Set-NetEventPacketCaptureProvider
Set-NetEventPacketCaptureProvider
Modifies the configuration for a Remote Packet Capture provider.
Sintassi
Parameter Set: BySessionName
Set-NetEventPacketCaptureProvider [[-SessionName] <String[]> ] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [[-Level] <Byte> ] [[-MatchAnyKeyword] <UInt64> ] [[-MatchAllKeyword] <UInt64> ] [[-CaptureType] <CaptureType> {Physical | Switch | BothPhysicalAndSwitch} ] [[-MultiLayer] <Boolean> ] [[-LinkLayerAddress] <String[]> ] [[-EtherType] <UInt16[]> ] [[-IpAddresses] <String[]> ] [[-IpProtocols] <Byte[]> ] [[-TruncationLength] <UInt16> ] [[-VmCaptureDirection] <VmCaptureDirection> {Ingress | Egress | IngressAndEgress} ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: BySessionOfTheProvider
Set-NetEventPacketCaptureProvider [-AssociatedEventSession <CimInstance> ] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [[-Level] <Byte> ] [[-MatchAnyKeyword] <UInt64> ] [[-MatchAllKeyword] <UInt64> ] [[-CaptureType] <CaptureType> {Physical | Switch | BothPhysicalAndSwitch} ] [[-MultiLayer] <Boolean> ] [[-LinkLayerAddress] <String[]> ] [[-EtherType] <UInt16[]> ] [[-IpAddresses] <String[]> ] [[-IpProtocols] <Byte[]> ] [[-TruncationLength] <UInt16> ] [[-VmCaptureDirection] <VmCaptureDirection> {Ingress | Egress | IngressAndEgress} ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: ByTargetOfTheProvider
Set-NetEventPacketCaptureProvider [-AssociatedCaptureTarget <CimInstance> ] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [[-Level] <Byte> ] [[-MatchAnyKeyword] <UInt64> ] [[-MatchAllKeyword] <UInt64> ] [[-CaptureType] <CaptureType> {Physical | Switch | BothPhysicalAndSwitch} ] [[-MultiLayer] <Boolean> ] [[-LinkLayerAddress] <String[]> ] [[-EtherType] <UInt16[]> ] [[-IpAddresses] <String[]> ] [[-IpProtocols] <Byte[]> ] [[-TruncationLength] <UInt16> ] [[-VmCaptureDirection] <VmCaptureDirection> {Ingress | Egress | IngressAndEgress} ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: InputObject (cdxml)
Set-NetEventPacketCaptureProvider [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [[-Level] <Byte> ] [[-MatchAnyKeyword] <UInt64> ] [[-MatchAllKeyword] <UInt64> ] [[-CaptureType] <CaptureType> {Physical | Switch | BothPhysicalAndSwitch} ] [[-MultiLayer] <Boolean> ] [[-LinkLayerAddress] <String[]> ] [[-EtherType] <UInt16[]> ] [[-IpAddresses] <String[]> ] [[-IpProtocols] <Byte[]> ] [[-TruncationLength] <UInt16> ] [[-VmCaptureDirection] <VmCaptureDirection> {Ingress | Egress | IngressAndEgress} ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
Descrizione dettagliata
The Set-NetEventPacketCaptureProvider cmdlet modifies the configuration for a Remote Packet Capture provider.
Parametri
-AssociatedCaptureTarget<CimInstance>
Specifies the associated capture target as a CIM object. The capture target is one of the three following objects:
-- MSFT_NetEventNetworkAdapter
-- MSFT_NetEventVmNetworkAdapter
-- MSFT_NetEventVmSwitch
To obtain a capture target, use the Get-NetEventNetworkAdapter cmdlet, the Get-NetEventVmNetworkAdapter cmdlet, or the Get-NetEventVmSwitch cmdlet.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
named |
Valore predefinito |
none |
Accetta input da pipeline? |
True (ByValue) |
Accetta caratteri jolly? |
false |
-AssociatedEventSession<CimInstance>
Specifies the associated network event session, as a CIM object. To obtain the network event session, use the Get-NetEventSession cmdlet.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
named |
Valore predefinito |
none |
Accetta input da pipeline? |
True (ByValue) |
Accetta caratteri jolly? |
false |
-CaptureType<CaptureType>
Specifies the capture type. Acceptable values for this parameter are:
-- SaveToFile. Writes events to a local .etl file.
-- RealtimeRPC. Creates a real-time capture session and forwards the events to a remote host as they are recorded.
-- RealtimeLocal. Creates a real-time capture session and forwards the events to a local Event Tracing for Windows (ETW) listener as they are recorded.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
4008 |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-CimSession<CimSession[]>
Esegue il cmdlet in una sessione remota o in un computer remoto. Immettere un nome di computer o un oggetto di sessione, ad esempio l'output del cmdlet New-CimSession o Get-CimSession. Il valore predefinito è la sessione corrente nel computer locale.
Alias |
Session |
Obbligatorio? |
false |
Posizione? |
named |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-EtherType<UInt16[]>
Specifies an array of ether types. The most common ether types and their values are IPv4 (0800), IPv6 (86DD) and ARP (0806).
Alias |
none |
Obbligatorio? |
false |
Posizione? |
4011 |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-IpAddresses<String[]>
Specifies an array of IP addresses on which to filter. The packet capture provider logs network traffic that matches this filter.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
4012 |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-IpProtocols<Byte[]>
Specifies an array of one or more IP protocols, such as TCP or UDP, on which to filter. The packet capture provider logs network traffic that matches this filter.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
4013 |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-Level<Byte>
Specifies the level of Event Tracing for Windows (ETW) events for the provider. Use the level of detail for the event to filter the events that are logged. The default value for this parameter is 0x4. Acceptable values for this parameter are:
-- 0x5. Verbose
-- 0x4. Informational
-- 0x3. Warning
-- 0x2. Error
-- 0x1. Critical
-- 0x0. LogAlways
The provider must log the event if the value of the event is less than or equal to the value of this parameter.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
4005 |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-LinkLayerAddress<String[]>
Specifies an array of link layer, or Media Access Control (MAC), addresses. The packet capture provider logs network traffic that matches this filter.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
4010 |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-MatchAllKeyword<UInt64>
Specifies a bitmask that restricts the events that the provider logs.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
4007 |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-MatchAnyKeyword<UInt64>
Specifies keywords as a set of hexadecimal values. Keywords are flags that you can combine to generate values. Use a set of hexadecimal values of the keywords instead of the keyword names, and apply a filter to write ETW events for keyword matches.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
4006 |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-MultiLayer<Boolean>
Indicates whether the capture should occur at various layers in the stack. This setting has a value of $False by default.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
4009 |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-PassThru
Restituisce un oggetto che rappresenta l'elemento in uso. Per impostazione predefinita, il cmdlet non genera alcun output.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
named |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-SessionName<String[]>
Specifies the name of the session associated with the packet capture provider.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
1 |
Valore predefinito |
none |
Accetta input da pipeline? |
True (ByPropertyName) |
Accetta caratteri jolly? |
false |
-ThrottleLimit<Int32>
Specifica il numero massimo di operazioni simultanee che è possibile stabilire per eseguire il cmdlet. Se il parametro viene omesso o si specifica il valore 0
, Windows PowerShell® calcola un valore limite ottimale per il cmdlet basato sul numero di cmdlet CIM in esecuzione nel computer. Questo valore limite si applica solo al cmdlet corrente, non alla sessione o al computer.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
named |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-TruncationLength<UInt16>
Specifies the display length of each captured packet. The default size is 128 bytes.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
4014 |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-VmCaptureDirection<VmCaptureDirection>
Specifies the direction of network traffic for a Virtual Machine (VM) capture. I valori accettabili per questo parametro sono:
-- Ingress. Network traffic from a VM to a virtual switch.
-- Egress. Network traffic from a virtual switch to a VM.
Alias |
none |
Obbligatorio? |
false |
Posizione? |
4015 |
Valore predefinito |
none |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-Confirm
Richiede conferma prima di eseguire il cmdlet.
Obbligatorio? |
false |
Posizione? |
named |
Valore predefinito |
False |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-WhatIf
Mostra gli effetti dell'esecuzione del cmdlet. Il cmdlet non viene eseguito.
Obbligatorio? |
false |
Posizione? |
named |
Valore predefinito |
False |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
<CommonParameters>
Questo cmdlet supporta i parametri comuni: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer e -OutVariable. Per altre informazioni, vedere about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
<WorkflowParameters>
Questo cmdlet supporta i parametri comuni del flusso di lavoro seguenti: -PSParameterCollection, -PSComputerName, -PSCredential, -PSConnectionRetryCount, -PSConnectionRetryIntervalSec, -PSRunningTimeoutSec, -PSElapsedTimeoutSec, -PSPersist, -PSAuthentication, -PSAuthenticationLevel, -PSApplicationName, -PSPort, -PSUseSSL, -PSConfigurationName, -PSConnectionURI, -PSAllowRedirection, -PSSessionOption, -PSCertificateThumbprint, -PSPrivateMetadata, -AsJob, -JobName e –InputObject. Per altre informazioni, vedere about_WorkflowCommonParameters.
Input
Il tipo di input è il tipo degli oggetti che è possibile reindirizzare al cmdlet.
Output
Il tipo di output corrisponde al tipo di oggetti generati dal cmdlet.
Esempi
Example 1: Modify a packet capture provider
This example modifies a packet capture provider.
The first command uses the New-NetEventSession cmdlet to create a new session named Session01.
The second command uses the Add-NetEventProvider cmdlet to add a TCP/IP Net provider to the session.
The third command uses the Add-NetEventPacketCaptureProvider cmdlet to add a packet capture provider to a session named Session01.
The fourth command modifies the packet capture provider settings.
PS C:\> New-NetEventSession -SessionName "Session01"
PS C:\> Add-NetEventProvider -Name "Microsoft-Windows-TCPIP" -SessionName "Session01"
PS C:\> Add-NetEventPacketCaptureProvider -SessionName "Session01"
PS C:\> Set-NetEventPacketCaptureProvider -SessionName "Session01" -IpAddresses 182.168.0.1 -IpProtocol 6
PS C:\>
PS C:\>
PS C:\>
Argomenti correlati
Add-NetEventPacketCaptureProvider
Get-NetEventPacketCaptureProvider