Share via


Event ID 4100 — TCP/IP Network Interface Connectivity

Applies To: Windows Server 2008

TCP/IP network interface connectivity allows your computer to communicate with other hosts on your network and the Internet. Connectivity might be full (Internet and intranet), partial (local subnet only), or non-existent.

Event Details

Product: Windows Operating System
ID: 4100
Source: tcpip
Version: 6.0
Symbolic Name: EVENT_TCPIP_CREATE_DEVICE_FAILED
Message: Unable to create device object %2. Initialization failed.

Resolve

Initialize TCP/IP

Refresh the protocol configuration on the network interface by disabling it and then enabling it again.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To disable and then re-enable the network interface:

  1. Click Control Panel, double-click Network and Sharing Center, and then click Manage network connections.
  2. Right-click the network interface you want to disable, and then click Disable.
  3. Right-click the network interface again, and then click Enable.

Verify

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To verify TCP/IP connectivity:

  1. Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
  2. Click Continue when prompted by User Account Control, and then provide the administrator password, if requested.
  3. Type ping followed by an IP address of another host on the network.
  4. If the ping command succeeds, connectivity is established.

Note:  Windows Firewall might prevent a succesful ping operation. You might need to configure a port exception for the ping to succeed.

TCP/IP Network Interface Connectivity

Networking