Stop-PcsvDevice

Stop-PcsvDevice

Shuts down a remote hardware device.

Sintassi

Parameter Set: InputObject (cdxml)
Stop-PcsvDevice -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByComputerName
Stop-PcsvDevice [-TargetAddress] <String> [-Credential] <PSCredential> [-ManagementProtocol] <ManagementProtocol> [[-Port] <UInt16> ] [-AsJob] [-Authentication <Authentication> ] [-CimSession <CimSession[]> ] [-PassThru] [-SkipCACheck] [-SkipCNCheck] [-SkipRevocationCheck] [-ThrottleLimit <Int32> ] [-TimeoutSec <UInt32> ] [-UseSSL] [-Confirm] [-WhatIf] [ <CommonParameters>]

Descrizione dettagliata

The Stop-PcsvDevice cmdlet shuts down a remote hardware device by using Web Services for Management (WS-Management) or Intelligent Platform Management Interface (IPMI). The cmdlet puts the device in the Disabled state, which corresponds to a hard shutdown of the hardware device. Specify the remote hardware device by the management name or IP address, provide credentials necessary to shut down the remote hardware device, and specify which management protocol to use. The credentials must have administrator permissions on the remote hardware device.

Parametri

-AsJob

-Authentication<Authentication>

Specifies an authentication method to use for devices managed by using WS-Management. Do not specify this parameter for devices managed by using IPMI. I valori accettabili per questo parametro sono:

-- Basic
-- Digest
-- Default

If you specify Default for this parameter and a value of WSMAN for the ManagementProtocol parameter, the cmdlet uses Basic authentication.

-CimSession<CimSession[]>

Esegue il cmdlet in una sessione remota o in un computer remoto. Immettere un nome di computer o un oggetto di sessione, ad esempio l'output del cmdlet New-CimSession o Get-CimSession. Il valore predefinito è la sessione corrente nel computer locale.

-Credential<PSCredential>

Specifies a PSCredential object based on a user name and password. To obtain a PSCredential object, use the Get-Credential cmdlet. For more information, type Get-Help Get-Credential. This parameter specifies the credential for the remote hardware device.

-InputObject<CimInstance[]>

Specifies an array of devices, as MSFT_PCSVDevice objects, to manage. To obtain MSFT_PCSVDevice objects, use the Get-PcsvDevice cmdlet.

-ManagementProtocol<ManagementProtocol>

Specifies a management protocol used to communicate with a device. I valori accettabili per questo parametro sono:

-- WSMAN
-- IPMI

Refer to your hardware documentation for supported management protocols.

Specify WSMAN for devices that represent information by using Systems Management Architecture for Server Hardware (SMASH), Desktop and mobile Architecture for System Hardware (DASH), or Physical Computer System View profiles.

-PassThru

Restituisce un oggetto che rappresenta l'elemento in uso. Per impostazione predefinita, il cmdlet non genera alcun output.

-Port<UInt16>

Specifies a port on the remote computer to use for the management connection. If you do not specify a port, the cmdlet uses the following default values:

-- IPMI and WSMAN over HTTP. Port 623.
-- WSMAN over HTTPS. Port 664.

-SkipCACheck

Indicates that the client connects by using HTTPS without validating that a trusted CA signed the server certificate. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Do not specify this parameter unless you can establish trust in another way, such as if the remote computer is part of a network that is physically secure and isolated, or if the remote computer is a trusted host in a Windows Remote Management (WinRM) configuration.

-SkipCNCheck

Indicates that the certificate CN of the server does not need to match the host name of the server. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Specify this parameter only for managing devices by using WS-Management over HTTPS. Be sure to specify this parameter only for trusted computers.

-SkipRevocationCheck

Indicates that the cmdlet skips the revocation check of server certificates. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Be sure to specify this parameter only for trusted computers.

-TargetAddress<String>

Specifies the name or IP address of the management port on the remote hardware device. For server hardware, this is typically a dedicated Baseboard Management Controller (BMC) IP address. For other devices, like network switches, this is the IP address of their management port. For desktop and mobile devices, the BMC sometimes shares the same IP address as the computer.

-ThrottleLimit<Int32>

Specifica il numero massimo di operazioni simultanee che è possibile stabilire per eseguire il cmdlet. Se il parametro viene omesso o si specifica il valore 0, Windows PowerShell® calcola un valore limite ottimale per il cmdlet basato sul numero di cmdlet CIM in esecuzione nel computer. Questo valore limite si applica solo al cmdlet corrente, non alla sessione o al computer.

-TimeoutSec<UInt32>

Specifies how long to wait, in seconds, for a response from the remote hardware device. After this period, the cmdlet abandons the connection attempt.

-UseSSL

Indicates that the server connects to the target computer by using SSL. WSMAN encrypts all content transmitted over the network. Specify this parameter to use the additional protection of HTTPS instead of HTTP. If you specify this parameter and SSL is not available on the connection port, the command fails.

-Confirm

Richiede conferma prima di eseguire il cmdlet.

-WhatIf

Mostra gli effetti dell'esecuzione del cmdlet. Il cmdlet non viene eseguito.

<CommonParameters>

Questo cmdlet supporta i parametri comuni: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer e -OutVariable. Per altre informazioni, vedere   about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Input

Il tipo di input è il tipo degli oggetti che è possibile reindirizzare al cmdlet.

• Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice

  A MSFT_PCSVDevice object that is the target for the operation. To obtain a MSFT_PCSVDevice object, use the Get-PcsvDevice cmdlet.

Output

Il tipo di output corrisponde al tipo di oggetti generati dal cmdlet.

• Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice

  The cmdlet only returns an MSFT_PCSVDevice object if you specify the PassThru parameter.

Esempi

Example 1: Shut down a computer

This example shuts down a computer.

The first command uses the Get-Credential cmdlet to create a credential, and then stores it in the $Credential variable. The cmdlet prompts you for a user name and password. For more information, type Get-Help Get-Credential.

The second command shuts down the computer that has the management IP address 10.1.12.43 by using the IPMI management protocol. The command specifies the credential object, stored in the $Credential variable, needed to connect to the computer. By default, the cmdlet prompts you before it stops the remote hardware device.

PS C:\> $Credential = Get-Credential
PS C:\>Stop-PcsvDevice -TargetAddress "10.1.12.43" -Credential $Credential -ManagementProtocol IPMI

Argomenti correlati

Get-PcsvDevice

Restart-PcsvDevice

Set-PcsvDeviceBootConfiguration

Start-PcsvDevice