gcnew SolidBrush( Color::Gray ), 2, this->Height - 13, 110, 12 );
            e->Graphics->DrawString( "Rotate 90 degrees left", gcnew System::Drawing::Font( "Arial",8 ), gcnew SolidBrush( Color::White ), (float)2, (float)this->Height - 14 );
         }
         else
                  e->Graphics->FillRectangle( gcnew SolidBrush( Color::DarkGreen ), this->Width - 28, this->Height - 14, 12, 12 );

         if ( overButton == 2 )
         {
            e->Graphics->FillRectangle( gcnew SolidBrush( Color::Green ), this->Width - 14, this->Height - 14, 12, 12 );
            e->Graphics->FillRectangle( gcnew SolidBrush( Color::Gray ), 2, this->Height - 13, 116, 12 );
            e->Graphics->DrawString( "Rotate 90 degrees right", gcnew System::Drawing::Font( "Arial",8 ), gcnew SolidBrush( Color::White ), (float)2, (float)this->Height - 14 );
         }
         else
                  e->Graphics->FillRectangle( gcnew SolidBrush( Color::DarkGreen ), this->Width - 14, this->Height - 14, 12, 12 );

         e->Graphics->DrawEllipse( gcnew Pen( gcnew SolidBrush( Color::White ),1 ), this->Width - 11, this->Height - 11, 6, 6 );
         e->Graphics->DrawEllipse( gcnew Pen( gcnew SolidBrush( Color::White ),1 ), this->Width - 25, this->Height - 11, 6, 6 );
         if ( overButton == 1 )
                  e->Graphics->FillRectangle( gcnew SolidBrush( Color::Green ), this->Width - 25, this->Height - 6, 4, 4 );
         else
                  e->Graphics->FillRectangle( gcnew SolidBrush( Color::DarkGreen ), this->Width - 25, this->Height - 6, 4, 4 );

         if ( overButton == 2 )
                  e->Graphics->FillRectangle( gcnew SolidBrush( Color::Green ), this->Width - 8, this->Height - 6, 4, 4 );
         else
                  e->Graphics->FillRectangle( gcnew SolidBrush( Color::DarkGreen ), this->Width - 8, this->Height - 6, 4, 4 );

         array<Point>^ temp0 = {Point(this->Width - 7,this->Height - 8),Point(this->Width - 3,this->Height - 8),Point(this->Width - 5,this->Height - 4)};
         e->Graphics->FillPolygon( gcnew SolidBrush( Color::White ), temp0 );
         array<Point>^ temp1 = {Point(this->Width - 26,this->Height - 8),Point(this->Width - 21,this->Height - 8),Point(this->Width - 25,this->Height - 4)};
         e->Graphics->FillPolygon( gcnew SolidBrush( Color::White ), temp1 );
      }

      virtual void OnMouseDown( System::Windows::Forms::MouseEventArgs^ e ) override
      {
         // Handle rotation adjustment button clicks.
         if ( e->X >= this->Width - 28 && e->X <= this->Width - 2 && e->Y >= this->Height - 14 && e->Y <= this->Height - 2 )
         {
            if ( e->X <= this->Width - 16 )
                        rotation -= 90;
            else
            if ( e->X >= this->Width - 14 )
                        rotation += 90;

            if ( rotation < 0 )
                        rotation += 360;

            rotation = rotation % 360;
            dbx = -10;
            dby = -10;
         }
         else
                  UpdateAngle( e->X, e->Y );

         this->Refresh();
      }

      virtual void OnMouseMove( System::Windows::Forms::MouseEventArgs^ e ) override
      {
         if ( e->Button == ::MouseButtons::Left )
         {
            UpdateAngle( e->X, e->Y );
            overButton = -1;
         }
         else
         if ( e->X >= this->Width - 28 && e->X <= this->Width - 16 && e->Y >= this->Height - 14 && e->Y <= this->Height - 2 )
                  overButton = 1;
         else
         if ( e->X >= this->Width - 14 && e->X <= this->Width - 2 && e->Y >= this->Height - 14 && e->Y <= this->Height - 2 )
                  overButton = 2;
         else
                  overButton = -1;

         this->Refresh();
      }

   private:
      void UpdateAngle( int mx, int my )
      {
         // Store mouse coordinates.
         dbx = mx;
         dby = my;
         
         // Translate y coordinate input to GetAngle function to correct for ellipsoid distortion.
         double widthToHeightRatio = (double)this->Width / (double)this->Height;
         int tmy;
         if ( my == 0 )
                  tmy = my;
         else
         if ( my < this->Height / 2 )
                  tmy = (this->Height / 2) - (int)(((this->Height / 2) - my) * widthToHeightRatio);
         else
                  tmy = (this->Height / 2) + (int)((double)(my - (this->Height / 2)) * widthToHeightRatio);

         // Retrieve updated angle based on rise over run.
         angle = (int)(GetAngle( this->Width / 2, this->Height / 2, mx, tmy ) - rotation) % 360;
      }

      double GetAngle( int x1, int y1, int x2, int y2 )
      {
         double degrees;

         // Avoid divide by zero run values.
         if ( x2 - x1 == 0 )
         {
            if ( y2 > y1 )
                        degrees = 90;
            else
                        degrees = 270;
         }
         else
         {
            // Calculate angle from offset.
            double riseoverrun = (double)(y2 - y1) / (double)(x2 - x1);
            double radians = Math::Atan( riseoverrun );
            degrees = radians * ((double)180 / Math::PI);
            
            // Handle quadrant specific transformations.
            if ( (x2 - x1) < 0 || (y2 - y1) < 0 )
                        degrees += 180;

            if ( (x2 - x1) > 0 && (y2 - y1) < 0 )
                        degrees -= 180;

            if ( degrees < 0 )
                        degrees += 360;
         }

         return degrees;
      }
   };

   // This UITypeEditor can be associated with Int32, Double and Single
   // properties to provide a design-mode angle selection interface.
   [System::Security::Permissions::PermissionSetAttribute
   (System::Security::Permissions::SecurityAction::InheritanceDemand, Name="FullTrust")]
   [System::Security::Permissions::PermissionSetAttribute
   (System::Security::Permissions::SecurityAction::LinkDemand, Name="FullTrust")]
   public ref class AngleEditor: public System::Drawing::Design::UITypeEditor
   {
   public:
      AngleEditor(){}

      // Indicates whether the UITypeEditor provides a form-based (modal) dialog,
      // drop down dialog, or no UI outside of the properties window.
      virtual System::Drawing::Design::UITypeEditorEditStyle GetEditStyle( System::ComponentModel::ITypeDescriptorContext^ context ) override
      {
         return UITypeEditorEditStyle::DropDown;
      }

      // Displays the UI for value selection.
      virtual Object^ EditValue( System::ComponentModel::ITypeDescriptorContext^ context, System::IServiceProvider^ provider, Object^ value ) override
      {
         // Return the value if the value is not of type Int32, Double and Single.
         if ( value->GetType() != double::typeid && value->GetType() != float::typeid && value->GetType() != int::typeid )
                  return value;
         
         // Uses the IWindowsFormsEditorService* to display a
         // drop-down UI in the Properties window.
         IWindowsFormsEditorService^ edSvc = dynamic_cast<IWindowsFormsEditorService^>(provider->GetService( IWindowsFormsEditorService::typeid ));
         if ( edSvc != nullptr )
         {
            // Display an angle selection control and retrieve the value.
            AngleControl^ angleControl = gcnew AngleControl(  *dynamic_cast<double^>(value) );
            edSvc->DropDownControl( angleControl );

            // Return the value in the appropraite data format.
            if ( value->GetType() == double::typeid )
                        return angleControl->angle;
            else
            if ( value->GetType() == float::typeid )
                        return (float)angleControl->angle;
            else
            if ( value->GetType() == int::typeid )
                        return (int)angleControl->angle;
         }

         return value;
      }

      // Draws a representation of the property's value.
   private:
      void PaintValue( System::Drawing::Design::PaintValueEventArgs^ e ) new
      {
         int normalX = (e->Bounds.Width / 2);
         int normalY = (e->Bounds.Height / 2);
         
         // Fill background and ellipse and center point.
         e->Graphics->FillRectangle( gcnew SolidBrush( Color::DarkBlue ), e->Bounds.X, e->Bounds.Y, e->Bounds.Width, e->Bounds.Height );
         e->Graphics->FillEllipse( gcnew SolidBrush( Color::White ), e->Bounds.X + 1, e->Bounds.Y + 1, e->Bounds.Width - 3, e->Bounds.Height - 3 );
         e->Graphics->FillEllipse( gcnew SolidBrush( Color::SlateGray ), normalX + e->Bounds.X - 1, normalY + e->Bounds.Y - 1, 3, 3 );
         
         // Draw line along the current angle.
         double radians = ( *dynamic_cast<double^>(e->Value) * Math::PI) / (double)180;
         e->Graphics->DrawLine( gcnew Pen( gcnew SolidBrush( Color::Red ),1 ), normalX + e->Bounds.X, normalY + e->Bounds.Y, e->Bounds.X + (normalX + (int)((double)normalX * Math::Cos( radians ))), e->Bounds.Y + (normalY + (int)((double)normalY * Math::Sin( radians ))) );
      }

      // Indicates whether the UITypeEditor supports painting a
      // representation of a property's value.
      bool GetPaintValueSupported( System::ComponentModel::ITypeDescriptorContext^ context ) new
      {
         return true;
      }
   };

   public ref class AngleEditorTestControl: public System::Windows::Forms::UserControl
   {
   private:
      double int_angle;

   public:

      property double Angle 
      {
         [BrowsableAttribute(true)]
         [EditorAttribute(AngleEditor::typeid,System::Drawing::Design::UITypeEditor::typeid)]
         double get()
         {
            return int_angle;
         }

         void set( double value )
         {
            int_angle = value;
         }

      }
      AngleEditorTestControl()
      {
         int_angle = 90;
         this->Size = System::Drawing::Size( 190, 42 );
         this->BackColor = Color::Beige;
      }

   protected:
      virtual void OnPaint( System::Windows::Forms::PaintEventArgs^ e ) override
      {
         if ( this->DesignMode )
         {
            e->Graphics->DrawString( "Use the Properties Window to access", 
               gcnew System::Drawing::Font( "Arial",8 ), gcnew SolidBrush( Color::Black ), 3, 2 );
            e->Graphics->DrawString( "the AngleEditor UITypeEditor by", 
               gcnew System::Drawing::Font( "Arial",8 ), gcnew SolidBrush( Color::Black ), 3, 14 );
            e->Graphics->DrawString( "configuring the \"Angle\" property.", 
               gcnew System::Drawing::Font( "Arial",8 ), gcnew SolidBrush( Color::Black ), 3, 26 );
         }
         else
            e->Graphics->DrawString( "This example requires design mode.", 
               gcnew System::Drawing::Font( "Arial",8 ), gcnew SolidBrush( Color::Black ), 3, 2 );
      }
   };
}
using System;
using System.ComponentModel;
using System.Drawing;
using System.Drawing.Design;
using System.Windows.Forms;
using System.Windows.Forms.Design;

namespace AngleEditor
{
    // This UITypeEditor can be associated with Int32, Double and Single
    // properties to provide a design-mode angle selection interface.
    public class AngleEditor : System.Drawing.Design.UITypeEditor
    {
        public AngleEditor()
        {
        }

        // Indicates whether the UITypeEditor provides a form-based (modal) dialog,
        // drop down dialog, or no UI outside of the properties window.
        public override System.Drawing.Design.UITypeEditorEditStyle GetEditStyle(System.ComponentModel.ITypeDescriptorContext context)
        {
            return UITypeEditorEditStyle.DropDown;
        }

        // Displays the UI for value selection.
        public override object EditValue(System.ComponentModel.ITypeDescriptorContext context, System.IServiceProvider provider, object value)
        {
            // Return the value if the value is not of type Int32, Double and Single.
            if( value.GetType() != typeof(double) && value.GetType() != typeof(float) && value.GetType() != typeof(int) )
                return value;

            // Uses the IWindowsFormsEditorService to display a
            // drop-down UI in the Properties window.
            IWindowsFormsEditorService edSvc = (IWindowsFormsEditorService)provider.GetService(typeof(IWindowsFormsEditorService));
            if( edSvc != null )
            {
                // Display an angle selection control and retrieve the value.
                AngleControl angleControl = new AngleControl((double)value);
                edSvc.DropDownControl( angleControl );

                // Return the value in the appropraite data format.
                if( value.GetType() == typeof(double) )
                    return angleControl.angle;
                else if( value.GetType() == typeof(float) )
                    return (float)angleControl.angle;
                else if( value.GetType() == typeof(int) )
                    return (int)angleControl.angle;
            }
            return value;
        }

        // Draws a representation of the property's value.
        public override void PaintValue(System.Drawing.Design.PaintValueEventArgs e)
        {
            int normalX = (e.Bounds.Width/2);
            int normalY = (e.Bounds.Height/2);

            // Fill background and ellipse and center point.
            e.Graphics.FillRectangle(new SolidBrush(Color.DarkBlue), e.Bounds.X, e.Bounds.Y, e.Bounds.Width, e.Bounds.Height);
            e.Graphics.FillEllipse(new SolidBrush(Color.White), e.Bounds.X+1, e.Bounds.Y+1, e.Bounds.Width-3, e.Bounds.Height-3);
            e.Graphics.FillEllipse(new SolidBrush(Color.SlateGray), normalX+e.Bounds.X-1, normalY+e.Bounds.Y-1, 3, 3);

            // Draw line along the current angle.
            double radians = ((double)e.Value*Math.PI) / (double)180;
            e.Graphics.DrawLine( new Pen(new SolidBrush(Color.Red), 1), normalX+e.Bounds.X, normalY+e.Bounds.Y,
                e.Bounds.X+ ( normalX + (int)( (double)normalX * Math.Cos( radians ) ) ),
                e.Bounds.Y+ ( normalY + (int)( (double)normalY * Math.Sin( radians ) ) ) );
        }

        // Indicates whether the UITypeEditor supports painting a
        // representation of a property's value.
        public override bool GetPaintValueSupported(System.ComponentModel.ITypeDescriptorContext context)
        {
            return true;
        }
    }

    // Provides a user interface for adjusting an angle value.
    internal class AngleControl : System.Windows.Forms.UserControl
    {
        // Stores the angle.
        public double angle;
        // Stores the rotation offset.
        private int rotation = 0;
        // Control state tracking variables.
        private int dbx = -10;
        private int dby = -10;
        private int overButton = -1;

        public AngleControl(double initial_angle)
        {
            this.angle = initial_angle;
            this.SetStyle( ControlStyles.AllPaintingInWmPaint, true );
        }

        protected override void OnPaint(System.Windows.Forms.PaintEventArgs e)
        {
            // Set angle origin point at center of control.
            int originX = (this.Width/2);
            int originY = (this.Height/2);

            // Fill background and ellipse and center point.
            e.Graphics.FillRectangle(new SolidBrush(Color.DarkBlue), 0, 0, this.Width, this.Height);
            e.Graphics.FillEllipse(new SolidBrush(Color.White), 1, 1, this.Width-3, this.Height-3);
            e.Graphics.FillEllipse(new SolidBrush(Color.SlateGray), originX-1, originY-1, 3, 3);

            // Draw angle markers.
            int startangle = (270-rotation)%360;
            e.Graphics.DrawString(startangle.ToString(), new Font("Arial", 8), new SolidBrush(Color.DarkGray), (this.Width/2)-10, 10);
            startangle = (startangle+90)%360;
            e.Graphics.DrawString(startangle.ToString(), new Font("Arial", 8), new SolidBrush(Color.DarkGray), this.Width-18, (this.Height/2)-6);
            startangle = (startangle+90)%360;
            e.Graphics.DrawString(startangle.ToString(), new Font("Arial", 8), new SolidBrush(Color.DarkGray), (this.Width/2)-6, this.Height-18);
            startangle = (startangle+90)%360;
            e.Graphics.DrawString(startangle.ToString(), new Font("Arial", 8), new SolidBrush(Color.DarkGray), 10, (this.Height/2)-6);

            // Draw line along the current angle.
            double radians = ((((angle+rotation)+360)%360)*Math.PI) / (double)180;
            e.Graphics.DrawLine( new Pen(new SolidBrush(Color.Red), 1), originX, originY,
                originX + (int)( (double)originX * (double)Math.Cos( radians )   ),
                originY + (int)( (double)originY * (double)Math.Sin( radians ) ) );

            // Output angle information.
            e.Graphics.FillRectangle(new SolidBrush(Color.Gray), this.Width-84, 3, 82, 13);
            e.Graphics.DrawString("Angle: "+angle.ToString("F4"), new Font("Arial", 8), new SolidBrush(Color.Yellow), this.Width-84, 2);
            // Draw square at mouse position of last angle adjustment.
            e.Graphics.DrawRectangle(new Pen(new SolidBrush(Color.Black), 1), dbx-2, dby-2, 4, 4);
            // Draw rotation adjustment buttons.
            if( overButton == 1 )
            {
                e.Graphics.FillRectangle(new SolidBrush(Color.Green), this.Width-28, this.Height-14, 12, 12);
                e.Graphics.FillRectangle(new SolidBrush(Color.Gray), 2, this.Height-13, 110, 12);
                e.Graphics.DrawString("Rotate 90 degrees left", new Font("Arial", 8), new SolidBrush(Color.White), 2, this.Height-14);
            }
            else
            {
                e.Graphics.FillRectangle(new SolidBrush(Color.DarkGreen), this.Width-28, this.Height-14, 12, 12);
            }

            if ( overButton == 2 )
            {
                e.Graphics.FillRectangle(new SolidBrush(Color.Green), this.Width-14, this.Height-14, 12, 12);
                e.Graphics.FillRectangle(new SolidBrush(Color.Gray), 2, this.Height-13, 116, 12);
                e.Graphics.DrawString("Rotate 90 degrees right", new Font("Arial", 8), new SolidBrush(Color.White), 2, this.Height-14);
            }
            else
            {
                e.Graphics.FillRectangle(new SolidBrush(Color.DarkGreen), this.Width-14, this.Height-14, 12, 12);
            }

            e.Graphics.DrawEllipse(new Pen(new SolidBrush(Color.White), 1), this.Width-11, this.Height-11, 6, 6);
            e.Graphics.DrawEllipse(new Pen(new SolidBrush(Color.White), 1), this.Width-25, this.Height-11, 6, 6);
            if( overButton == 1 )
                e.Graphics.FillRectangle(new SolidBrush(Color.Green), this.Width-25, this.Height-6, 4, 4);
            else
                e.Graphics.FillRectangle(new SolidBrush(Color.DarkGreen), this.Width-25, this.Height-6, 4, 4);
            if( overButton == 2 )
                e.Graphics.FillRectangle(new SolidBrush(Color.Green), this.Width-8, this.Height-6, 4, 4);
            else
                e.Graphics.FillRectangle(new SolidBrush(Color.DarkGreen), this.Width-8, this.Height-6, 4, 4);
            e.Graphics.FillPolygon(new SolidBrush(Color.White), new Point[] { new Point(this.Width-7, this.Height-8), new Point(this.Width-3, this.Height-8), new Point(this.Width-5, this.Height-4) });
            e.Graphics.FillPolygon(new SolidBrush(Color.White), new Point[] { new Point(this.Width-26, this.Height-8), new Point(this.Width-21, this.Height-8), new Point(this.Width-25, this.Height-4) });
        }

        protected override void OnMouseDown(System.Windows.Forms.MouseEventArgs e)
        {
            // Handle rotation adjustment button clicks.
            if( e.X >= this.Width-28 && e.X <= this.Width-2 && e.Y >= this.Height-14 && e.Y <= this.Height-2 )
            {
                if( e.X <= this.Width-16 )
                    rotation -= 90;
                else if( e.X >= this.Width-14 )
                    rotation += 90;
                if( rotation < 0 )
                    rotation += 360;
                rotation = rotation%360;
                dbx=-10;
                dby=-10;
            }
            else
            {
                UpdateAngle(e.X, e.Y);
            }

            this.Refresh();
        }

        protected override void OnMouseMove(System.Windows.Forms.MouseEventArgs e)
        {
            if( e.Button == MouseButtons.Left )
            {
                UpdateAngle(e.X, e.Y);
                overButton = -1;
            }
            else if( e.X >= this.Width-28 && e.X <= this.Width-16 && e.Y >= this.Height-14 && e.Y <= this.Height-2 )
            {
                overButton = 1;
            }
            else if( e.X >= this.Width-14 && e.X <= this.Width-2 && e.Y >= this.Height-14 && e.Y <= this.Height-2 )
            {
                overButton = 2;
            }
            else
            {
                overButton = -1;
            }

            this.Refresh();
        }

        private void UpdateAngle(int mx, int my)
        {
            // Store mouse coordinates.
            dbx = mx;
            dby = my;

            // Translate y coordinate input to GetAngle function to correct for ellipsoid distortion.
            double widthToHeightRatio =  (double)this.Width/(double)this.Height;
            int tmy;
            if( my == 0 )
                tmy = my;
            else if( my < this.Height/2 )
                tmy = (this.Height/2)-(int)(((this.Height/2)-my)*widthToHeightRatio);
            else
                tmy = (this.Height/2)+(int)((double)(my-(this.Height/2))*widthToHeightRatio);

            // Retrieve updated angle based on rise over run.
            angle = (GetAngle(this.Width/2, this.Height/2, mx, tmy)-rotation)%360;
        }

        private double GetAngle(int x1, int y1, int x2, int y2)
        {
            double degrees;

            // Avoid divide by zero run values.
            if( x2-x1 == 0 )
            {
                if( y2 > y1 )
                    degrees = 90;
                else
                    degrees = 270;
            }
            else
            {
                // Calculate angle from offset.
                double riseoverrun = (double)(y2-y1)/(double)(x2-x1);
                double radians = Math.Atan( riseoverrun );
                degrees = radians * ((double)180/Math.PI);

                // Handle quadrant specific transformations.
                if( (x2-x1) < 0 || (y2-y1) < 0 )
                    degrees += 180;
                if( (x2-x1) > 0 && (y2-y1) < 0 )
                    degrees -= 180;
                if( degrees < 0 )
                    degrees += 360;
            }
            return degrees;
        }
    }

    public class AngleEditorTestControl : System.Windows.Forms.UserControl
    {
        private double int_angle;

        [BrowsableAttribute(true)]
        [EditorAttribute(typeof(AngleEditor), typeof(System.Drawing.Design.UITypeEditor))]
        public double Angle
        {
            get
            { return int_angle; }
            set
            { int_angle = value; }
        }

        public AngleEditorTestControl()
        {
            int_angle = 90;
            this.Size = new Size(190, 42);
            this.BackColor = Color.Beige;			
        }

        protected override void OnPaint(System.Windows.Forms.PaintEventArgs e)
        {
            if( this.DesignMode )
            {
                e.Graphics.DrawString("Use the Properties Window to access", new Font("Arial", 8), new SolidBrush(Color.Black), 3,2);
                e.Graphics.DrawString("the AngleEditor UITypeEditor by", new Font("Arial", 8), new SolidBrush(Color.Black), 3,14);
                e.Graphics.DrawString("configuring the \"Angle\" property.", new Font("Arial", 8), new SolidBrush(Color.Black), 3,26);
            }
            else
            {
                e.Graphics.DrawString("This example requires design mode.", new Font("Arial", 8), new SolidBrush(Color.Black), 3,2);
            }
        }
    }
}
Option Strict Off
Imports System.ComponentModel
Imports System.Drawing
Imports System.Drawing.Design
Imports System.Reflection
Imports System.Windows.Forms
Imports System.Windows.Forms.Design

' This UITypeEditor can be associated with Int32, Double and Single
' properties to provide a design-mode angle selection interface.
<System.Security.Permissions.PermissionSetAttribute(System.Security.Permissions.SecurityAction.Demand, Name:="FullTrust")> _
Public Class AngleEditor
    Inherits System.Drawing.Design.UITypeEditor

    Public Sub New()
    End Sub

    ' Indicates whether the UITypeEditor provides a form-based (modal) dialog, 
    ' drop down dialog, or no UI outside of the properties window.
    Public Overloads Overrides Function GetEditStyle(ByVal context As System.ComponentModel.ITypeDescriptorContext) As System.Drawing.Design.UITypeEditorEditStyle
        Return UITypeEditorEditStyle.DropDown
    End Function

    ' Displays the UI for value selection.
    Public Overloads Overrides Function EditValue(ByVal context As System.ComponentModel.ITypeDescriptorContext, ByVal provider As System.IServiceProvider, ByVal value As Object) As Object
        ' Return the value if the value is not of type Int32, Double and Single.
        If value.GetType() IsNot GetType(Double) AndAlso value.GetType() IsNot GetType(Single) AndAlso value.GetType() IsNot GetType(Integer) Then
            Return value
        End If
        ' Uses the IWindowsFormsEditorService to display a 
        ' drop-down UI in the Properties window.
        Dim edSvc As IWindowsFormsEditorService = CType(provider.GetService(GetType(IWindowsFormsEditorService)), IWindowsFormsEditorService)
        If (edSvc IsNot Nothing) Then
            ' Display an angle selection control and retrieve the value.
            Dim angleControl As New AngleControl(System.Convert.ToDouble(value))
            edSvc.DropDownControl(angleControl)

            ' Return the value in the appropraite data format.
            If value Is GetType(Double) Then
                Return angleControl.angle
            ElseIf value Is GetType(Single) Then
                Return System.Convert.ToSingle(angleControl.angle)
            ElseIf value Is GetType(Integer) Then
                Return System.Convert.ToInt32(angleControl.angle)
            End If
        End If
        Return value
    End Function

    ' Draws a representation of the property's value.
    Public Overloads Overrides Sub PaintValue(ByVal e As System.Drawing.Design.PaintValueEventArgs)
        Dim normalX As Integer = e.Bounds.Width / 2
        Dim normalY As Integer = e.Bounds.Height / 2

        ' Fill background and ellipse and center point.
        e.Graphics.FillRectangle(New SolidBrush(Color.DarkBlue), e.Bounds.X, e.Bounds.Y, e.Bounds.Width, e.Bounds.Height)
        e.Graphics.FillEllipse(New SolidBrush(Color.White), e.Bounds.X + 1, e.Bounds.Y + 1, e.Bounds.Width - 3, e.Bounds.Height - 3)
        e.Graphics.FillEllipse(New SolidBrush(Color.SlateGray), normalX + e.Bounds.X - 1, normalY + e.Bounds.Y - 1, 3, 3)

        ' Draw line along the current angle.
        Dim radians As Double = System.Convert.ToDouble(e.Value) * Math.PI / System.Convert.ToDouble(180)
        e.Graphics.DrawLine(New Pen(New SolidBrush(Color.Red), 1), normalX + e.Bounds.X, normalY + e.Bounds.Y, e.Bounds.X + (normalX + System.Convert.ToInt32(System.Convert.ToDouble(normalX) * Math.Cos(radians))), e.Bounds.Y + (normalY + System.Convert.ToInt32(System.Convert.ToDouble(normalY) * Math.Sin(radians))))
    End Sub

    ' Indicates whether the UITypeEditor supports painting a 
    ' representation of a property's value.
    Public Overloads Overrides Function GetPaintValueSupported(ByVal context As System.ComponentModel.ITypeDescriptorContext) As Boolean
        Return True
    End Function
End Class

' Provides a user interface for adjusting an angle value.
Friend Class AngleControl
    Inherits System.Windows.Forms.UserControl

    ' Stores the angle.
    Public angle As Double
    ' Stores the rotation offset.
    Private rotation As Integer = 0
    ' Control state tracking variables.
    Private dbx As Integer = -10
    Private dby As Integer = -10
    Private overButton As Integer = -1

    Public Sub New(ByVal initial_angle As Double)
        Me.angle = initial_angle
        Me.SetStyle(ControlStyles.AllPaintingInWmPaint, True)
    End Sub

    Protected Overrides Sub OnPaint(ByVal e As System.Windows.Forms.PaintEventArgs)
        ' Set angle origin point at center of control.
        Dim originX As Integer = Me.Width / 2
        Dim originY As Integer = Me.Height / 2

        ' Fill background and ellipse and center point.
        e.Graphics.FillRectangle(New SolidBrush(Color.DarkBlue), 0, 0, Me.Width, Me.Height)
        e.Graphics.FillEllipse(New SolidBrush(Color.White), 1, 1, Me.Width - 3, Me.Height - 3)
        e.Graphics.FillEllipse(New SolidBrush(Color.SlateGray), originX - 1, originY - 1, 3, 3)

        ' Draw angle markers.
        Dim startangle As Integer = (270 - rotation) Mod 360
        e.Graphics.DrawString(startangle.ToString(), New Font("Arial", 8), New SolidBrush(Color.DarkGray), Me.Width / 2 - 10, 10)
        startangle = (startangle + 90) Mod 360
        e.Graphics.DrawString(startangle.ToString(), New Font("Arial", 8), New SolidBrush(Color.DarkGray), Me.Width - 18, Me.Height / 2 - 6)
        startangle = (startangle + 90) Mod 360
        e.Graphics.DrawString(startangle.ToString(), New Font("Arial", 8), New SolidBrush(Color.DarkGray), Me.Width / 2 - 6, Me.Height - 18)
        startangle = (startangle + 90) Mod 360
        e.Graphics.DrawString(startangle.ToString(), New Font("Arial", 8), New SolidBrush(Color.DarkGray), 10, Me.Height / 2 - 6)

        ' Draw line along the current angle.   
        Dim radians As Double = ((angle + rotation + 360) Mod 360) * Math.PI / System.Convert.ToDouble(180)
        e.Graphics.DrawLine(New Pen(New SolidBrush(Color.Red), 1), originX, originY, originX + System.Convert.ToInt32(System.Convert.ToDouble(originX) * Math.Cos(radians)), originY + System.Convert.ToInt32(System.Convert.ToDouble(originY) * Math.Sin(radians)))

        ' Output angle information.
        e.Graphics.FillRectangle(New SolidBrush(Color.Gray), Me.Width - 84, 3, 82, 13)
        e.Graphics.DrawString("Angle: " + angle.ToString("F4"), New Font("Arial", 8), New SolidBrush(Color.Yellow), Me.Width - 84, 2)
        ' Draw square at mouse position of last angle adjustment.
        e.Graphics.DrawRectangle(New Pen(New SolidBrush(Color.Black), 1), dbx - 2, dby - 2, 4, 4)
        ' Draw rotation adjustment buttons.
        If overButton = 1 Then
            e.Graphics.FillRectangle(New SolidBrush(Color.Green), Me.Width - 28, Me.Height - 14, 12, 12)
            e.Graphics.FillRectangle(New SolidBrush(Color.Gray), 2, Me.Height - 13, 110, 12)
            e.Graphics.DrawString("Rotate 90 degrees left", New Font("Arial", 8), New SolidBrush(Color.White), 2, Me.Height - 14)
        Else
            e.Graphics.FillRectangle(New SolidBrush(Color.DarkGreen), Me.Width - 28, Me.Height - 14, 12, 12)
        End If
        If overButton = 2 Then
            e.Graphics.FillRectangle(New SolidBrush(Color.Green), Me.Width - 14, Me.Height - 14, 12, 12)
            e.Graphics.FillRectangle(New SolidBrush(Color.Gray), 2, Me.Height - 13, 116, 12)
            e.Graphics.DrawString("Rotate 90 degrees right", New Font("Arial", 8), New SolidBrush(Color.White), 2, Me.Height - 14)
        Else
            e.Graphics.FillRectangle(New SolidBrush(Color.DarkGreen), Me.Width - 14, Me.Height - 14, 12, 12)
        End If
        e.Graphics.DrawEllipse(New Pen(New SolidBrush(Color.White), 1), Me.Width - 11, Me.Height - 11, 6, 6)
        e.Graphics.DrawEllipse(New Pen(New SolidBrush(Color.White), 1), Me.Width - 25, Me.Height - 11, 6, 6)
        If overButton = 1 Then
            e.Graphics.FillRectangle(New SolidBrush(Color.Green), Me.Width - 25, Me.Height - 6, 4, 4)
        Else
            e.Graphics.FillRectangle(New SolidBrush(Color.DarkGreen), Me.Width - 25, Me.Height - 6, 4, 4)
        End If
        If overButton = 2 Then
            e.Graphics.FillRectangle(New SolidBrush(Color.Green), Me.Width - 8, Me.Height - 6, 4, 4)
        Else
            e.Graphics.FillRectangle(New SolidBrush(Color.DarkGreen), Me.Width - 8, Me.Height - 6, 4, 4)
        End If
        e.Graphics.FillPolygon(New SolidBrush(Color.White), New Point() {New Point(Me.Width - 7, Me.Height - 8), New Point(Me.Width - 3, Me.Height - 8), New Point(Me.Width - 5, Me.Height - 4)})
        e.Graphics.FillPolygon(New SolidBrush(Color.White), New Point() {New Point(Me.Width - 26, Me.Height - 8), New Point(Me.Width - 21, Me.Height - 8), New Point(Me.Width - 25, Me.Height - 4)})
    End Sub

    Protected Overrides Sub OnMouseDown(ByVal e As System.Windows.Forms.MouseEventArgs)
        ' Handle rotation adjustment button clicks.
        If e.X >= Me.Width - 28 AndAlso e.X <= Me.Width - 2 AndAlso e.Y >= Me.Height - 14 AndAlso e.Y <= Me.Height - 2 Then
            If e.X <= Me.Width - 16 Then
                rotation -= 90
            ElseIf e.X >= Me.Width - 14 Then
                rotation += 90
            End If
            If rotation < 0 Then
                rotation += 360
            End If
            rotation = rotation Mod 360
            dbx = -10
            dby = -10
        Else
            UpdateAngle(e.X, e.Y)
        End If
        Me.Refresh()
    End Sub

    Protected Overrides Sub OnMouseMove(ByVal e As System.Windows.Forms.MouseEventArgs)
        If e.Button = System.Windows.Forms.MouseButtons.Left Then
            UpdateAngle(e.X, e.Y)
            overButton = -1
        ElseIf e.X >= Me.Width - 28 AndAlso e.X <= Me.Width - 16 AndAlso e.Y >= Me.Height - 14 AndAlso e.Y <= Me.Height - 2 Then
            overButton = 1
        ElseIf e.X >= Me.Width - 14 AndAlso e.X <= Me.Width - 2 AndAlso e.Y >= Me.Height - 14 AndAlso e.Y <= Me.Height - 2 Then
            overButton = 2
        Else
            overButton = -1
        End If
        Me.Refresh()
    End Sub

    Private Sub UpdateAngle(ByVal mx As Integer, ByVal my As Integer)
        ' Store mouse coordinates.
        dbx = mx
        dby = my

        ' Translate y coordinate input to GetAngle function to correct for ellipsoid distortion.
        Dim widthToHeightRatio As Double = System.Convert.ToDouble(Me.Width) / System.Convert.ToDouble(Me.Height)
        Dim tmy As Integer
        If my = 0 Then
            tmy = my
        ElseIf my < Me.Height / 2 Then
            tmy = Me.Height / 2 - Fix((Me.Height / 2 - my) * widthToHeightRatio)
        Else
            tmy = Me.Height / 2 + Fix(System.Convert.ToDouble(my - Me.Height / 2) * widthToHeightRatio)
        End If
        ' Retrieve updated angle based on rise over run.
        angle = (GetAngle(Me.Width / 2, Me.Height / 2, mx, tmy) - rotation) Mod 360
    End Sub

    Private Function GetAngle(ByVal x1 As Integer, ByVal y1 As Integer, ByVal x2 As Integer, ByVal y2 As Integer) As Double
        Dim degrees As Double

        ' Avoid divide by zero run values.
        If x2 - x1 = 0 Then
            If y2 > y1 Then
                degrees = 90
            Else
                degrees = 270
            End If
        Else
            ' Calculate angle from offset.
            Dim riseoverrun As Double = System.Convert.ToDouble(y2 - y1) / System.Convert.ToDouble(x2 - x1)
            Dim radians As Double = Math.Atan(riseoverrun)
            degrees = radians * (System.Convert.ToDouble(180) / Math.PI)

            ' Handle quadrant specific transformations.           
            If x2 - x1 < 0 OrElse y2 - y1 < 0 Then
                degrees += 180
            End If
            If x2 - x1 > 0 AndAlso y2 - y1 < 0 Then
                degrees -= 180
            End If
            If degrees < 0 Then
                degrees += 360
            End If
        End If
        Return degrees
    End Function
End Class

Public Class AngleEditorTestControl
    Inherits System.Windows.Forms.UserControl
    Private int_angle As Double

    <BrowsableAttribute(True), EditorAttribute(GetType(AngleEditor), GetType(System.Drawing.Design.UITypeEditor))> _
    Public Property Angle() As Double
        Get
            Return int_angle
        End Get
        Set(ByVal Value As Double)
            int_angle = Value
        End Set
    End Property

    Public Sub New()
        int_angle = 90
        Me.Size = New Size(190, 42)
        Me.BackColor = Color.Beige
    End Sub

    Protected Overrides Sub OnPaint(ByVal e As System.Windows.Forms.PaintEventArgs)
        If Me.DesignMode Then
            e.Graphics.DrawString("Use the Properties Window to access", New Font("Arial", 8), New SolidBrush(Color.Black), 3, 2)
            e.Graphics.DrawString("the AngleEditor UITypeEditor by", New Font("Arial", 8), New SolidBrush(Color.Black), 3, 14)
            e.Graphics.DrawString("configuring the ""Angle"" property.", New Font("Arial", 8), New SolidBrush(Color.Black), 3, 26)
        Else
            e.Graphics.DrawString("This example requires design mode.", New Font("Arial", 8), New SolidBrush(Color.Black), 3, 2)
        End If
    End Sub
End Class

Remarques

La UITypeEditor classe fournit une classe de base que vous pouvez dériver et étendre pour implémenter un éditeur de type personnalisé pour l’environnement au moment du design. En règle générale, votre éditeur de type personnalisé interagit avec le PropertyGrid contrôle.

Les éditeurs de types personnalisés sont utiles dans les situations où un éditeur de valeurs de zone de texte est insuffisant pour sélectionner efficacement les valeurs de certains types.

Pour implémenter un éditeur de type d’interface utilisateur personnalisé au moment de la conception, vous devez effectuer les étapes suivantes :

  • Définissez une classe qui dérive de UITypeEditor.

  • Remplacez la EditValue méthode pour gérer l’interface utilisateur, le traitement des entrées utilisateur et l’attribution de valeur.

  • Remplacez la GetEditStyle méthode pour informer la fenêtre Propriétés du type de style d’éditeur que l’éditeur utilisera.

Vous pouvez ajouter une prise en charge supplémentaire pour peindre la représentation d’une valeur dans la fenêtre Propriétés en effectuant les étapes suivantes :

  • Remplacez la GetPaintValueSupported méthode pour indiquer que l’éditeur prend en charge l’affichage de la représentation de la valeur.

  • Remplacez la PaintValue méthode pour implémenter l’affichage de la représentation de la valeur.

  • Remplacez la méthode du UITypeEditor constructeur si l’éditeur doit avoir un comportement d’initialisation.

Notes

La UITypeEditor classe ne prend pas en charge les dispositions RTL (droite à gauche).

Pour plus d’informations sur l’amélioration de la prise en charge au moment de la conception, consultez Extension de la prise en charge Design-Time. Pour plus d’informations sur l’implémentation d’un UITypeEditor, consultez Vue d’ensemble des éditeurs de types d’interface utilisateur.

Constructeurs

UITypeEditor()

Initialise une nouvelle instance de la classe UITypeEditor.

Propriétés

IsDropDownResizable

Obtient une valeur indiquant si les éditeurs déroulants doivent être redimensionnables par l’utilisateur.

Méthodes

EditValue(IServiceProvider, Object)

Modifie la valeur de l'objet spécifié à l'aide du style d'éditeur fourni par la méthode GetEditStyle().

EditValue(ITypeDescriptorContext, IServiceProvider, Object)

Modifie la valeur de l’objet spécifié avec le style d’éditeur indiqué par la méthode GetEditStyle().

Equals(Object)

Détermine si l'objet spécifié est égal à l'objet actuel.

(Hérité de Object)
GetEditStyle()

Obtient le style de l'éditeur utilisé par la méthode EditValue(IServiceProvider, Object).

GetEditStyle(ITypeDescriptorContext)

Obtient le style de l'éditeur utilisé par la méthode EditValue(IServiceProvider, Object).

GetHashCode()

Fait office de fonction de hachage par défaut.

(Hérité de Object)
GetPaintValueSupported()

Indique si cet éditeur permet de peindre une représentation de la valeur d'un objet.

GetPaintValueSupported(ITypeDescriptorContext)

Indique si le contexte spécifié permet de peindre une représentation de la valeur d'un objet dans le contexte spécifié.

GetType()

Obtient le Type de l'instance actuelle.

(Hérité de Object)
MemberwiseClone()

Crée une copie superficielle du Object actuel.

(Hérité de Object)
PaintValue(Object, Graphics, Rectangle)

Peint une représentation de la valeur de l'objet spécifié sur la toile spécifiée.

PaintValue(PaintValueEventArgs)

Peint une représentation de la valeur d'un objet à l'aide du PaintValueEventArgs spécifié.

ToString()

Retourne une chaîne qui représente l'objet actuel.

(Hérité de Object)

S’applique à

Voir aussi